Qinyuan 5598 water purifier filter element replacement

Smien tips to teach you the water purifier filter replacement cycle.

As water purification appliances become more and more well-known, it has become an indispensable necessity for thousands of households, more consumers have begun to pay attention to the health of their drinking water, while buying water purification appliances, many consumers do not know more about how often the water purifier filter should be replaced.

70% of the human body is water, so the quality of our drinking water has a great impact on people's health. Therefore, more and more households now choose to use water purifiers to filter tap water and improve water quality. However, when using a water purifier, you have to pay attention to the fact that the filter element inside must not be used expired.

The time to replace the filter element is related to the water quality and water consumption, the water quality is good, the time is long, and the water quality is poor. It is recommended to change this PP cotton every four to six months, and if it is not replaced, the quality of the filtered water cannot be guaranteed. If the filter element that has turned black and yellow is used for a long time, it will not only fail to purify the water quality, but will cause secondary pollution and have adverse effects on health.

It is obviously unscientific to infer the quality of water quality by the color of the filter element, because the water purifier on the market is generally composed of multiple filter elements to filter tap water, and different filter elements play different roles.

You can buy your own filter cartridge to replace.

Different products have different filter replacement cycles.

1. PP: 3-6 months.

2. Compressed carbon filter: 3-6 months.

3. UF: 24-36 months.

4. RO: 12-24 months.

5. Post-carbon filter: 3-6 months for ordinary and 10-12 months for silver-loaded carbon.

The filter element of the water purifier is generally KDF and activated carbon, and the filter element is to make the polluted water be cleaned to the state required for production and life, that is, to make the water reach a certain degree of cleanliness. Removes solid particles, kills bacteria, and removes harmful chemicals.

Press the setting button for 5 seconds, and then reset it when the filter element that needs to be reset flashes.

Rotate in the correct direction according to the marking, and the old filter can be removed. Replace all levels of filter cartridges regularly. According to the requirements of the water purifier instruction manual, the filter element that meets the service life or the upper limit of water filtration should be replaced in time.

Clean and disinfect water purifier pipes and water storage tanks regularly. After a period of use, contaminants may adhere to the water purifier pipes and storage tanks. Must be cleaned and disinfected.

It is best to have a professional qualified unit for cleaning and disinfection. If you do the cleaning and disinfection yourself, you must strictly follow the instructions in the product manual.

Summary. Hello, glad to answer for you. Dear, the display of Qinyuan water purifier is the reason for replacing the filter element; 1.In normal use, it is blue, and as time goes by, the light grid gradually turns off until the last grid turns red, and then the filter element needs to be replaced.

Hello, very high grip shed xing for you to answer. Dear, the display of Qinyuan water purifier is the reason for replacing the filter element; 1.The lead in the main section is often blue in use, and as time goes by, the light grid gradually turns out until the last grid turns red, and the filter element needs to be replaced.

2.It is blue in normal use and turns red over time until it finally turns off. It is important to note that the filter cartridge can be replaced as soon as it turns red.

3.In normal use, it is blue, and as time goes by, it turns red and flashes, and the filter can be replaced. 4.

Signal 2: Check if the water flow of the water outlet has become smaller If the water flow of the water purifier has become less, after excluding the water temperature and water pressure factors, the filter element is flushed and restarted, but the water flow has not returned to normal. Then it is very likely that the water purifier filter element is sending a "distress signal", and at this time, it is necessary to replace the water purifier with a new filter element in time.

Hope the above helps

If your problem has been solved, you can click "End Crack Key Service" in the upper right corner and give 5 stars to get 1 consultation coupon. If you have no questions, you can leave a message or ask me a question again

Hello, the following is the reset step of Qinyuan water purifier: 1Verify that the new filter is installed correctly and that the filter seal has been removed completely.

2.Install the filter back into the water purifier and tighten it. 3.

Plug the water purifier into the power supply, and turn on the water purifier switch when the potato is leaked. 4.Press the water purifier reset button (if any) or follow the instructions on the instruction manual to reset it.

5.The filter cartridge can be cleaned manually or automatically according to the instructions on the manual to ensure the normal operation of the filter element. If you are not sure how to reset your Qinyuan water purifier, please refer to the manual or contact Qinyuan customer service for assistance.

1. It must be noted that the water valve of the machine is closed (if there is no three-way ball valve on the water purifier, the main water valve at home needs to be closed), and then the faucet is opened to drain the water in the water purifier.

2. Use a wrench glove on the filter bottle and unscrew the filter bottle clockwise (when unscrewing the filter bottle, hold the filter bottle cap with the other hand to avoid loosening the connection of the pre-filter; Take out the dirty filter element and throw it away, and put it into a new PP cotton filter element; (PP cotton must be certified as a regular brand when purchasing, and generally regular brands are printed with steel seals).

3. Check whether the white plastic gasket inside the cap of the filter bottle and the black gasket outside the mouth of the filter bottle are tight, and if it is loose, press it tightly by hand.

4. Fill most of the bottle of tap water in the filter bottle, put the filter bottle back into the filter bottle cap, and tighten it.

5. Open the water valve, turn on the faucet for 5-6 seconds, and turn off the faucet. Check whether there is water leakage and water seepage at the connections of the water purifier, please close the water valve first, and contact the after-sales service before dealing with it.

The steps of the replacement sequence of the filter element of the Qinyuan water purifier are as follows:

Tools: Qinyuan 2803 water purifier, PPC composite filter element, PP cotton filter element, wrench.

1. The water purifier prompts to replace the filter element: the water purifier machine prompts that the filter element needs to be replaced when it is replaced. Liberal and cautious.

2. Open the back cover of the water purifier: Take the Qinyuan water purifier as an example, you need to open the back cover behind the water purifier, and the filial piety PPC composite filter element is available on the left and right sides, which needs to be removed and replaced separately.

3. Disassemble the filter element that needs to be replaced: please note that according to the prompts of the filter element to disassemble and assemble, taking the Qinyuan water purifier as an example, the removal of the filter element needs to be screwed to the left, that is, the counterclockwise direction is to remove the filter element, and to the right side is to install the filter element.

4. Install a new filter element: remove the outer packaging and then install the PP cotton filter element, the specific installation method is similar to the disassembly, the disassembly is counterclockwise rotation, and the installation is installed in the clockwise direction.

5. Install the back cover: When the filter element is replaced, you can install the back cover of the water purifier, please pay attention to the frequency of filter element replacement.

After replacing the filter element, the Qinyuan water purifier needs to be reset, and the specific process is as follows:1Make sure the replacement filter is secured and well sealed.

2.Press the "Reset" button and keep your hand on it. 3.

Plug in the power plug and power on, keep pressing the "Reset" button for 5 seconds. 4.Release the "Reset" button, at this time the water purifier has completed the reset and started to work normally.

It should be noted that when resetting, you need to press the "reset cavity combustion judgment" button first, then power on and hold for 5 seconds, and finally release the button. This sequence of operations is important. And Duan Xin's most Wu changed the last summary of the words:

After replacing the filter element, the Qinyuan water purifier needs to be reset, press and hold the "Reset" button, power on and hold for 5 seconds, and release the button to complete the reset <>

Hello, for your inquiry, after replacing the filter element of the Qinyuan water purifier, it is necessary to reset the operation to ensure that the water purifier returns to normal working state, the specific steps are as follows:1Disassembling the case:

First, push the shell left and right, take out the filter element of the whole spring Li Ruji, and lift the shell up near the faucet instantly. 2.Reset filter scrambler rotation button:

While removing the housing, keep pressing the filter reset knob on the front of the machine, and release the button once the old filter is removed. 3.Install a new filter:

Install the new filter cartridge into the water purifier and rotate clockwise to the tightest level. 4.Restore the flow of water:

After installing the new filter element, rotate the switch at the bottom of the water outlet at the bottom of the water purifier to make the water purifier start to discharge water normally. 5.Complete Reset:

Continue to press the maintenance button on the front of the machine for 5 seconds, and the use time of the filter element on the digital tube will be reset to zero after release. After completing the above operations, the Qinyuan water purifier can be used again. The purpose of the reset operation is to reset the filter used time recorded by the machine, to ensure that the machine can accurately monitor the use of the filter element, and to remind the filter element to be replaced in time