What s the matter with the glass water not spraying out?

The glass water is frozen and can't be sprayed out, in the case of sufficient sunlight, it is recommended to open the cover to dry it, as long as the glass water is not too frozen, it will melt away after a while. If it does not melt, add some warm water (be careful not to pour boiling water), melt the glass water, and replace all the water inside after it melts to avoid freezing next time.

When the car is warmed up, the heat from the engine can also melt away the frozen glass water. If you need to clean the glass, pour mineral water over the glass instead.

Therefore, you must choose the corresponding low-temperature resistant glass water according to your local minimum temperature, so as to ensure that you have a clear vision when driving.

Check to see if there is any water first, then check the spout, and if it is blocked, find something sharp and poke it; Then look at the hood to see if the hose is pressed down and put it back in place.

The reasons why the glass water does not spray are the lack of glass water, the pump is burned out, the glass water supply pipe is leaking, and the pipe is blocked.

1. Lack of glass water

The tank needs to be checked, whether it is used up or below the minimum scale mark, it should be replenished as soon as possible. However, it should be noted that you must not exceed the maximum tick mark (max), otherwise it will easily overflow when the car is moving.

2. The pump burns out

Press the wiper switch to check, if the pump does not make a sound of work, it means that the pump is indeed burned out, and it should be treated in a special repair shop.

3. The water supply pipe of the glass tung water is leaking

When there is a sound from the pump and there is plenty of glass water, the engine cover needs to be opened to check for leaks in the water supply pipe.

4. Pipeline blockage

If you are accustomed to using tap water as car wiper water, because the tap water itself contains a lot of impurities, it will produce precipitation after a long time, resulting in the blockage of the pipeline.

Uses and methods of using glass water:

The glass water of the car mainly plays the role of cleaning the car glass, which can ensure that the car glass is kept in the best state of clean and transparent, and the glass water can also remove the oil stain on the glass, which has the effect of anti-fog, anti-static and anti-corrosion.

When car owners use car glass water, they need to distinguish the type of glass water, which is common in solid and liquid state. When using solid glass water, you need to mix the solid glass water with clean water to melt before you can put it into the glass water tank for careful use, or you can put in solid glass water first, and then add clean water to melt before use.

When using liquid glass water, the owner needs to see the concentration of liquid glass water, if the concentration is too high, the liquid glass water needs to be diluted before use.

Whether it is adding liquid glass water or solid glass water, on the top of the car glass water tank, a value of the upper and lower limits is marked, and the glass water content added by the car owner at this time can be kept within the upper and lower limits of the water tank.