What should I do with the tablet flashing machine? What s going on with tablet flashing

The machine is connected to the computer, and the installation tool is installed. Initiate.

When the "Flash Tool" automatically recognizes the "tablet".

Press "Prompts" to do it!

Any artificial shutdown or power outage in the middle of the process will make the tablet "brick" (garbage).

Firmware addresses of common tablets: Onda tablet firmware**, Taipower tablet firmware**, Blue Devil tablet firmware**, Aino tablet firmware**, Yuandao tablet firmware**, Kubi Rubik's Cube tablet firmware**, Zhiqi tablet firmware**, five-element tablet firmware**, Newman tablet firmware**, Orn tablet firmware**, Punell tablet firmware**, Pinpoint tablet firmware**, tablet box forum firmware**.

2. Flash the tablet according to the tutorial in the firmware package.

In general, the firmware package of ** is a compressed file, which is decompressed first; There should be several files or folders in it after unzipping,It contains a word document of the flashing tutorial,Follow the flashing tutorial to do,If not,Then look for the flashing tutorial on the official website。 (Be sure to follow the official upgrade tutorial, the method is different for different tablets.) )

3. The flashing method of each tablet may be different, and it cannot be explained uniformly here, please follow the official tutorial for specific steps.

With the popularization of mobile Internet, tablets have become one of the indispensable tools in people's daily life. However, some users find that the system is slow or have other issues when using the tablet, and this is when they need to flash the device.

The so-called flashing is to replace the original system of the tablet with a new system. Flashing can solve some problems such as slow system operation, stuttering, and failure to upgrade, and can also allow users to experience a smoother and more personalized operation interface.

The specific steps for flashing the machine are as follows:

1.Back up your data. Before flashing, you need to back up the important data in your tablet to your computer or other storage devices to avoid data loss during the flashing process.

4.Enter flash mode. Different tablets may enter flash mode in different ways, and you generally need to press and hold the corresponding key combination, such as "Volume +" and "Power" keys at the same time.

5.Flash. After entering the flash mode, select the flash package and start flashing. You need to wait patiently during the flashing process, and do not cut off the power or force the shutdown halfway.

6.Restart your tablet. After flashing, restart the tablet to enter the new system interface.

It should be noted that flashing the computer has certain risks, and if it is not operated properly, it may cause the tablet to not work properly. Therefore, it is necessary to read the relevant tutorials carefully and understand the risks and precautions of the chain before flashing.

By flashing the phone, basically all the problems encountered by the tablet can be solved. For example, you can't turn on the phone, you can't enter the system, you can't get into the system, you forget to unlock the password, you are slow to respond, and so on. So what does the tablet flashing tutorial look like?

Let's take a look.

Introduction to how to flash a tablet

2. According to the tutorial in the firmware package to flash the tablet, under normal circumstances, the firmware package is a compressed file. First of all, decompress it, and then follow the flashing tutorial inside.

3. Click on the one-click flash, click on the browse, open the file directory, and find the firmware just now. Click Flash Now to start flashing, as long as the operation steps are correct, your tablet will be successfully flashed in a while.

4. In the process of flashing the tablet, remember not to unplug and unplug the data cable, and at the same time, before flashing the tablet, make sure that the power of the computer is kept at more than 50% to avoid the tablet computer from automatically shutting down during the flashing process, which will lead to the failure of flashing.

Steps to flash your tablet

1. One principle is that before you flash the machine, you must make sure that your tablet has enough power and will not suddenly shut down automatically during the flashing process, because once the automatic shutdown is very likely to make the tablet become a brick.

2. When copying the package to the SD card, it is best to stop what you are doing to avoid the loss of data in the package file, resulting in inexplicable bugs in the system after flashing.

3. Before each flash, it is best to do a full wipe, that is, formatting, to avoid incomplete flashing. It's best to do another backup to avoid unnecessary losses if you still need your previous data or because of your mistakes.

4. It is best to prepare a blank SD card for flashing, because if you use an SD card with other data to flash the computer, you may lose data in the morning or fail to flash.