Is there a handprint on the lens of the Ricoh GRD iii?

Let me tell you this, someone once called Canon to ask the technician about the coating of the SLR lens, and the technician's answer was: After so many years of technology accumulation and innovation, the coating technology has been very perfect, and there will be no scratches due to one or two wipes, even if you wipe it directly with cotton clothes.

There's no psychological burden, I use the cheapest cleaning pen to wipe thousands of lenses, but pay attention when wiping, don't have large dust particles, hard particles can directly scratch the lenses, let alone coating, and then wipe from the middle to start wiping in circles.

If you want to talk about the impact, it is not too big, but if you shoot against the backlight or the lighting situation is complicated, it will produce glare.

Originally, I just came to see it, but I really don't say that I can't say it, there is something very wrong upstairs.

The first step in cleaning the lens normally must be to use an air blow to remove the dust and particles on the lens to pave the way for the next step of cleaning. Don't blow with ha, this is not cleaning the glass at home.

The second step, building on the foundation of the first step, is to buy a disposable lens paper, which is very cheap. However, the kilowatt should not be used with lens cloth and glasses cloth, because dust will be hidden in the knitwear, and the lens may be scratched when wiped. A lot of people make such mistakes.

The lens paper is disposable, the fabric does not hide dust, and it is thrown away after one use, and the lens cloth will not be thrown away at one time, and it will also be dusted when stored.

If you are conservative, cut the lens paper into a broom, scan the lens, and if you can't remove it, use a new piece of paper to erase it.

Step 3: If it doesn't work, buy a lens cleaning solution and wipe it with lens paper.

If you have a lens pen, you must follow the instructions of the pen, and I personally feel that the pen will also hide dust, so I generally don't use it.

Oh, by the way, rub it in a circle from the center to the outer circle, be light. If the iding lens is scratched, there must be dust and particles, so it must be blown clean first.

Is it necessary to cherish the lens like this, I just dismantled a lens, it's not cheap, when I dismantle it, I put my hand on the glass to make a good effort, and now the glass is very strong, I don't believe you hit the glass on the edge of the table a few times, and the print is not left, I have practiced it for you, I'm afraid you won't dare to practice it, hahahaha.

Ricoh GRD3, good machine, there is a handprint on the lens, no matter what, you feel uncomfortable, right? You just use a lens cloth, or a cloth to wipe your eyes, take a breath, and then rotate and wipe it, and it doesn't affect the coating at all, and the lens cloth is used for this kind of thing.

The Lenspen Mini Pro II is good, you should buy one that doesn't hurt, plug it in lightly to make sure there is no mark, and blow it a few more times with a blow ball. Pay attention to keep it clean after cleaning, maintenance is very important, but it should be removed if it is dirty. After a long time, the grease will be more troublesome, and if there is a problem, it will be solved quickly

Actually, it's fine. Don't worry so much. If you look at the phone's camera, there are scratches, can't you see it?

I don't have a lens pen, I'm lens paper plus cleaning solution.

Wipe directly with lens paper!!

Hands secrete organic matter, alcohol washing may destroy the layer on your lenses, wipe it with a cloth that is specially used to wash the lens.

Wipe it with a cotton swab and it's gone.

There's nothing to do, so you don't have to go out of your way to get it.

If there is too much lens dust, just buy a lens pen with a small head to wipe it; A little dust does not affect the imaging, one of my single-lens reflex lenses The glass piece is ** knocked into a small pit by a nail, and there is no effect in the picture;

For maintenance, be careful not to get wet; It also can't be too dry. In general, 40% relative humidity is optimal.

Dust on the surface of the lens can be wiped off. The maintenance of the camera is mainly to prevent bumps and not to be exposed to moisture, if you return to the warm room after using it outdoors in the cold, do not rush to turn it on, let it sit for a period of time and wait for the camera to be close to the indoor temperature before turning it on.

I used to think it was necessary. But I have been using it for a year without a general, and in fact, I am used to it now. If you don't care about money, you can get one. Unworthy words. It's okay to get used to it.

Not necessarily... DC is to have the usage of DC.

Personally, I don't think it's necessary.

The GRD itself is designed to be a portable camera.

Personally, I'm not very much in favor of buying a bunch of accessories for a portable camera, which are basically asleep after use.

There's no need to spend money in vain.

Every time the SLR is carried out, it feels very heavy, it is troublesome to take it out, and the usage rate is low. It's nowhere near as easy as cards come by. And now the image quality of several flagship products can basically meet my needs.

I chose it for a long time, and it was positioned on the Ricoh GRDIII. But I have used the GX200 before, and it is also a good camera, but the advantage of the GX200 is that it has a wide angle of 24mm and has a double light change. This GRDIII does not.

The disadvantage of 200 is that the focus is slow, and the graininess of the picture is very serious when the ISO is on 200, and it is basically impossible to see above 400. And the RAW format is almost useless, the purple edge is very serious. I don't know if there has been any change on the grdiii.

G11, LX3 and GRDIII which one should I choose, I hope the seniors who know how to answer it, I am grateful.

Big brother, you give me a picture!!

Ricoh GRD III

Because the ** you send is taken in the mirror, the left and right are reversed, so you can take a look at a few simple identification methods.

1. There is a protrusion on the upper part of the camera, about the width of your thumb.

2. The lower part of the lens is clearly composed of white letters.

3. The lower right corner is white, and the text is not clear.

4. The small gray dot next to the first joint of the middle finger.

If the left and right are interchanged, it must be the [Ricoh GRD III] camera, which is about the price.

Remember to click "Choose as satisfactory answer".

The original accessories are expensive When I bought a Canon card machine for 2,000 whole years, there were accessories: diving cover - it is a customized plastic shell, which sells for 2300, which is more expensive than a camera.

It's not a big problem to just wipe it, and the lens is not so tender. Besides, it's a mudra, so I guess you won't use too much force. So don't worry, just use your camera well.

However, in the future, Coco should pay attention to the fact that wiping the lens is a professional technique, generally speaking, it is first to blow with a balloon (to prevent the dust on it from abrading the coating when wiping), and then use suede to wipe. Moreover, the trajectory of wiping can not be wiped in the way of the center of the garden as a concentric garden, but should be wiped in the way of radiating the center of the garden. If there are stubborn stains, you need to take it to a professional agency that repairs the camera and scrub it with lens water.

Don't wipe the lens often, the general dust particles will not affect the imaging, and it will have no effect on the best effect. Try to blow as much as you can and rub less, no matter how professional scrubbing, it will always hurt you once.

The lens will not break, what will break is the coating on it, which is not cheaper than a lens, and cannot be wiped with organic reagents, it is best to use lens paper, glasses cloth is not good, and the grease on your hands should be removed as soon as possible.

I don't know what kind of machine you're talking about, whether it's a DSLR or a consumer digital camera, you can't touch anything with your hands, you can't wipe it with lens paper, that thing is sandpaper for the lens, and the lens cloth can't do it. It is recommended that you use a non-liquid lens pen, which is a professional optical equipment cleaning product, non-disposable, and can be bought for dozens of yuan!

Oh, I guess you won't make too much effort Once it's okay If it's dirty, it's best to wipe it with a special lens paper Or there is a blowing one If the lens is worn, just look at the group you shoot** Whether every one of the same places has an imprint.

Even rub it. The lens is generally fine. After all, lenses nowadays have multiple coatings. Generally, wiping it is not a big problem. Hehe, the landlord wants to open some.

And even if it's worn. As long as you don't shoot against the sun. The impact on image quality is also minimal.

Wipe the lens with professional lens paper or air blowing. Of course. High-grade suede rubbing lenses are also good.

Buy a lens pen, it's convenient and professional, or use an eye cloth to make it.

Generally, it will not wear out serious general scratches, which cannot be seen at all on the ** unless it is deep enough to be visible to the naked eye.

You can't see it now, it means it's not serious, maybe not, the current lens is not so fragile In the future, clean the camera with an air blower to blow off the larger dust, and then clean it with a lens paper rolled into a brush, if there are visible handprints, use Ha gas and deerskin to wipe !! Do not use organic solvents to clean, because the coating of the lens is the manufacturer's secret ingredient, and it may really dissolve in the cleaning agent, which is more terrible than scratching the lens

Canon's series of cameras is just this**,It's normal to not exceed 1,008,It may be slightly different because of the different cities**