If the USB flash drive cannot be formatted, how can I solve it?

Updated on number 2024-04-08
8 answers
  1. Anonymous users2024-02-07

    Open Control Panel, Administrative Tools, Computer Management, Storage, Disk Management, and the interface will appear.

    Right-click Disk 1, select Initialize Disk, and click OK. After the initialization is complete, the state of the USB flash drive changes to the Online state.

    Right-click on the white box on the right, select "New Disk Partition", enter the New Disk Partition Wizard, click Next, select the partition type (primary disk partition, extended disk partition, or logical drive), and generally select the primary disk partition.

    Next step - assign a drive letter (or not).

    Next - Select "Format this disk partition as set below" to set the format of the format (file system type, allocation unit size, volume label) (do not select Quick Format).

    Next - Successfully complete the Format Wizard. Click Finish and wait for its formatting to complete.

    After the formatting is completed, the status of the USB flash drive is displayed as "Good", that is, it is done.

    This repair method can generally restore the USB flash drive. However, this repair method also has a drawback, that is, it cannot recover the original data on the USB flash drive. If the original data on the USB flash drive is not very important, this method is more useful.

    If there are very important files on the USB flash drive that must be recovered, it is recommended to go to a professional company. Nowadays, there are basically professional companies that do data recovery in major cities.

  2. Anonymous users2024-02-06

    Check and repair it first with USB flash drive software If you can't repair it If it's not cost-effective or can't be repaired well, simply buy a new one, which is cheap and has a large capacity.

  3. Anonymous users2024-02-05

    See if there is a write protection switch on the USB flash drive, that is, there is a lock icon, just turn it on.

  4. Anonymous users2024-02-04

    Is it write-protected? If not, it's not broken.

    If the write protection is done, you can turn on the write protection button, and the other one is broken. But the possibility of bad is not very high, you can try to test the documents on the plate or get in, if you can take the test, it means that it is not bad. That's definitely the problem of writing protection.

  5. Anonymous users2024-02-03

    There's something running in the USB stick!

  6. Anonymous users2024-02-02

    What should I do if the USB flash drive cannot be formatted.

  7. Anonymous users2024-02-01

    It is estimated that your USB flash drive is poisoned, and it is recommended that you go to the next USB flash drive antivirus expert to kill the poison well, which can completely solve the write protection problem caused by the virus. You go to the official website and try it next.

  8. Anonymous users2024-01-31

    In your computer can not format this USB disk,It is recommended to choose to use other computers to try it,Or there is no way to format,That can only prove that this USB disk is broken,You can repair it to see if it can be repaired,You can only change a USB disk if you can't fix it,Install the formatted USB flash drive software on the computer,Follow the steps。

Related questions
2 answers2024-04-08

1. A U disk detection tool such as a chip wizard, decompress it, you can run it directly, and then click on the U disk on the displayed hardware information, and you can see the chip manufacturer or chip model of the card or U disk below. >>>More

7 answers2024-04-08

My USB flash drive model is the same as yours, and I have a capacity of 4G. Plugged into the computer, the display capacity and usable capacity are all 0 bytes, I thought the USB flash drive was retired. >>>More

7 answers2024-04-08

This is caused by improper operation of the USB flash drive, the original file system is corrupted, manifested as unable to open (a few can be opened, can see the files inside, but will show write protection, can not be operated), can not be formatted, as far as I know, can only be re-produced through mass production tools. It is recommended that you first use the software chipgenius to test what type of chip your USB flash drive is, and then go to the Internet** a corresponding mass production tool to reshape or low the level of mass production to achieve the factory setting, this will be more troublesome, but no way, I hope you can succeed! >>>More

8 answers2024-04-08

You can try it under Safe Mode.

FAT32 doesn't need to use this format. >>>More

5 answers2024-04-08

Copy on a computer that can use a USB stick.

The location is in. c:\windows\inf >>>More