The gate stainless steel has water embroidery with what to do

1. Use proper tools: When cleaning your stainless steel security door, be careful and use tools that are not abrasive. Neither the soft cloth nor the plastic wipe will damage the stainless steel surface. Of course, you can also use stainless steel cleaning balls, but they must be wiped according to the manufacturer's sanding mark.

2. Clean according to the direction of the grinding line: Some stainless steel security doors have grinding lines or textures on the surface. If there is a grinding line, it must be wiped in the same direction as the grinding line, and if the texture is not clear, then you have to be careful and wipe it with a soft cloth or plastic pad.

3. Use alkaline, chloride alkali or bleach-free detergents: Many traditional washes contain bleaching powder, and now the industry has begun to provide more bleach-free detergents. If they tell you that the detergent you use contains bleach, ask them if there are other options.

They may have bleach-free detergents to choose from. Of course, avoid detergents that contain chloride salts. This can cause small potholes or rust.

4. Purify your water: Although this is not practical, softening hard water does reduce a lot of sediment. Installing a filter can filter out these odorless and corrosive components.

Adding salt to a water softener can also help. If you are not sure about the method of purifying your water, you can call ** to consult a water treatment expert.

5. Rinse, rinse, rinse again: If you use a detergent containing bleach, you must rinse, rinse, rinse again, and wipe it off immediately. Especially if the suspended water contains the detergent, the sooner it dries, the better.

After wiping the stainless steel security door, it is natural to air dry, because oxygen can protect the blunt film of the stainless steel security door.

6. Ensure the cleanliness and hygiene of the stainless steel security door: according to the recommendations, use alkaline, chloride-containing alkaline, bleach-free detergent according to the recommendation, and clean it frequently to avoid hard attachments.

It can be touched by a layer of rust inhibitor.

1. The reason for rust: The material of the patterned stainless steel door used in your home is not real 304 stainless steel. Rather, it is stainless steel (stainless iron) with a steel grade of 202.

Under the erosion of acid rain, this 202 stainless steel (stainless iron) will rust, but it is much better than the door made of ordinary steel.

Second, the solution: use water sandpaper to polish off the rust on the rust point on the door, while the other parts of the door have not been rusted, first spray an alkyd anti-rust paint (gray or red can be), after the anti-rust paint is dry, and then spray a topcoat (you can spray your favorite color).

Hope it helps.

Rust removal water is used to remove rust, and sandpaper is used to polish the pattern.