Wrangler, what s the problem with the gas pedal not running and then the engine is about to go out?

Engine failure, the reason may be that a fuel injector is blocked, it doesn't matter when the speed is low, when the throttle is large and the speed is high, the oil sprayed out is not enough, the pressure generated by combustion is not enough, and the work done is not enough.

1. Poor fuel quality.

2. The oil circuit is blocked and the oil supply is insufficient.

3. There is no oil.

4. The oil pump is faulty and needs to be replaced.

5. Serious carbon deposition.

Please go to a professional repair shop for inspection and repair!

Hope it helps, hopefully!!

The reasons for the lack of power of the car are: poor oil circuit, the gap between the brake pad and the brake disc is too small, the oil is not good, the throttle is dirty, and the tire pressure is too low.

First of all, in a big way, the lack of power of the car is divided into insufficient engine power and insufficient transmission output power (referring to automatic transmission). Underpower in the engine is the most common and has three aspects:

1. There is no good mixture, the main reasons are insufficient pressure of the gasoline pump, blockage of the gasoline filter, blockage of the injector or hairpin, too dirty air filter, blockage of the exhaust pipe or three-way catalytic converter, engine control system and so on;

2. There is no good and accurate ignition, the main reasons are spark plugs, igniters, ignition timing and other engine control systems;

3. There is not enough cylinder pressure, which is a mechanical failure.

About the maintenance of the car:

1. Visual inspection. Before leaving the car, look around the car to see if the lighting device is damaged, whether the body is tilted, whether there is oil leakage, water leakage and other leaks; Check the appearance of the tires; Inspect the condition of the doors, engine compartment covers, row compartment covers, and glass.

2. Signal device inspection. Turn on the ignition switch key (do not start the engine), check the lighting of each alarm light and indicator light, start the engine to check whether the alarm light is out normally, and whether the indicator light is still on.

3. Fuel inspection. Check the indication of the fuel gauge and refill the fuel...

Faulty spark plugs.

The Wrangler is a Chrysler Jeep car model, and the Wrangler is the pinnacle version of the Chrysler Jeep Wrangler series. The Wrangler is the toughest breed in the Jeep range, a true ORV off-road vehicle.

The Rubicon Trail is a trail in the northern part of the Sieera Nevada Mountains in California, USA, with countless huge rocks and long and steep staircase slopes on this "road" of less than 100 kilometers, bringing together almost every difficult off-road obstacle in the world. Chrysler's use of RUBICON as the name of Wrangler's top sub-series naturally raises the image of Wrangler to a new level in people's minds.

It was first shown at the 2002 North American International Auto Show in Detroit and was sold only in North America and Latin America.

The Wrangler Rubicon features an off-road performance manifold, which adds a lot of off-road performance that can only be found in high-performance modified cars with parts purchased from the original parts market. Chi Chun.

The 2007 Wrangler is equipped with a liter V6 engine with a maximum output of 202hp and a maximum output torque of 320Nm, and the fuel consumption of the new Wrangler is liters for 100 kilometers of city and 100 kilometers of highway fuel consumption for the six-speed manual transmission version, and the fuel consumption of the four-speed automatic transmission version of Xindansui is liters and liters for 100 kilometers of city and highway respectively. It is complemented by a Dana 44 front and rear axles with a greater load capacity.

Hello, the reasons for the failure are:

1. Check that the battery has a 12-volt voltage, if the battery is not enough to take the battery, find a car to take the battery, and replace the Tanlu battery after starting.

2. If the oil pump is depressurized, or the gasoline filter is too dirty and blocked, check whether the fuel pressure is normal, and replace the oil pump if it is abnormal.

3. The starting motor is broken, so that the carbon brush is less conductive and cannot be started.

4. The crankshaft position sensor has too much carbon deposit, or the honest person is broken, and the ignition and fuel injection signal are not normal (you can clean the crankshaft position sensor sludge to see if it is normal).

5. Ignition coil, throttle failure will also cause occasional failure to start properly. There are many causes of electrical failures, it is recommended that you go to the repair shop to read the fault code with a computer diagnostic instrument, I hope it will help you.

Check if the battery voltage is insufficient.

Dear, hello, the reason why the car suddenly does not catch fire and the solution 1, the car battery is not enough or the fuel is insufficient, this is the easiest item to check, and it is also the most likely to cause the car not to catch fire. It's easy to judge the amount of oil, but how to tell if the battery is running low? The ignition key goes to the ON gear, one key to start the model, press the start button twice without stepping on the brakes, turn on the headlights, and the lights obviously change from strong to weak or simply not bright.

Then press the horn, the sound of the horn is obviously weaker than usual, or the answer is not loud, then it can be judged that the battery is insufficient. Once these two situations occur, then you can choose to seek help from surrounding car owners first according to your own conditions, and apply for emergency measures such as taking electricity, borrowing fuel, and trailers. 2. The steering wheel can not be started when it is locked, which is an ordinary anti-theft function that many cars have, after pulling out the car key, the steering wheel is not back to the right or has to rotate, it will cause the steering wheel to start the self-locking function, the steering lock pin and the steering column are buckled together, the steering wheel can not move, and it can not catch fire.

The solution is very simple, that is, to twist the key while shaking the steering wheel, otherwise it is impossible to twist the key even if it is broken. 3. Check the gear of the car, under normal circumstances, P gear or N gear is the correct gear when the automatic transmission car starts. If the owner is careless and puts the gear in R gear or other gears, the result will not only be unable to ignite, but also cause potential safety hazards.

The workaround is to adjust the correct gear and try to start the car. If the above conditions are checked and ruled out, but the vehicle still does not ignite, then we judge by these two performances: one is that the starter can be heard to rotate, but the engine can not start.

The other is that after twisting the key, there is no sound at all. You can hear the sound of the starter turning, but there are many factors that cause the car to not catch fire due to the engine not starting, which may be caused by one of the many cracked orange barriers. If the circuit or electronic fault is caused by this reason, then there must be no warning before the car does not catch fire, and it is very sudden.

Circuit failure: fuse blowing, high-voltage coil breaking, low-voltage circuit breaking, center ignition wire falling off, splitter head leakage, spark plug damage. Electronic failure mainly refers to the loss of function of the computer control board.

There aren't many Wrangler diesel breakdowns. The failure of the diesel version is particularly few, it can be said that there are fewer failures than the gasoline version, and the diesel is more prominent in terms of power, from the economic aspect, the diesel is also more economical, and the climbing ability is stronger than that of gasoline, but the diesel must be used in a regular gas station, otherwise the oil pump is easy to break, and the diesel car is difficult to start, you can check each pipeline to see if the joints are not strict, and at the same time tighten the leaking part and discharge the air in the pipeline in time.

Wrangler's messageTop off-road ability, hard-core design style, rich personality infiltration of prudent customization and after-market, no doors and roofs, close to nature, power taking into account fuel economy, ultra-high value retention, top off-road ability, hard-core design style, rich Cong Jing's personalized customization and after-market.

The Wrangler has a non-load-bearing body.

The front and rear axles are 5-link integral axle structure, and on the third generation model, the Wrangler's girder uses up to 8 beams to improve bending resistance, and the number of beams in the field of civilian off-road base destroyers has been called the peak.

Summary. Hello, glad to answer for you, yes, please wait a moment.

Hello, glad to answer for you, yes, please wait a moment.

Hello, the reasons why you can't refuel are generally as follows: 1. The fuel system is clogged, such as nozzles, gasoline filters or fuel wide buried oil quality 2, and the intake system is blocked, such as air filters and air flow meters. 3. The ignition system works poorly, such as spark plugs and high-voltage lines.

4. The gas distribution phase is incorrect, such as the intake and exhaust valves are not tightly sealed.

What is the situation when the Wrangler is powerless to accelerate? What is the situation when the Wrangler is powerless to accelerate? Explain that there is a problem with the throttle or throttle sensor of the car, and the specific reason should be checked by a professional at the repair shop or 4S shop.

The specific introduction is as follows: 1. Throttle failure: When the throttle fails, the vehicle will show symptoms such as engine shaking, unstable idling, weak refueling, and difficulty in starting the cold car.

In this case, the throttle should be cleaned again, especially the sludge removal letter attached to the throttle. If the throttle is structurally damaged, it should be replaced. 2. Throttle sensor problem:

When the accelerator pedal fails, the vehicle will show problems such as weak acceleration, serious frustration, and failure to run the fuel. In this case, the throttle sensor should be checked, and the daily attention should be paid to adding as much high-quality fuel as possible. After the car is repaired, the fault code should be cleared in time, otherwise it will cause the memory disorder of the vehicle's electronic system and bring some unnecessary trouble to the later stage.

If the Zen slag fruit has just been maintained to see if the oil has been added too much, it is possible to add fuel of poor quality, or the oil circuit has not been clean for a long time, resulting in poor combustion, add two general cleaning agents, clean the fuel injector of the lower oil circuit, and run to see the effect @2019

This situation occurs because the idle control valve of the throttle valve is damaged, and the throttle valve needs to be replaced after this situation, the throttle valve is an important part of the engine, without this part, the engine is not able to operate normally.

After the driver presses the accelerator pedal, the throttle opens wider, and the amount of air entering the engine increases. When the sensor detects an increase in the amount of air entering the engine, it feeds a signal back to the ECU, which is processed and controls the fuel injection system to increase the amount of fuel injected so that the engine can rpm higher.

When the engine is in idle condition, there is an idle control valve on the throttle valve to keep the throttle open, so that a small amount of air can enter the engine to participate in combustion.

If the idle control valve is damaged, the throttle will not be opened, if you do not step on the accelerator, the throttle will be closed, and the air will not be able to enter the engine to participate in combustion, so the engine will stall.

When replacing the throttle, be sure to choose original parts, the reliability and durability of original parts are better. And when you usually use the car, you must maintain it regularly. Daily maintenance is very important for the car, and regular maintenance can keep the car in good condition.

Photo by Pacific Automobile Network Jing Chenchen).

Generally, it is caused by dirty blockage of the air filter or small dirty opening of the throttle.

In this case, the lack of air volume causes the combustible mixture to burn inadequately, the engine power decreases, the light is black smoke, and the heavy is directly turned off.

Correct manipulation of the accelerator pedal:

The operation of the accelerator pedal should be based on the right heel on the cab floor as a fulcrum, the sole of the foot lightly on the accelerator pedal, with the ankle joint extension and flexion action, step down or relax, when stepping on the accelerator pedal, the force should be soft, so that the light pedal is lifted slowly.

When starting the engine, do not step on the accelerator pedal to the end, slightly higher than the idle throttle as well, when starting, refueling should be slightly before the clutch linkage point as appropriate, the throttle opening is better to take a small and medium degree, and the relaxed clutch regret dust should be closely coordinated with the accelerator, and the action is agile. High good.

Summary. If the engine has oil and fire, but it can't catch fire, then it is definitely necessary to see whether your engine cylinder pressure is normal, this may be your engine cylinder pressure is insufficient, and at the same time, you should also check whether your engine mixture is normal, for example, too much fuel injection or too little injection will also cause the car not to catch fire, you have to see if your spark plug is now wet on the surface.

Hello, don't worry, I can ask for your question, but wait a minute, I need text for about 2 minutes.

If the engine is clear and there is oil and fire, but it can't catch fire, then it is definitely necessary to see if your engine cylinder pressure is normal, this may be your engine cylinder pressure is insufficient, and at the same time, you should also check whether your engine's mixture is normal, for example, too much fuel injection or too little injection will also cause the car not to catch fire, you have to see if your spark plug is now wet on the surface.

The spark plug is wet.

If you're sure that the ignition is okay now, you can test the cylinder pressure again.

The car has been parked for a month, and now there is oil, fire, and cylinder pressure.

So you use a computer to read what is the fuel correction factor?

Is there no glitch now **?

Yes, there is no fault in the engine.

Is there no sign of fire at all now?

Something to be asked for.

Then you step on the gas pedal and try it.

Is this wet stuff engine oil or gasoline? Or antifreeze.

If I can help you, please give me a thumbs up Thank you!