The printer is dormant and has a good connection to the computer, but it just can t print the file

The printer is in a dormant state, and the connection with the computer is good, but the file cannot be printed, and the solution is as follows:

1. Try to update the driver of the printer.

2. Some printers have sleep mode function, turn off the printer and turn it back on, and restart the computer.

3. Replace other computer tests.

4. There is a problem with the quality of the printer itself, and the main control board is faulty, resulting in a dormant failure, which is a hardware failure, and it is necessary to contact the after-sales service for detailed inspection and maintenance.

First, whether the printing is paused, right-click on the printer, select Online, second, make sure that the printer and the computer are connected normally, check whether the port settings are correct, and third, install the printer driver from the new.

Dear Lenovo users:

Try updating the printer's driver. To update the driver, you need to uninstall the old driver before installing it. If it doesn't work, you can try using an older version of the driver. Lenovo official website driver**:

Think Forum:

Lenovo Community.

Summary. 1. The solution to the deep sleep of the printer is to turn the printer back on. Deep sleep is an energy-saving mode for printers in which the printer's energy consumption is minimized.

When the device is idle, you can set a sleep time to reduce power consumption. If you try to print or copy in sleep mode, there will be a short delay when the melt unit warms up to operating temperature.

2. If you want to turn off the sleep mode, press the Start and Option keys at the same time in the Function setting key during the idle time (00 99 minutes). If the device is in sleep mode when you change the sleep time, the new settings will take effect the next time the device is copied, printed, or turned off and on. In deep sleep mode, it does not affect the normal use of the machine and consumes the lowest power.

What should I do if the printer is in a dormant state? Please advise!

1. The solution to the deep sleep of the printer is to turn the printer back on. Deep sleep is an energy-saving mode for printers, and the energy consumption of the printer can be minimized in this mode. When the device is idle, you can set a sleep time to reduce power consumption.

If you try to print or copy in sleep mode, there will be a short delay when the melt unit warms up to the operating temperature. 2. If you want to turn off the sleep mode, press the Start and Option keys at the same time in the Function setting key during the idle time (00 99 minutes). If the device is in sleep mode when you change the sleep time, the new settings will take effect the next time the device is copied, printed, or turned off and on.

In the deep sleep mode, it does not affect the normal use of the machine, and the power consumption is minimal.

1.Open the PC Start option and click to select Settings. 2.

On the page that appears, click to select the Device option. 3.Swipe down the page and click to select Hongshen [Devices and Printers].

4.Find the [Printer] you want to use, and there will be [Computer Name] below to find the computer according to the name. 5.

Unsleep the connected shared computer, or directly [restart] the shared computer. 6.In the pop-up dialog box, click the [Next] option.

It is normal for the printer to be in a dormant state, when the printer is not used for a long time, the printer will automatically enter the sleep state, and when the print command is sent again, the printer will be woken up and execute the print command. This design is low-carbon and environmentally friendly.

Solution: Restart the printer to solve the problem, in deep sleep mode, the printer can reduce power consumption, which is equivalent to energy-saving mode, when the device is idle for a long time, this mode will be activated, so if the printer is not used for a long time, it is recommended to turn off the power of the printer.

Precautions for the use of equipment: 1. The ink cartridge of the printer is the main consumable, and the ink cartridge needs to be replaced in time when the ink cartridge is exhausted, it is recommended to use the ink cartridge produced by the original factory, which has good compatibility with the equipment, and the third-party ink cartridge may not match the machine, in addition, the quality of the ink is also problematic.

2. On inkjet printers, the printhead is easy to block, and there is generally an automatic cleaning function, and the nozzle needs to be cleaned regularly.

3. The printer cannot print, it may be that there is a problem with the printing paper, such as the size of the printing paper does not meet the requirements, and the printing paper is uneven, so you can replace the printing paper to solve it.

4. The printer is not used for a long time and needs to be started regularly to avoid the aging of equipment parts.

Data expansion: The basic working principle of inkjet printers is to generate small ink droplets first, and then use the inkjet head to guide the fine ink droplets to the set position, the smaller the ink droplets, the clearer the printing. The basic principle seems simple, but the operation is not so simple.

See if there is a problem with the hardware, first check the connection line between the printer and the computer, if there is no problem, check whether there is a problem with the printer driver, and slowly troubleshoot, if it still doesn't work, it is estimated that there is a problem with the printer.

Your in-depth script is not a child, the movie can't be printed, then you just turn off and restart it.

The deep sleep of the printer may be in a state of feigned death without the printer for a long time, and the printer can be restarted.

What should I do if the printer is in a dormant state? Please advise!

Dear, what should I do if the printer shows hibernation1Open the bottom left corner of your computer"The system starts", point"Settings"2.On the settings screen, click"equipment"3.

In the device interface, I choose it"Related settings"at the point"Devices and printers"4.In the printer window, I choose it"Print segment dust machine"Right-click and select from the menu"Printer properties"5.On the Properties page, select the Advanced tab, select "Always available", select "Use spooling", and then click "Start printing now"6

After the setting is completed, click "Apply" and then "OK".