Excuse me, I have a tuner and a stereo or something like that.10

The guitar and microphone go into the mixer, which goes without saying. Find the audio output of the mixer (Lotus port) and connect it to the MIC port of the computer. Just use your computer's recording software to record it.

It is also possible to record separately from the tracks. Don't get into the power output port of the mixer.

The recording studio is a very expensive project, if you have enough money, it's okay, not to mention that your mixer and sound may not meet the standards of the recording studio, let's talk about the price in short, this is the most important thing, hehe

Workplace: Don't know if you have enough space

Working environment: Be sure to stay away from noise, because MIC is very sensitive Working conditions: It costs 6 to 150,000 yuan just to decorate a house Equipment: The computer must be highly configured, depending on your choice

Microphone amplifiers range from a few thousand to 10 tens of thousands.

The audio interface also ranges from a few thousand to 10 tens of thousands.

And what kind of reverb, whatever, whatever, messy

Overall, it costs a lot of money

The most important point is how much money you are prepared to spend

The studio has 3 functions, recording, production, and mixing.

If you want to have all three, it's going to be more than 500,000 unless you're really rubbish.)

These three items alone cost about 250,000

It's a bit troublesome to say hehe, understand

Feel good, hope!

If it is a home stereo, turn down the volume of the mic.

If it's a computer speaker, turn down the volume of the MIC in the audio attribute. If the MIC volume bar is gray, reinstall the sound card driver.

If there is no multi-channel audio input volume adjustment in the recording software, you can only adjust the volume of each channel in the system's audio properties.

You should also write down your device connection plan.

Is it on a TV or a computer?

There are a few prerequisites for using a computer:

In terms of hardware, a microphone, a set of audio equipment and a sound card, the sound card is available on the computer.

The operation steps are as follows: plug in the microphone, enter the operating system, right-click the "volume" icon in the "taskbar" with the mouse and select to open the "volume control", and then select "Options Properties Recording Microphone (with a checkmark) OK". Then, in the "Volume Control" dialog box, remove the tick on the "mute" of the microphone, adjust the microphone volume to moderate, turn the "Volume Control" and "Waveform" flat roll balance sensitive space sliders to the far left, and close the dialog box when finished.

Have fun, huh

If you want to sing a cappella, you don't need it, otherwise you can get some accompaniment tape.

If you are not a professional, you can record with your mobile phone, if you want a professional mixer, there is a special recording interface, and you also have to buy professional recording equipment. So it's easiest to record with your phone.

See if you can touch the mixer, you can record from the mixer output, but you can't touch the mixer, and the recorded sound is not clear and meaningless.

Hello, Mr. Dongyuan is here, please wait for about five minutes, I am giving you the answer!

Hello, do you mean that you want to record the song The ** of the singing voice is an outdoor speaker, is it said that the user directly records the song outside the speaker.

Tips on outdoor recording.

The sound system should have a strong power reserve.

Choose a high-sensitivity MIC, which can enhance the sound transmission gain of the MIC, so that the auditorium can get enough loudness.

Also install a speaker, pay attention to protect the speaker cable, as well as the power cord.

Thanks, any questions can continue to ask me.

Questions. My stereo sings outside, and the sound recorded is very small. Don't know how to fix it?

Hello,The sound volume of this speaker can't be adjusted,To adjust the sound card driver,In the "Start--Control Panel" there is a small speaker called "Sound and Audio Equipment" double-click to open (if you have this icon in the lower right corner of the desktop,Right-click to open it). In the window that opens, select the Audio or Voice tab. When you see a "Volume" in the recording column, click Open.

Adjust the volume in the Recording Controls window.

In fact, if you want to ** what song or don't record it, go directly to the computer ** the song can be Oh! Or when recording, let him be closer to the sound source, so that the recorded sound is clearer.

Questions. I'm singing outside. The sound recorded is particularly quiet.

The sound recorded by Kuaishou outdoors is very small.

You can put the microphone closer, see if there is any setting recording on your stereo and then adjust the volume, I used to use my mobile phone to record with a small sound, and finally use headphones to get much better, you use a microphone for audio

In short, find your own device, look at the buttons, and adjust it.

Questions. Well, I'm pondering. Thank you.

Thank you and good luck.

Double-click on the speaker icon on the lower right side of your desktop to pop up the page, turn on the turned off microphone and the total volume, you can hear the sound, but you have to adjust the appropriate volume, too much louder than the microphone will give back the howling. Adjust its volume reasonably to hear the sound, or use professional recording software to turn on its monitor output to hear the sound.

Step 1: Turn on the Bluetooth speaker. The Bluetooth speaker of the speaker only needs to turn on the power switch of the speaker (other Bluetooth speakers need to broadcast the switch to the direction marked with the Bluetooth icon, until you hear two "beeps" or a voice prompt that the Bluetooth speaker has been turned on), and then the Bluetooth indicator light flashes, indicating that the Bluetooth has been turned on and has entered the searchable mode.

Step 2: Bluetooth search. Turn on the Bluetooth function of the phone, set it to "so visible" in the Bluetooth settings of the phone, and then click "Search" to find the Bluetooth device, and click to select the Bluetooth device after searching.

Step 3: Bluetooth connection. At this time, it will be prompted to enter the password,The Bluetooth speaker password of the speaker is:0000,After the password is entered, it will be automatically connected to the audio,At the same time, the Bluetooth speaker will "beep".

Some Bluetooth pairing passwords are: 1234).

The steps to tune the speaker and microphone are as follows:

1. System connection. The adjustable frequency wireless microphone receives the host through the wireless microphone, receives its sound signal, the receiving host is connected with the power amplifier equipment using an audio cable, the audio is connected with the power amplifier through the audio cable, and each device is connected to the market power socket.

2. Turn on the power switch of the wireless microphone and the receiver, and the display screens of the wireless microphone and the receiver will display the current channels and frequencies respectively. Under normal circumstances, after the power switch of some wireless microphones and receivers is turned on, the wireless microphone receiver will automatically match the current frequency and channel of the wireless microphone through the function of automatic linking by infrared scanning.

3. If the wireless microphone and the receiver host without microphone have been automatically linked, there is no need to manually tune the frequency. If the wireless microphone and the wireless receiver are not automatically linked, they need to be manually adjusted to the wireless microphone or the microphone-free receiver to achieve the binding.

If the wireless microphone is now automatically connected, the receiver and the microphone are marked with the transmit and receive frequency. Pairing is required only if the frequency is consistent.

Question: Now it's mine, and one of my microphones didn't pair successfully.

Question: Once the battery was installed upside down, and then it was like this, will it be caused by this?

I've always used it to ask questions, and once the microphone broke down when it was loaded with a battery and a meal.

Left-click and double-click the speaker in the lower right corner of your computer, click "Options" in the upper left corner of the pop-up column, and tick "Microphone Volume" in the drop-down bar of "Show the following volume controls". Then adjust the volume to the right one. Don't be too big, or you'll howl.

If there is no sound, it must be a problem with the microphone and the computer.

What is the stereo?,Can the computer compare with him?,There is no door.,300 microphones are already very good.,Spend some time and money to solve the computer.。

Playing audio on a computer is two different categories. There has to be a certain amount of investment. A good sound card is definitely a must. There are also monitors. Otherwise, it may sound good to you, but it's not really good.

You also need a separate sound card, as well as burning software.

Double-click the small speaker in the lower right corner of the screen, and remove the tick before mute under the microphone volume on the panel!

If you don't have the Microphone Volume panel, you click on Options, Properties, and check the Microphone Volume checkbox.