What does quenching mean in the air conditioner menu? Is it controlled by the set temperature?

The so-called "quenching" is the meaning of "rapid cooling and cooling".

Selecting the "quenching" mode, the air conditioner will run with the highest frequency, highest wind speed and maximum capacity output from the time it is turned on to reach the set temperature, which is theoretically the "fastest" cooling method, which can achieve the room temperature to reach the set temperature in the shortest time.

Quenching mode is also limited by the set temperature of the air conditioner, which will stop cooling operation when the temperature in the room reaches the set temperature during a period of quenching.

For household air conditioners, only forced refrigeration is not subject to the set temperature; Forced refrigeration options are generally used when repairing air conditioners, and forced refrigeration and quench are different, so don't confuse.

Quenching means on behalf of forced refrigeration, when the quenching is turned on, the compressor is forcibly started, has been in the refrigeration state, unless the compressor is broken or protected, and can only be stopped after turning off the quenching, this operation is not controlled by temperature control, and naturally it is not controlled by the set temperature. It is recommended not to open it as a last resort, and the system with temperature control is a kind of protection for the compressor or the system.

"Quenching" is actually no different from setting the temperature to the lowest for the user.

It's just a "shortcut function", just a shortcut key for the computer, because you need to quickly lower the indoor temperature, if the required temperature is 20, then turn on the "quenching" and set the temperature drop time of 20 temperature is the same, not quenching is fast, setting the refrigeration temperature to set 20 is slow. And when the temperature drops to a certain extent, people can't stand it, and at this time they still need to turn off the "quenching" function.

It is better to say that it is a "shortcut function", or it is a "new" sentimental hype, or a "gimmick" or a "flicker" of commercial behavior.

Quenching is to increase the air volume of the air outlet. Generally, it is pressed when it is just turned on, and the time set by each brand is different, and it is generally automatically turned off after five minutes, and it is controlled by the set temperature.

Turning on quench cooling means cooling without sensor control until this function is canceled, regardless of the set temperature.

Do not use quenching at ordinary times, and only use this function when the maintenance worker is overhauling the air conditioner.

Turning on quenching means cooling all the time without sensor control.

Until this feature is canceled.

It is not affected by the set temperature.

Cooling control technology, by automatically sensing the outside temperature, adjust their working status at any time, to prevent users from feeling too low and causing unnecessary energy waste.

The functions of Mitsubishi Electric air conditioner's cooling control are as follows:

Ten minutes before the start of operation, the air deflector is supplied downward to cool the activity area of the person and cool the human body first. When the cooling sensation reaches a certain level, the air is sent upwards to cool the whole room. According to the temperature change of the air supply outlet, the upper and lower wind direction is adjusted, which not only avoids overcooling, but also prevents the air conditioning disease caused by blowing cold air for a long time, and protects human health.

The principle of cooling control.

After turning on the cooling control, ten minutes before the start of operation, the air deflector will supply air downward to cool the person's activity area and cool the human body first. When the cooling sensation reaches a certain level, the air is sent upwards to cool the whole room. According to the temperature change of the air supply outlet, the upper and lower wind direction is adjusted, which not only avoids overcooling, but also prevents the air conditioning disease caused by blowing cold air for a long time, and protects human health.

Cooling control technology, by automatically sensing the outside temperature, adjust their working status at any time, to prevent users from feeling too low and causing unnecessary energy waste.

1. Cooling control can save energy.

Cooling control is enabled in automatic mode similar to fully automatic inverter air conditioning, there are some intelligent control meanings, mainly according to the indoor temperature difference and the set temperature difference, to achieve, quenching, high-speed wind - quenching, medium-speed wind - low cooling, low vulgar wind, these three stages are realized.

2. Avoid overcooling.

Ten minutes before the start of operation, the wind deflector is supplied with air downwards to cool the activity area of the person in a centralized manner, cooling the human body first, and then sending air upwards to cool the whole room when the cool feeling reaches a certain level.

3. Protect human health.

The cooling control adjusts the upward and downward wind direction according to the temperature change of the air supply outlet, which prevents the air conditioning disease caused by blowing cold air for a long time.

Maintenance during start-up

After the air conditioner is turned on, the maintenance times during the air conditioner start-up process are determined by many factors such as environmental conditions, climatic conditions, number of hours of start-up, surrounding dust, air cleanliness, and whether the room is clean. The environmental conditions are not good, the weather is hot, the air conditioner is outdated, the air conditioner is turned on for a long time, and the number of maintenance during the air conditioner start-up process increases, usually once every month and a half.

If the environmental conditions are good, the air conditioner is relatively new, there is less dust in the air, the air conditioner is turned on reasonably, and the electric fan is used alternately, the maintenance cycle can be appropriately extended, from the start of the air conditioner to the shutdown of the air conditioner for maintenance 1-2 times. Maintenance should be careful and careful, leaving no dead ends. Comply with the specifications, improve the refrigeration speed and refrigeration effect, and achieve energy saving, freshness and comfort.

The so-called cooling control, is enabled in automatic mode, this is a fooling word, similar to automatic inverter air conditioning, belongs to the category of energy saving, there are some intelligent control meaning, mainly according to the indoor temperature difference and the set temperature difference, to achieve, quenching, high-speed wind - quenching, medium-speed wind - low cold, low vulgar wind, these three stages to achieve, the general two stages, before and after two, so there is no mystery at all, but it can still save some electricity.

Button function.

1) "On and off" button: press to turn on when standby to enter the running state, press to turn off after turning on and enter the shutdown standby state;

2) "Mode" button: After powering on, press this button, and the mode will cycle in order according to "Auto, Hot, Auto"; Low wind, medium stroke, high wind, automatic refrigeration, dehumidification, air supply system.

3) "Wind speed" button: press this button, the wind speed of the internal fan will be circulated in the "automatic" mode;

4) "Wind Direction" button: press this button, the angle of the air deflector will be cycled in order according to the "Auto Position [4] Position [5] Auto" mode; Location [1] Location [2] Location [3].

5) "Swing wind" button: press this button, the swing wind can be set to continuous swing and jog two ways of circulation;

6) "Temperature" button: press once to set the temperature to drop by one degree, control range: 16 -31, no combo function;

7) "Temperature" button: press once to set the temperature to rise by one degree, control range: 16 -31, no combo function;

8) "Timing on" key: after the time is set, press the "timer on" button, the digital display area displays the last set timer on time, through the "hour" key and "minute" key to adjust the set time, the air conditioner is turned on to the set time; Press the "timer on" button again to cancel the timer on setting;

9) "Timing off" key: After the time is set, in the boot state, press the "timing off" button, the digital display area displays the last set timing shutdown time, adjust the set time through the "hour" key and the "minute" key, and the air conditioner is shut down to the set time; Press the "Timer Off" button again to cancel the timer off setting;

10) "Hour" button: in the state of timing and time setting, press once to increase one hour, there is a combo function;

11) "Minute" button: in the state of timing and time setting, press once to increase ten minutes, there is a combo function;

12) "Sleep" button: press this button, the remote control will display the sleep mode setting, and the " " symbol will be displayed in the sleep display area, the indoor fan will automatically turn to low wind, and the sleep will end after 8 hours, the sleep symbol will be canceled, and the indoor fan will return to the original wind speed operation; Press the "Sleep" button again or press the "Mode" button or the "Wind Direction" button once to exit the sleep function;

13) "Reset" button: press this button with a small round bar with a diameter of 1mm, and the remote control will be restored to factory settings;

14) "Time" button: press this button with a small round bar with a diameter of 1mm to enter the time setting state, after setting, press this button again to indicate that the setting is completed and exit the time setting;

Note: Every time the remote control button is effectively operated, the LCD screen displays the symbol of the transmitted signal "" and disappears after one second.

The so-called cooling control, is enabled in automatic mode, this is a fooling word, similar to automatic inverter air conditioning, belongs to the category of energy saving, there are some intelligent control meaning, mainly according to the indoor temperature difference and the set temperature difference, to achieve, quenching, high-speed wind - quenching, medium-speed wind - low cold, low vulgar wind, these three stages to achieve, the general two stages, before and after two, so there is no mystery at all, but it can still save some electricity.

It detects the room temperature and automatically controls the operating program of the air conditioner.

Don't use your brains from the air conditioner, it's basically in vain.

Give you a good plan: make a power master control switch in each room, it is recommended to use a room card with a chip (the previous hotel used to take the power card is not good, that way as long as you insert a business card, wooden comb and other things can get electricity), guests must use this card to open the door, and each room only issued a card, guests need to insert this card after opening the door, the room will have electricity, so as to ensure that after the guest leaves the room, cut off all electrical appliances, including air conditioning.

This method is the only way to save electricity in the hotel, because you can't always be a guest in the room, and you are not allowed to use the air conditioner.

Hope this method works for you.

Quenching is when the machine is automatically set to run at maximum power, and this function cannot be changed. However, quenching can quickly lower the room temperature, which is shorter than the time to cool down slowly, so in terms of power consumption, it does not require electricity.

26 degrees is fine, you can break that key; There are not many quenching and ordinary ones; If you can, buy an electric fan.

No downtime in the strongest state without temperature control.

That is to say, you just came back from work and it was very hot, and you want to cool the air conditioner quickly

The "quenching" function means "rapid cooling". When this feature is turned on, the room can quickly cool down, even when the temperature is very high. It works by the air conditioner commanding the compressor to run at full speed as soon as it is turned on.

Hello! This quenching function is to turn on the maximum power of the air conditioner to achieve the purpose of rapid cooling.

Then this key, its main function is to make the compressor work quickly to achieve a very good refrigeration effect.

This function is to quickly cool down the air and cool it down. It can quickly achieve the effect of refrigeration.

The so-called cooling control, is enabled in automatic mode, this is a fooling word, similar to automatic inverter air conditioning, belongs to the category of energy saving, there are some intelligent control meaning, mainly according to the indoor temperature difference and the set temperature difference, to achieve, quenching, high-speed wind - quenching, medium-speed wind - low cold, low vulgar wind, these three stages to achieve, the general two stages, before and after two, so there is no mystery at all, but it can still save some electricity.