How to maintain mahogany mainly red sandalwood bracelets

1.To maintain the shine, try to avoid getting into water. More plates, more twists, more plays, will be smoother and smoother, the color will be darker and darker, and the more beautiful.

When the red sandalwood is new to the plate, it will have its natural chlorophyllin disk, and the disk will be gone for a few days, and the color will be darker and deeper, and it will be loved by the majority of friends.

2.When we wear it, we should be careful not to let it come into contact with any chemical liquids and colored liquids to prevent corrosion or colored immersion in it, which will affect its wood material.

3.Rosewood and other cultural toys, carrying Chinese civilization, also represent themselves, most of my collection comes from anthurium? Cabinet, he understands treasures, is a gem and jade appraiser, treats people kindly, has a lot of red sandalwood, can learn from him.

He said: NBNb200 communicate and learn from him more to make himself more educated.

1. Mahogany bracelet Buddha beads are recommended to be bagged for preservation. After the usual play, it is recommended to store it in a transparent ziplock bag. All wooden bracelets, whether they are huanghuali or small-leaf rosewood Buddha bead bracelets, are as hungry as water and oil, and we try to avoid them in the process of playing.

In the summer of the Southern Doulimb Bureau, in the event of a typhoon or the rainy season, the air humidity is huge, and the mahogany bracelet beads are easy to absorb the moisture in the air, and in case of dry summer changes, it is easy to make the mahogany bracelet beads crack. This is also empty is placed in the ziplock bag of the bracelet beads will have water mist, which is a normal phenomenon, the ziplock bag can basically maintain the moisture balance in the mahogany bracelet beads.

2. Gloves are required to play mahogany bracelet beads. The most perfect way to string Buddhist beads is by hand. In the hot summer, many people's palms are easy to sweat, so you must not use sweaty hands to plate mahogany hand beads, it is recommended to use ceremonial white gloves, and it is silky, do not use cotton, let alone use a bath towel.

1. Small leaf red sandalwood, sea yellow, and more yellow bracelets are not easy to deform and crack due to their delicate wood and high oil content. You don't need to put any oil on the plate.

2. Rub the surface of the beads vigorously with a bath towel. The effect is actually to clean the surface of the beads from the adhesive layer and dirty color and perform fine polishing, 2-3 days, about 2-3 hours a day.

3. Rubbing a soft cotton cloth for a week is also considered polishing. If it is a mahogany bracelet with red sandalwood, it is normal for the soft cloth to have red marks on the surface, and the color will fade after a week.

4. Leave naturally in a cool place for a week. Allow the beads to dry naturally, while the surface is evenly in contact with the air to form a fine and uniform oxide protective layer.

5. Start the handpan. At this time, the hands must have just been washed and have been dried, sweaty hands please do not directly plate, it is best to wear abrasive cloth gloves, dry hands and slightly sweaty hands can be directly plated. Note that the beads must be coiled around the orifice.

You can plate for about 30 minutes a day, and after a week to two weeks, you can feel a slight stickiness when drying the beads, but in fact, the beads have formed a thin layer of pulp.

6. Let it be left for a period of time before natural drying. Let the slurry harden to a certain extent, usually about a week.

7. Repeat the handpan process 5-6 times, that is, 3 months, you will see that your beads are very aura luster. Well-coiled beads sometimes exhibit strong reflections, somewhat like a vitreous luster.

8. Special attention should be paid to the fact that mahogany beads should not be exposed to large moisture at any time. If the beads are dirty, you can wipe them a few times with a slightly damp cotton cloth, and then leave them for a while before playing with them.

When discing, try to coil all areas of the beads, especially the orifice. Summer is the high incidence of the problem of fading of new wooden beads, sweaty hands are not suitable for wearing wooden beads for a long time in summer, you can wear them for two days and then let them dry in the shade for two days.

Sandalwood bracelet is definitely a variety of bracelets with a high play rate, no matter which variety of sandalwood, it is particularly good-looking on the hand, and sandalwood also has certain benefits for the body, so, how do we maintain it when we wear it?

How to maintain sandalwood bracelets.

1. Do not oil, keep the wood dry, try not to touch the water, and wipe it dry as soon as possible. It is important to finish the plate in the early stage to make the beads brighter and reduce the effect of water in the later stage.

2. It is not advisable to soak in water too much and avoid being too dry, so as not to lose the aroma. Including the sweat on your hands, after all, sandalwood is still wood, and you can dry it quickly after being wet.

3. When not worn, wipe some olive oil and place it in a more sealed box. Try to avoid direct sunlight, ultraviolet rays will accelerate the decomposition of sandalwoodol, so that sandalwood loses its fragrance.

Fourth, sandalwood beads can not touch water, if you accidentally encounter water, you should wipe it dry with a cloth in time. Do not get on with all kinds of chemical detergents, pesticides, perfumes, etc.

5. If we always carry sandalwood beads on our hands, we don't need to anoint them. If you don't want to bring it, put it in a box with olive oil and put it in an air-dry place.

Sandalwood bracelet maintenance taboo.

1. The wearing of sandalwood ornaments should not be in contact with oil, wax, solvent, acid, alkaline and chemicals.

2. Wear it in summer and avoid frequent contact with sweat.

3. Although sandalwood continues to diffuse the fragrance of sandalwood, the properties of wood also make it absorb the odor of the environment. Therefore, when we wear or store it, we should prevent and avoid the erosion of other odors.

4. Do not rub with your hands frequently. The grease of sandalwood will mix with dust and other dust in the air to seal the pipe holes of sandalwood, thus forming a pulp with mahogany properties. Although the pulp generated on the surface of sandalwood can maintain the brightness and beauty of sandalwood products, and slow down the influence of sandalwood by environmental dryness and humidity, the fact does affect its fragrance.

How to clean sandalwood bracelets.

1. When cleaning sandalwood bracelets, you can use a soft brush to gently remove dust, and do not use detergents or other chemical cleaning agents.

2. If the slurry hinders the fragrance from emanating, you can wrap the bracelet with a hot towel that wrung out the water, and wipe off the slurry layer on the surface with a cotton cloth after a hot compress for a period of time.

Sandalwood bracelet buying skills.

When choosing a piece of red sandalwood, the most important thing is oily. Good oiliness will make the red sandalwood object easier to pulp, and the oiliness is sufficient, which will also make the red sandalwood more ornamental, for example, the treasure is shining. Good oiliness is equivalent to a good texture, and the oily red sandalwood is like a baby's **.

A good utensil is nothing more than fun, good-looking, and easy to use.

The texture of red sandalwood is still relatively complex, with flame patterns formed by black tendons and panda eyes formed by black lines. Scars, shadows, etc. formed by wood lesions. As for the texture, we will introduce it in detail later.

As for the choice of texture, it is not important, because after a long period of oxidation, the red sandalwood will eventually become deeper, and the texture will not be obvious.

1. Mahogany bracelets, do not touch the water, because the water will bring a lot of changes. Humidity changes, temperature changes, etc. will cause the beads to crack, because the physical laws of thermal expansion and contraction also apply to wood, when the bracelet touches the water and enters the inside of the bracelet, the wood will expand or shrink due to temperature changes will cause cracking.

2. If you accidentally drop the bracelet into the water, wipe the bracelet dry with a cotton cloth, and then put it in a sealed bag to dry naturally, avoiding placing it in a place with high temperature and humidity, so that after natural drying, there is basically no impact on the follow-up play of the bracelet.

3. When wearing the bracelet daily, you may encounter sweating, which also has a great impact on the bracelet. In this case, use cotton gloves or cotton cloth to wrap it up after wearing, because the cotton cloth has a sweat-absorbing function, which can ensure that the bracelet will not crack or be corroded by sweat.

4. If you accidentally fall on the ground or touch **, it will cause surface deformation or flaws, so you must pay great attention and try to handle it gently. Otherwise, if it is broken, it will be troublesome to repair it again.