How to repair a car without spraying glass water?

This is obviously caused by the clogged nozzle.

Because you may not usually add glass water, but add that kind of tap water, so the impurities in it block the nozzle.

It is recommended that you take a toothpick to clean up the garbage from the sprinkler head, as long as you clean up all the garbage, then you can naturally spray water.

If you are sure that the glass of water is still there and can't be sprayed, then the pipe must be blocked, then you can go to the 4S store to find them to deal with it for you

If the car glass water is already "close" to nothing! Of course it can't be squirted! Add a glass of water and you're done!

Check it out directly with a 4S shop or repair shop, after all, others eat this bowl of rice.

There are many reasons for this, and it is advisable to go to a repair shop.

Check to see if there is any water first, then check the spout, and if it is blocked, find something sharp and poke it; Then look at the hood to see if the hose is pressed down and put it back in place.

Hello, common causes (1) leakage of glass water supply pipe, in the case of the sound of the water pump and the glass water is still sufficient, you need to open the engine cover to check whether the water supply pipe is leaking.

2) Pipeline blockage If you are accustomed to using tap water, the most important thing is car wiper water, because the tap water itself contains a lot of impurities, so it will precipitate after a long time, resulting in the blockage of the pipeline.

The nozzle is blocked by dust, and you only need to find a thin needle to dig out the nozzle hole;

Tear it down and take a look. It should be that the pipeline ** is blocked.

Maybe the fuse is choking? All things are prepared for those who are prepared....For example, if you have long changed to antifreeze glass water, you will not be able to say this.

1. If there is a lack of glass water, you need to check the water tank, whether it is used up or lower than the minimum scale mark, it should be replenished as soon as possible. However, it should be noted that it must not exceed the maximum tick mark (max), otherwise it will easily overflow when the car is driving.

2. The pump burns out, press the wiper switch to check, if the pump does not have the sound of working, it means that the pump is indeed burned, and it should be treated in a special maintenance shop for the first spring.

3. If the glass water supply pipe is leaking, when the pump has a sound and the glass water is still sufficient, it is necessary to open the engine cover to check whether the water supply pipe is leaking.

4. The pipeline is blocked, if the habitual use of tap water as car wiper water, because the tap water itself contains a lot of impurities, it will produce precipitation after a long time, resulting in the blockage of the pipeline.