-
It's best not to keep charging any longer.
Replace the charging pad to see if it is a charger or a plug-in board, or if the mobile phone interface has a mushy smell, if it is a mobile phone or charger, it is recommended that you contact the after-sales service as soon as possible.
Mobile phone charging knowledge:
The first charge does not have to be charged for 12 hours, it only needs to be fully charged.
It can actually be charged at any power level, and it has little effect on the battery.
It is best to have a complete release and charging process once a week, that is, from the red battery to the full charge, and it is best to achieve a battery run out once a week, and then fully charge.
The function of overshoot protection for the mobile phone, but it is still recommended to unplug the mobile phone after it is fully charged, and it is not recommended to charge it for a long time.
When charging to 100%, unplugging the charger is the best moment, charging 100% and charging for another hour, the battery power when unplugging the charger is not just 100% full, that is, after it is fully charged, the iPhone has entered the overshoot protection and has stopped charging, and the next time is only the battery consumption process, so there is no need to charge more.
When the mobile phone is too low, you should stop playing with the phone or talking in time and charge it as soon as possible to maintain the life of the battery.
-
It's best not to use it and stop charging quickly.
It may be that the temperature of the charger is high, and the load overload has burned out the configuration inside. There will be a burnt smell, and when you encounter a burnt smell, you should pay attention to it quickly, it may cause a disaster, and it is very dangerous to play with the mobile phone while charging.
The charger may have been used for a long time, aging, or it may be a problem inside the mobile phone, you can go to the mobile phone store to change a new charging interface and buy a new charger, so that it is much safer to use.
-
Then hurry up and stop charging, it may be that the temperature is high, and the configuration inside is burned out, so there will be a burnt smell, and if you encounter a burnt smell in the future, you should pay attention to it quickly, because it may lead to a disaster, it is very dangerous, the charger may have been used for a long time, aging, it is recommended to consider changing to a new one, so that it is much safer to use, good luck.
-
LeTV quality is rubbish. In the future, this kind of brand will be eliminated. I bought it for half a month, and I can't return it, right? Anyway, you try! And you have to hurry up and ask for a return! Otherwise, it will be difficult to do anything when the time passes. Under.
-
1.It is caused by too many processes running in the background. After giving it a try, if you use Cheetah Memory Master to accelerate with one click, you can reduce a lot of processes running in the background. It won't be very hot if you charge it again.
2.In addition, the process and the program are two different things, after we crossed the app, we just closed the program, but many associated processes were not closed, so the cache will be less and less, the more processes the processor runs, plus charging, it will naturally be hot, and if you turn on the 3G or 4G network, the charging will be hotter.
3.Finally, don't use Cheetah or Memory Manager often, because the system will judge whether it is too much memory and will close the process by itself. If you force the process with any other software too often, it will reduce the lifespan of your phone.
4.It is also normal to have occasional heat generation while charging, because there may be times when the voltage instability (too high or too low) causes the input current to be too large or too small.
Note: When charging, it is recommended not to play with the mobile phone, because this will lead to a large current through the mobile phone circuit, and it will also heat up or even get hot.
1. The hazards of mobile phone battery heating:
1.Prolonged battery heating can cause the phone's internal parts to heat up, causing the phone to restart or hang up on a call.
2.If the mobile phone battery is heated for a long time, the heat of the battery itself will increase, if it is sealed (nokia and the like are not sealed, the battery is directly loaded into) the battery will make its internal air expand violently, resulting in the battery like an external protrusion, which will seriously make the battery**.
3.Prolonged heating of the mobile phone battery will accelerate the aging process of the mobile phone itself and shorten its lifespan.
Causes, hazards, prevention and solutions of mobile phone battery heating 2
Mobile phone battery heating prevention and solutions:
2. Prevention methods:
1.It is normal for the phone to generate no more than 60 at normal room temperature, and the battery will not be damaged.
2.It is not advisable to use a high-current charger for too long, as charging for too long will damage the battery and generate heat.
3.It is best to use the charger in an original or quality reputable product.
4.If you are not in a hurry to use it, it is recommended to charge it with a base charger (slow charging mode) to avoid heating the battery.
5.If you feel that the phone is a little hot when using the phone to listen to *** or battery charging, if it exceeds 60, immediately return to the standby state or change the battery, and unplug the charger immediately if it is charging.
3. Solution:
1.If the mobile phone battery has been charged and bulging, there is also a way to solve it. It is to use your fingers to find the gap of the battery first (the back of the mobile phone battery is close to the charging electrode of the mobile phone, and it is a little soft when pressed), and poke a small hole with the target to let the air inside run out.
2.Throw away another battery to buy.
There are several factors that affect the charging speed of a mobile phone: >>>More
The steps are as follows: 1. Use a hair dryer to blow around the phone for about 5 minutes, as shown in the figure below. >>>More
Dial in ** to enter MTK engineering mode.
2.Enter the project mode, it's all in English, then swipe left on the lower screen and you'll see WLAN and WLAN CTIA. >>>More
1 If it is not an all-in-one machine, take out the battery, charge it with universal charging for 15 minutes, and turn it on to try it. >>>More
How to find the lost LETV mobile phone: Coolpad and LETV mobile phones come with a "Find Device" function, which is mainly used to ring, lock, and clear data operations on the mobile phone after the mobile phone is accidentally lost. Here's how to use it: >>>More