Solid wood furniture needs regular maintenance and cleaning, how to proceed?

The indoor humidity must be slightly higher than its own moisture content, so consumers should understand the moisture content parameters of solid wood furniture when buying furnitureAnd refer to the humidity of the use environment marked on the manual. The mortise and tenon structure is very important for solid wood furniture, once it loosens and falls off, solid wood furniture can not continue to be used.

Therefore, it is necessary to pay attention to check whether these joints have parts falling off, degumming, tenon breakage, tenon loosening, etc。If the screws and other parts fall off, you can clean the screw holes first, fill the holes with a thin wooden strip, and finally reinstall the screws. If the tenon is broken, it needs to be dealt with by a professional maintenance personnel.

Dust should be removed frequently, as dust rubs against the surface of solid wood furniture on a daily basis. It is best to use a clean, soft cotton cloth, such as an old white t-shirt or baby cotton cloth, etc. Remember not to wipe furniture with sponge or dishwashing utensils.

When dusting, use a soaked and wrung out cotton cloth, as it reduces friction and avoids scratching furniture, and also helps reduce the adsorption of static electricity to dust.

It is good for removing dust from the surface of furniture. However, it should be avoided that moisture remains on the surface of the furniture, and it is recommended to wipe it again with a dry cotton cloth. In order to remove traces from airborne contaminants, cooking fumes, smudges from handling and residues from glazing, we recommend using a special furniture cleaner

This solvent can also help remove excess wax.

Wax regularly, every 3 months, to wax the furniture. Before using polishing wax for furniture, check whether the surface of the paint layer is intact. For newer solid wood furniture, the surface dust should be wiped off with a muslin cloth first, and the stains that have been left for too long or are difficult to remove can be wiped with a cotton cloth dipped in a small amount of gasoline or alcohol.

Then use a small piece of cotton cloth dipped in an appropriate amount of polishing wax and apply it over a large area.

Then use a larger dry cloth to rub the wax evenly in circumferential pieces, before waxing, you should first use milder non-alkaline soapy water to wipe off the old wax, and the wax should not be too dense, otherwise it will clog the pores of the wood. Over-waxing can also damage the appearance of the coating。American solid wood furniture is simple and natural, dignified and elegant, but due to the change of wood moisture content, it may be deformed or cracked, so it needs special care, especially in this hot summer.

For example, it can not be directly exposed to sunlight for a long time, it cannot be too cold or extremely hot, and too dry and humid environments are not suitable for solid wood furniture.

If the temperature and humidity change is too large due to the frequent switching of the air conditionerEven qualified solid wood furniture products sometimes deform and crack. Solid wood furniture generally has poor heat resistance, so try to stay away from heat sources when using it. In general, it is necessary to avoid direct sunlight as much as possible, because strong ultraviolet rays will cause the paint surface of solid wood furniture to fade；In addition, heating and lamps that can emit strong heat will also deform solid wood furniture, so you should try to stay away from it; In addition, do not put hot cups, teapots and other things directly on solid wood furniture, otherwise it will burn solid wood furniture.

Solid wood furniture must be wiped on time, do not wipe with a wet rag, and ventilate on time.

It needs to be waxed regularly, cleaned and wiped with less water, and can not be scratched to put things with care.

It is very important to keep out of moisture and insects, otherwise the furniture will be eaten.

You can buy solid wood curing liquid, maintain it regularly, and pay attention to moisture-proof.

Pure solid wood furniture needs to be cleaned and kept in a ventilated and dry environment.

Wipe with a soft cloth and do not wipe with water, it will deform after wiping.

This is nothing special, don't use sharpness, you can wax it.

There is a special solid wood maintenance liquid, and you can give it to the furniture at home if you have nothing to do.

In general, there are professional cleaners and care oils for cleaning and care in the home.

Solid wood furniture needs regular maintenance, specific maintenance methods: solid wood furniture must do a good job in daily maintenance work, but it is not simply take a towel to wipe it, clean it, there is a lot of attention here. At the beginning, the cloth was used, and you can't take a cotton towel at will, you must choose a cotton and soft towel.

The first cloth used is to clean the dust from the surface of the solid wood furniture. Next, use a spin-off water semi-damp rag to clean the dust from the corners of the furniture. After wiping with a damp cloth, change the dry towel and wipe it all over.

There are some stains that can't be washed with a wet rag, you can wash it with milk to remove the stains, try to wipe it with a clean and neat cotton towel, otherwise it will get dirtier and dirtier.

In order to remove the marks on the surface of furniture caused by pollutants in the air, kitchen fumes during cooking, stains during operation and residues after varnishing, special furniture cleaners were used in the Pale period. These organic solvents can also assist in removing leftover wax. It can be cleaned once every half a month.

Log furniture generally must be polished and waxed on time maintenance, under normal circumstances, only once a quarter can be waxed, so that the furniture looks smooth and delicate and the surface is not easy to dust, cleaning is very simple. And it can lock the moisture of the wood, effectively preventing the cracking and deformation of the furniture. Before using special wax for furniture, check whether the surface is intact.

Use a muslin cloth to wipe the surface of the floating ash, and wipe the stains that have remained for too long or cannot be eliminated with a very small amount of pure cotton cloth dipped in gasoethanol. Then use a small piece of cloth dipped in appropriate special wax to coat the mortise and tenon on a large scale on the log furniture and the key, once loosened and bursting, the log furniture can not be applied again. Therefore, it is necessary to pay attention to check whether this joint shows the parts bursting, glue opening, mortise and tenon cracking, and loose planing.

If the mortise and tenon joint is cracked, it needs to be solved by a professional maintenance technician.

The specific maintenance method of solid wood furniture is to wipe its surface with the tea water after drinking, or to wax it regularly, which can play a good protective role.

You need to clean the surface regularly, wax the solid wood furniture regularly, and store it properly, preferably with some special cleaning agents.

We buy maintenance oil, and the rag is rubbed on the solid wood furniture, which should be particularly gentle and dry for a day, so that it can be better maintained.

The solid wood furniture on the market has a spray paint on the surface. In daily use, it is particularly important to maintain the paint film. Once the paint film is broken, it will not only affect the appearance, but also the structure of the furniture.

Therefore, in order to maintain the cleanliness of solid wood furniture, it is recommended to wipe the dust on the surface with a cotton cloth every day, including the dust on the corners of the furniture.

Avoid using alcohol and gasoline or other chemical solvents to remove stains If there are stains on the surface of solid wood furniture, do not try to wipe it with your feet, nor can you use alcohol, gasoline and other chemical solvents to remove the stain, it is recommended to wash it with warm boiled water as much as possible, and then gently apply wax in the original place after drying, and gently try to grind it several times to form a protective film.

When cleaning, do not use cleaning tools that collide with the surface of the furniture, and do not rub some hard metal products or sharp tools against the furniture. Otherwise, it will scratch the surface of the furniture and will be difficult to repair. Furniture should be inspected for good appearance before varnishing wax.

Wipe the dust on the surface with a muslin cloth first, and use a cotton cloth dipped in a few drops of steam alcohol to wipe the stains that have stayed for too long or are difficult to purify. Use a piece of cotton cloth to touch an appropriate amount of varnishing wax to smear a large area of leaves, and then occupy a larger dry cloth to evenly brush the wax in the ** with circles. Don't wax too often, or it will clog the pores in the wood.

The mortise and tenon structure can not be forgotten: the mortise and tenon structure is very important in solid wood furniture, once loosened and falling off, solid wood furniture should not continue to be used. Therefore, it is necessary to pay attention to check whether there are parts falling off, degumming, tenon cracking, tenon loosening, etc.

If the tenon is cracked, it needs to be dealt with by a professional maintenance personnel. For example, if a teapot is placed on furniture, it will burn the furniture, otherwise, it is better to add a thermal insulation pad.

You can use a damp cloth for maintenance, you can also use professional detergent for these maintenance, you can also buy some sheath for solid wood furniture, when scrubbing solid wood furniture, you must pay attention to the water temperature, do not use hot water, and often wax solid wood furniture.

The way to maintain it is to wax the wooden furniture regularly, apply it, apply some wood wax oil on the surface, clean it with some detergents, or wipe it with a rag frequently, and do not let direct sunlight.

You can use a special maintenance agent, wipe it with a rag, use a detergent, use a wet rag, or keep it away from heat, all of which can be maintained accordingly.

Solid wood furniture is afraid of high temperatures, so keep away from heat sources, avoid direct sunlight, air humidity should be appropriate, if it is too dry, there will be cracking, do not wipe with alcohol.

The maintenance method is that after a period of use, the dust on the surface of the solid wood furniture should be wiped off, and then covered with plastic wrap.

Cleaning problems, it is not easy to use rough rags when cleaning the surface of furniture, rough rags will lead to damage to the paint surface of the object, and the wood will be damaged. It is best to wipe with a clean and soft cotton cloth, after a period of time, you can use some furniture wax or walnut oil appropriately, and pay attention to avoid excessive moisture, resulting in moldy wooden furniture, when the weather is dry, at this time we should pay attention to humidification, water replenishment (mopping) for furniture, when customizing Elcometer home, the staff told us that when buying solid wood furniture, we must choose a large factory or a manufacturer with drying treatment in place! Because only when the source of the wood is dried and treated in place, the woodiness of the wood can be more stable, and the finished furniture will be less cracked and not deformed.

<> are inseparable from daily maintenance work. The maintenance of solid wood furniture affects the subsequent use effect and life, so how to maintain solid wood furniture? Solid wood furniture is the most easy to accumulate dust, but also easy to wear the surface, and many families still retain the habit of dusting with a feather duster, but in fact, solid wood furniture is not very easy to use, simple and easy to operate.

In fact, it is necessary to pay attention to the need not to wipe the surface of wood products with hard things, as long as the furniture wax or liquid wax is regularly applied to the surface of the furniture in daily use, and dried with a soft cloth until it is smooth and shiny.

In this case, the home should be humidified in advance to maintain the stability of the furniture. For southern customers, especially in the rainy season and high humidity, dehumidification should be done to avoid dampness and mildew of furniture. Do not use chemical detergents to clean solid wood furniture, if there is more dirt on the surface, you can wipe it with warm tea water, and then, wait for the water to evaporate and then wipe a layer of mahogany furniture wax to protect.

To clean every day, you can use a damp rag, you can use a dry rag. Regularly clean up areas that you don't normally clean. Be careful not to bump into it when moving.

Do not get out of the sun. Don't cut things on furniture. Be careful to re-paint when the paint is removed.

Do not use a rough rag when cleaning, and often polish with furniture oil wax. If there is a watermark on the furniture, cover the watermark with a clean damp cloth, and then carefully press the ironing cloth with an iron, so that the water collected in the watermark will evaporate and the watermark will disappear. In addition, solid wood furniture is not heat-resistant, we must pay attention to not being heated when we usually use it, if the heat forms a scar, scrub it with lemon, and then wipe it with a hot soft cloth to repair.

1. When cleaning daily, scrub with a soft rag or sponge dipped in warm soapy water, and then polish it with furniture oil wax when it is naturally air-drying. 2. The furniture is not wiped clean in time due to the dripping water, and after a period of time, the water penetrates into the void of the paint film and accumulates, making the paint film a watermark. In this case, just cover the watermark with a clean damp cloth, and then carefully press the ironing cloth with an iron, so that the water collected in the watermark will evaporate and the watermark will disappear.

3. Wooden furniture, even if it is painted, is not heat-resistant, and it is easy to form scars when heated, at this time, you can scrub with half a lemon, and then wipe it with a soft cloth soaked in hot water to repair the scars. 4. If you want solid wood furniture to have a lasting luster, waxing is very necessary, generally speaking, waxing once a quarter, using professional solid wood furniture polishing wax for regular maintenance. Do not use silicone polishes, as they can damage the coating of furniture, clog the pores of the wood and impede the breathability of the wood.

You can apply more paint, so that the surface can be particularly good, but also particularly clean and beautiful, so that there will be no bursting feeling.

The maintenance method of solid wood furniture is as follows:

Dust regularly. The simpler way to maintain solid wood furniture on a daily basis is to remove dust, and a soaked rag should be used when removing dust, because the wet cotton cloth can reduce friction and avoid scratching the furniture, and at the same time avoid the adsorption of static electricity to the dust, which is conducive to removing the dust on the surface of the furniture, but it should avoid water droplets staying on the surface of the furniture, and it is recommended to wipe it again with a dry rag.

Keep away from heaters. Solid wood furniture is afraid of high temperatures, long-term high temperature baking is easy to make the wood lose moisture, local cracking, deformation, paint film deterioration, try to place solid wood furniture at least 1 meter away from the heater.