What should I do if the mobile phone signal is always bad?

If you are using a Huawei phone and the number of signal bars in the status bar of your phone is high or low, we recommend that you take the following steps to solve the problem:

1.Whether a magnetic case, metal case, magnetic stand, or magnetic chuck cup is used.

If your phone uses a metal case, magnetic case, magnetic bracket or magnetic chuck, it is recommended to remove it and try it, as metal and magnetic materials can easily interfere with the signal and cause the phone signal to deteriorate.

2.Change your current location.

1) In some closed indoor environments, such as houses with dense spacing between buildings, the mobile phone signal may be blocked, resulting in poor signal. You can go outside to test if the mobile phone signal can return to normal.

2) The degree of network coverage of operators varies according to different regions, and urban areas basically meet the coverage, but some remote areas may have insufficient coverage capacity, which will lead to poor mobile phone signal. You can determine whether it is caused by network coverage problems by whether the mobile phone signal is poor when you are only in the same area or the mobile phone signal status of nearby friends using the same carrier** card.

3.Check that the APN settings are correct.

Incorrect APN settings will affect the normal use of the network.

2) Click the APN name to enter the APN setting interface.

3) Open the three dots in the top right corner and tap Reset to default.

4.Clean the SIM card, cross-swap card attempt.

1) Please take out the ** card to observe whether the metal surface is dirty or oxidized, it is recommended to keep the ** card clean and try it.

2) It is recommended to change to another SIM card of the same carrier, or change the SIM card to another mobile phone that supports this card before viewing. If the signal icons are all displayed as no signal, it is recommended to go to the operator's office to check and replace the SIM card with a new one.

5.Reset network settings.

If the problem persists, we recommend going to Settings, searching for Restore Network Settings, and clicking Reset Network Settings. This operation will delete Wi-Fi and Bluetooth related records, so please operate with caution.

If the problem persists after trying the above methods, we recommend that you back up your data in advance (WeChat QQ and other apps must be backed up separately) and bring the relevant purchase voucher to a nearby Huawei customer service center for testing.

If the mobile phone signal is always bad, there are two reasons, one is that the mobile operator you choose, his signal is not good, and the second is that your ** card has been aged.

Check the Signal Strength If the signal is not good, it may be a problem with the carrier.

Sometimes the signal is very bad when we hit **, which is a very annoying thing, so what should we do if the mobile phone signal is not good?

First open your phone's settings, click General, pull down to find Restore, enter a series of restore options will appear, and choose to restore network settings.

Then exit the settings page again, find the airplane mode on, wait for five seconds, and then turn off the airplane mode, so that the signal is restored.

The key is to determine whether it is a problem with your mobile phone or your local carrier's network signal. If it's the former, it's good to change your phone; If it's the latter, you can only find the operator to which your mobile phone number belongs.

I hope mine can help you, hope, thank you.

1. Choose a high ground to use your mobile phone.

In more remote places, the mobile phone on the first floor may often be in a state of no signal, but after the mobile phone is brought to the second floor to use, the mobile phone signal is basically three or four bars, and it is relatively stable. Therefore, when the signal is not good in the place, you may wish to go to a higher position and use it in a place where the window is biased, which can basically solve the problem of poor mobile phone signal.

2. You can change to different mobile phone network operators.

There are three major network operators in China, namely China Mobile, China Unicom and China Telecom. These three network signals exist at the same time, when you use the mobile network, the signal is not good, you may wish to try to use Telecom or Unicom card, many times can solve the problem of poor mobile phone signal.

3. Mobile phone signal amplifier to enhance mobile phone signal.

At present, a device called mobile phone signal amplifier is popular among users in remote villages, basements, and families or communities with poor mobile phone signal. A cell phone signal amplifier can amplify the cell phone signal around us, which can improve the quality of the network. It is very practical for users in some of the lower residential areas, basements.

4. Contact the operator to solve the problem.

This method is more complicated, and operators mainly implement signal coverage by suggesting base stations, but the suggestion cycle is very long, and it requires the opinions of all parties to be coordinated, and the construction cost is large. Some users even feel that adding base stations will affect their health, and refuse to be built by operators, and the signal coverage work has been far away. It's all about it.