What s going on with underfloor heating, is wooden flooring good on underfloor heating?

It is understood that low-temperature radiant floor heating is through the heating pipe buried under the floor - aluminum-plastic composite pipe or conductive pipe, the floor is heated to a surface temperature of 18 to 32 degrees Celsius, and the heating effect is evenly radiated to the indoor heat floor heating. Compared with traditional heating methods, it can be said that there are several advantages:

First of all, the room temperature is evenly distributed. With the heating method, the temperature difference in the room is minimal because the heat is evenly dissipated throughout the floor. Moreover, the indoor temperature gradually decreases from the bottom to the top, and the ground temperature is higher than the temperature of the human respiratory system, giving people a comfortable feeling of warm feet and cool heads.

Second, it is conducive to creating a healthy indoor environment. Heat sink heating is used, and the water temperature is generally above 70 degrees Celsius, but when the temperature reaches 80 degrees, dust will be generated, making the wall above the heating full of dust. Underfloor heating eliminates the convection of dust and turbid air, giving a fresh, warm and healthy environment.

Third, high efficiency and energy saving. Due to the large radiant surface of heating, the water supply temperature is relatively low, only 40 to 50 degrees. Moreover, it can overcome the shortcomings of the traditional heating sheet, and part of the heat is lost from the window, which affects the heating effect.

Fourth, save space. Since the heating pipes are all laid under the floor, the space for placing the heating sheets is saved, which is convenient for the placement of interior decoration and furniture.

Referred to as underfloor heating, pipes are buried under the ground, and the pipes are arranged in a dragon bend. This kind of heating saves the space occupied by the previous radiator and uses heat efficiently. However, if the repair is a bit troublesome, the ground must be chiseled.

Plastic foam, softly connected to the heating outlet, covered with plastic foam. Flooring is laid on top.

Enter the area and get the decoration for free**].

Floor heating is the most commonly used heating equipment for people in the north, and it is deeply loved by consumers because of its good heating effect. But many people will always have a variety of problems in the process of use, so it is best to learn more about this knowledge before using it. So, is underfloor heating hot all over the floor?

What are the misunderstandings about the use of floor heating? Let's take you to find out. Is the whole floor hot?Is the whole floor hotAfter the floor heating is turned on, the whole floor is basically hot, but the heat and combustion amount are not very evenly distributed.

This kind of heating is heated by using the heat medium in the radiant layer of the floor, and its temperature is transmitted in accordance with the way from the bottom to the top, which can give people a feeling of warmth and comfort, which is very in line with human physiology, so it is deeply loved by consumers. What are the misunderstandings about the use of floor heating 1, many people will think that the installation of floor heating will have an impact on the floor height, especially some high-rise residents, feel that the installation of floor heating will appear crowded space. In fact, this is a big misunderstanding, the floor heating occupies a maximum height of 8cm, as long as the installation is reasonable, it will not affect the living room space at all.

2. Floor heating will increase the load-bearing of the floor slab, which is also a misunderstanding of many people when using floor heating. Worried that the installation of floor heating will affect the load-bearing of the floor, in fact, this is also a wrong understanding, the installation of floor heating only needs to lay insulation boards and some pipe fittings, which has no impact on the load-bearing of the floor slab. 3. The reason why many families choose wall-hung boilers for heating is entirely because they feel that the floor heating pipes are easy to block.

This is also a common misunderstanding nowadays, you must know that the water in the circuit of the floor heating system is closed, and there is no need to replace it if there are no special circumstances, so there is no problem of blockage. Summary of the article: The above is all about whether the whole floor is hot and what are the misunderstandings about the use of floor heating, I hope it will help you.

Do the math how much it will cost you to renovate your home

It is recommended that you choose solid wood multi-layer flooring, which is more resistant to floor heat and more environmentally friendly than laminate flooring.

1. The surface layer of parquet is made of precious wood, and the texture, feel, temperature and humidity regulation are equivalent to that of solid wood flooring; Base material, using high-quality fast-growing materials, the core board is vertical and horizontal, symmetrically overlapped; Other auxiliary materials, the use of environmentally friendly paint, glue, etc. In addition, the industry-leading enterprises represented by Dayisu use science and technology and environmentally friendly structural treatment, German original Jianfu paint treatment and other technologies and processes.

It also enhances the stability and wear-resistance of parquet. It can be said that under the premise of not losing the natural texture of solid wood and comfortable foot feeling, the parquet is more stable and free from deformation, arching, cracking and other phenomena, which is a low price and high enjoyment. Hardwood parquet has the advantages of beautiful and natural solid wood flooring, comfortable foot feeling and good thermal insulation performance; It also overcomes the shortcomings of solid wood flooring due to the shrinkage of the monomer and easy to warp cracks.

Nowadays, in order to prevent the deterioration of the living environment, countries around the world generally attach importance to the protection of forest resources, and parquet can save rare wood resources compared with solid wood flooring. In addition, parquet is easy to install, and generally does not need to hit the keel, but requires ground leveling.

2: Solid wood floor is a ground decoration material formed by wood after drying and processing. The solid wood floor has a good foot feel, natural texture and color, good heat preservation, and slightly worse hardness.

The main factor that determines hardwood flooring** is the material. Due to the different characteristics of the tree species, the ** difference is very large. And because it is natural, the texture and color are quite different, and the wooden keel needs to be played when paving, which is relatively high, complex to install, and easy to deform is also an obvious deficiency of solid wood flooring.

Solid wood flooring is difficult to maintain, because it is easy to get wet, it can not be wiped with a damp cloth after it is dirty, and it is necessary to wax the floor often in order to avoid cracking after moisture.

Three: laminate flooring is made after the log is crushed, filled with glue, preservatives, additives, and then processed by high temperature and high pressure pressing by a hot press machine, and then processed into a long strip or square parquet floor, after slotting and milling, fine sanding paint.

There are many styles and colors of Dayi tree flooring, which can be directly bonded when paving, without laying keel, and the construction is simple. Moreover, the water resistance is stronger than that of solid wood flooring, which is not easy to be deformed by moisture, and can be wiped with a damp cloth after being dirty, and the wear resistance coefficient is correspondingly higher.

Solid wood composite is a compromise between the two types of flooring. Absorb the advantages of the above two, ** in between

The floor heating floor should meet the standard, and it can be made of multi-layer solid wood or reinforced composite. **Don't choose if it's too cheap, it's not up to standard, formaldehyde is exceeded, and it's too harmful.

Floor heating is generally made of parquet, which has a higher stability than that of solid wood. Moreover, the thermal conductivity of parquet is better than that of solid wood.

It is recommended that it is best not to use solid wood flooring, which has a certain amount of moisture in it, and it is easy to deform in the floor heating, and laminate flooring is still OK. . .

With multi-layer parquet, if there is a merchant who tells you that you can use solid wood flooring, it is a pit for you, and solid wood flooring is prone to shrinkage, cracking, twisting and other problems. The parquet has a wide regional adaptability and can be used in various climatic conditions, while the solid wood flooring is very prone to quality problems in the northern region. I recommend you to take a look at Armstrong's parquet, my house is also used for floor heating, and there is no problem until now.

Pay more attention to maintenance.

Four reasons why solid wood flooring is not recommended to do floor heating Reason 1: Because the moisture content of air solid wood flooring is high, it is easy to deform and other problems, even if it does not use geothermal heat, improper maintenance and laying will occur.

Reason 2: Reason 3: The effect of heat transfer, or more directly the problem of energy consumption, the thermal conductivity of the ground material is arranged in the order from large to small: natural stone, ceramic tiles, solid wood flooring, laminate flooring, solid wood flooring, chemical fiber carpet, pure wool carpet.

The smaller the thermal conductivity, the higher the operating costs to achieve the same heating effect. problems with installation; When the solid wood floor is paved, the keel should be beaten (for the feeling of the feet), and there is air in the middle of the keel, which will reduce the thermal efficiency. In addition, the threat of nailing to the underfloor heating system (both water and electricity) is great, and a special laying process is recommended.

Reason 4: The use and maintenance is too troublesome, solid wood has many advantages but too tired, if the geothermal use of solid wood is even more, heating and cooling need a degree to give the floor an adaptation process. I am tired of looking good, and I personally feel that it is not worth it. Resources.

The heating of the wooden floor is not as good as the effect of the floor tiles, and my house is the floor tiles, which are very hot.

It is not suitable, and it is estimated that it will be deformed and bulging.

The use of solid wood flooring is not as good as laminate flooring, laminate bamboo flooring, and floor tiles.

It is best not to use solid wood flooring in the room of floor heating, it should be decided according to the particularity of the geothermal heating method, and it is best to choose a special geothermal floor, for two reasons: First, the solid wood floor needs to be keeled, which produces a thicker air layer, and the wood itself is a poor conductor of heat.

Second, the fiber structure of wood has the characteristics of moisture absorption, and it is easy to deform when absorbing water and losing water under the change of temperature and humidity; After carbonization, it can solve its hygroscopicity, but it is brittle and has no foot feeling! There is knowledge and information on this above, so you might as well check it out.

Generally speaking, solid wood floors do not need underfloor heating:

1) Ordinary solid wood flooring cannot solve the problem of stress release under the change of floor heating temperature difference, and it will crack to a sparse extent.

Note] Some rare wood species are suitable for floor heating, such as cypress, but ** is very expensive.

2) Keel fixing problem when solid wood floor is paved.