The computer shows an ES1000Server EXE application error

If this system error pops up, there must be something wrong with the system, just change the system disk and reinstall the system.

Note: It is possible to use a USB flash drive or hard disk, and the installation speed is fast, but the key is: to have a compatible (compatible with IDE, ACHI, RAID mode installation) and can be automatically and permanently activated, verified system disk, so that you can reinstall the system smoothly.

Here's how:

Prompt at the top,Application error,The dotted English is the program name,Search on the Internet to see what the program is,Or what are you operating? After finding it, uninstall and reinstall it to try, it still doesn't work, change to similar software. If you can't find the reason, uninstall the first thing before the accident, restore the system or reinstall it (if you have any questions, please ask me).

If it is a program that appears at boot, see if there is this option in the boot startup, if there is a removal of it, if it is a system process, the above method is not applicable.

1) If it is a problem with the broadband itself, first directly connect the broadband network cable to test, if it is a broadband problem, contact the broadband customer service to solve it.

2) If it's a problem with the router, if you can use a split hand and can't use it for the time being, my own practice is to disconnect the power supply of the router and plug it in, and I'll take a look. In there is a factory reset, it can be used from the new settings (this is under the premise of the correct physical connection, sometimes caused by the router's slow or failed IP address search, not that the router is broken).

If it can't be solved all the time, it is recommended to call the customer service of the router, they have **** guidance, I encounter a problem that I can't solve by myself, it is very useful to consult the advice they gave, and they will give the correct advice for your settings or operations.

3) If you turn off the wireless switch, turn it on, if it is a wireless connection with software, it is normal for the software to be difficult to use and often have problems, there is no better way to shoot squarely, use a router. In addition, it is caused by the network card driver is not or is not suitable, and whether there is a problem with the network cable interface or network cable.

4) If it is caused by a system problem, it is recommended to restore the system or reinstall it.

Steps to resolve application errors:1First of all, rule out the cause of the virus, use the latest version of 360 antivirus to quickly detect and kill for 3 to 5 minutes, and click to deal with it immediately according to the inspection results.

2.If the application error prompts that a file is missing, it may be that the file is corrupted, according to this component to query which system component is damaged, reinstall the relevant component, restore the program file, and generally solve the problem.

3.If the components of the software itself are missing, you only need to reinstall the software. For example, when running Thunderbolt, it prompts that a certain file is missing, you can try to reinstall Thunderbolt.

4.If the above method does not work, it may be a conflict between the software. The workaround is to try closing a couple of unrelated running applications and see if the error will reproduce.

If it has been resolved, you will know which two software conflicts are and can be resolved by not running both software at the same time. Or feedback the fault to the manufacturer and urge the manufacturer to upgrade and solve it. If you don't know which software conflicts, the feasible solution is to use 360 Security Guard's system optimization, and in one-click optimization, turn off some infrequently used software startups.

In this way, there are fewer programs running after booting, and the probability of collisions will decrease.

5.For another application error, the screenshot shows "the application is faulty, the **memory address cannot be read or written", this situation is the most complicated, if the above methods can not be solved, it is likely to be a hardware (mainly memory) failure, may be poor compatibility, can only contact the hardware ** vendor for repair. Or reinstall the system, which may be effective for a short time after reinstallation.

Reasons for application errors.

1.Caused by virus Trojans, in today's Internet era, viruses often sit in order to get more profits, often virus kidnapping applications and system files, and then some security antivirus software will be infected by virus Trojans applications and system files as viruses kill the application error.

2.The application components are missing, and the complete operation of the application requires some system files or some LL files to support, and if the application components are incomplete, the application will also cause application errors.

The application is abnormal caused by the bug of the application itself, no one is perfect, and the program is the same, the programmer can only try to make the bug appear as little as possible, and solve a bug when there is one.

3.The application software is incompatible with the operating system or other application software, causing the application to be abnormal.

4.Problems with the operating system itself, bugs in the operating system itself, can also cause crashes with application errors that the memory cannot be read.

5.Computer hardware compatibility can also be caused, as well as poor heat dissipation, overclocking, etc.

Application error workaround.

First rule out whether it is caused by a virus Trojan, please use Kingsoft Guardian to check and kill Trojans, and enter the main interface to enter [Trojan].

Then click [Quick Scan].

2.Use Kingsoft Guardian to fix vulnerabilities and solve application abnormalities caused by the system itself.

Enter the main interface and enter [Bug Fix].

Then click [Fix Now].

3.If the application error is caused by a single application, try reinstalling the software and reinstalling it. If it still doesn't work, close other software to see if it solves the problem.

4.If the above methods still can't solve the problem, then it can be caused by hardware problems, then check the memory module, motherboard, heatsink and so on. It is recommended to find a professional hardware repairer to solve this problem, and it is not recommended that you solve it manually.

There are several ways to do this.

1. Boot into safe mode, select the latest normal boot 2, system restore, select the date before the problem to restore the system 3, and reinstall the system.

It's OK to delete the startup item. msconfig

The system appears that the memory cannot be"read"or"written"The reasons are:

1. The driver is unstable and incompatible with the system, which is most likely to cause memory cannot be read or file protection.

2. One or more rogue software is installed on the system, which has a greater chance of IE or system crash, and file protection may also occur.

3. There is a conflict between the programs loaded by the system or the programs that are running on the system, especially some antivirus software monitoring programs.

4. There are vulnerabilities in the system itself, which makes it vulnerable to network attacks.

Reinsert the memory, and if it doesn't work, make the system. These are the two problems with this situation. Mine is solved by reinstalling the system.

2. It is also possible that the memory module is broken.

3. There is a problem with other related software to be used in the software.

4. The software and system are incompatible.

5. The software itself has bugs.

6. There is a conflict between the software and the software.

Solution: 1. Change the software again.

2. Replace the memory module.

3. Take a look at the recent software and uninstall it.

4. Patch the software or try the compatibility mode of the system.

5. Re-installation drive. If you are using a new system, you need to install the motherboard driver first.

First "check and kill", after the investigation is completed, delete the "suspicious auto-start items" and Trojans, and then restart the computer!

Then click on "Quarantine|".Recovery" area, find "Suspicious Auto-Start Item" and Trojan, and click "Delete completely"!

Then click "Repair", "Select All", and then "Repair"!

7. If it really doesn't work, just "one-click restore" the system or "reinstall the system"!

Memory instructions cannot be read, which is a common problem in the use of computers, memory is a storage component on the motherboard, which is an important part of the CPU to communicate directly with and store the data and commands that are currently in use (i.e., executing). When you type a command with your keyboard or mouse, the CPU interprets the command and loads the instruction or program into memory so that the program can be executed. Once the memory is faulty, the program cannot be executed, hence the warning of the "This memory cannot be read or written" error that we mentioned earlier.

Of course, the failure that "the memory cannot be read or written" is not necessarily a memory problem, but also a bug in the computer that has a virus or Trojan horse and the program itself. It's hard to tell what caused it, and it's hard to rule it out for a while, but it doesn't matter, press OK, cancel, restart, and you can do it. Interested netizens can try to solve the problem with the following methods:

1. There are too many programs open, if there are too many documents or too many programs running at the same time, and there is not enough memory to run other programs, you should close the programs and windows that you don't use at any time.

2. There are too many programs that run automatically, close some startup programs, start-run-msconfig--- start.

In addition to anti-virus software and input methods, general programs can be turned off.

3. The physical memory is too small, and the memory of the marriage management is increased; The memory and motherboard are not plugged in properly or other hardware is incompatible.

Reinsert the memory or change the slot.

Dual memory is not compatible.

You want to use the same brand of memory or just one memory.

Inferior memory modules or memory modules are broken.

Replace the memory module; Set up virtual memory appropriately.

4. Excessive fluctuation of mains voltage, or the use of inferior power supply on the PC, will bring damage to the memory, and replace the power supply with high power and high quality.

5. The PC chassis is full of dust, or the PC working environment is relatively humid, which will also cause abnormal operation. Dust removal in time.

6. CPU and graphics card heat dissipation problems.

Improved heat dissipation. 7. There is a problem with the hard disk.

Scanning, repairing, or replacing the hard drive. 8

Driver issues. Reinstall and update the driver.

9. Illegal operation, the system cannot be executed.

11. There is a problem with the system itself.

Sometimes there are bugs in the operating system itself, so it is best to install the official update program and reinstall the system if necessary.

12. Virus problems.

Antivirus; Antivirus software conflicts with the system or software.

Since the antivirus software enters the underlying monitoring system, it may conflict with some software, so try uninstalling it.

Hello, dear! I'm glad to answer your questions, I'm Xiao Lin'er! I've seen your question and I'm sorting out the answer, please don't worry, if there are a lot of people, you need to wait a while! Thank you for your understanding!! 

Hello for you to find out, it should be caused by software incompatibility or configuration error, 4, so that the hard disk is repaired, as shown in the figure below, the problem has been successfully solved.

Please give me a thumbs up, thank you

This is a problem with Rising Antivirus, it is recommended that you use the strong uninstall of 360 Security Guard to uninstall it! It's best to clean up and optimize the boot items under boot first, and then boot into safe mode before uninstalling!

Problems with Rising Antivirus, uninstall and reinstall, or uninstall other antivirus software.