When reversing into the garage, how to judge whether the body is correct or not

The way to judge whether the body is correct: before you reverse into the garage, you can get out of the car to find an object or mark in the middle of the rear of your garage to make a reference When reversing, take the driver's brake and the rear windshield in the center to align the reference object you found in advance, and align it to achieve three points and one line, then your car will definitely stop right After a period of familiarity, basically you can easily put the position of the car at a glance when you park.

As for the question of whether the steering wheel is correct, it is only to look at the steering wheel, but the steering wheel will also have a certain gap after the car has been used for a long time, and it is not allowed to look at the steering wheel at that time, the way is to look at the tires of the car!

The steering wheel, the big opening is on the top, and the small mouth is on the bottom, which is back to the right.

When reversing into storage, how to judge whether the body is correct?

Look at the rear mirrors on both sides of the same size, it's right.

First of all, you can look at the reference outside the car.

Observe that your car is very parallel or perpendicular to a reference.

As for the question of whether the steering wheel is turned right, you have to remember it yourself.

The steering wheel can only be turned for a maximum of two and a half turns.

When you don't know if the steering wheel is back exactly.

Teach you how to die.

You turn the steering wheel to the left or have to kill in the opposite direction will be two and a half turns.

When you die, pay attention to the steering wheel for a few laps, and then go back a few laps, and you will know after a long time. I was the same at first.

Driving is to feel, people who have a feeling can practice their driving skills very well, and they will drive the same for a lifetime without that feeling.

Reversing into storageThe way to judge whether the body is correct or not is to observe and use a reflector to assist.

Observe the reversing lane, there are some traffic spots or parking lots behind the vehicle that are usually drawn to help determine if the vehicle is on track. According to the position of the reversing line and the relative position of the body and the reversing line, observe whether the body remains parallel to the reversing line. Mirror observation: During reversing, the position of the vehicle can be observed through the rearview mirror and the exterior mirrors on both sides.

The main attention is to observe whether the rear and side of the car are kept at a certain distance and angle from the predetermined parking space line to ensure that the position of the body and the parking space are consistent. Referring to fixed objects, when reversing into the garage, you can choose to find a relatively fixed object between the car body and the parking space as a reference, such as a pillar or wall in a parking lot. By observing the position relationship between the body and the reference object, it is possible to determine whether the body is positive.

Judge the direction of the front of the car, and when reversing into the warehouse, you must first determine the direction of the front of the car. The front of the car is aligned with the predetermined parking space for the vehicle to enter correctly. Practice and experience, through repeated practice and practice, coupled with the accumulated experience, can improve accuracy and judgment ability, and better judge whether the body is correct or not.

It should be noted that during the reversing process, it is necessary to maintain the observation of the surrounding environment and the vehicle, and make reasonable adjustments and corrections. If you are not sure whether the body position is normal, you can try and adjust it several times to slowly find the best angle and position. Some drivers choose to use their senses to determine the position of the vehicle.

For example, by feeling the rotation of the steering wheel and the slight movement of the car body, it is possible to determine whether the car is parallel to the parking space or aligned with the reference.

The importance of reversing and warehousing skills and experience

Reversing into storage is a driving operation that requires skill and experience. Through the training and continuous practice of reversing and storage, as well as accumulating experience, the driver can improve his ability to judge whether the body is buried in the bridge. By adjusting the front orientation reasonably, the number of vehicle position adjustments can be reduced.

The accuracy of judging the position of the vehicle body by observing the reversing line, referring to fixed objects, and using reflectors.

Drivers should also maintain a patient and calm mind, gradually become familiar with their vehicle characteristics through continuous practice and practice, and develop the ability to accurately judge the position of the vehicle body. Reversing into storage requires certain skills and experience. Through skill training, experience accumulation, and continuous practice and adjustment, the driver can better judge whether the body is correct and complete the accurate reversing and storage operation.

<> "How to judge whether the body is correct when reversing into storage?" Try these 3 tips!

When reversing into the warehouse, whether it is the left or the right library, it is not difficult to see the direction. The difficulty is that after the car is put into storage, the body is not in a state of alignment, and countless students have failed because of the line.

Many students have this confusion when practicing: they clearly feel that the body is already straight. But when they got out of the car, they realized that the distance between the two sides was very different from what they saw in the car.

In the reversing and warehousing project, how to ensure that the body is positive after warehousing is particularly important.

How can you tell if the body is upright?

Method 1: When the rear of the car has entered the garage and the front of the car has not yet entered the garage, if the rear of the car is tilted to the sideline side, the reason is that it is too early or too fast to return to the steering wheel. Changing sails refers to the phrase that if the midpoint of the rear of the car is not aligned with the midpoint of the bottom of the garage, you will put the steering wheel in the right place.

Method 2: When the rear of the car has entered the garage and the front chain of the car has not entered the garage, if the rear of the car is tilted to the side of the center line, the reason is that the time to return to the steering wheel is too late or too slow. In other words, your car's steering wheel hasn't been righted yet when the midpoint of the car's rear is already at the midpoint of the bottom of the garage.

Method 3: When reversing, the front of the car must extend to the middle of the width of the car, and the middle point of the rear of the car must be aligned with the middle point of the bottom of the garage. At this point, the direction is straight. If you notice that the rear of the car is slowly leaning to one side, it proves that the direction is not straight.

When reversing into storage, if you want to judge whether the body is correct or not, you need to look at the left and right rearview mirrors, and you can observe whether the body is parallel to the side line through the rearview mirror.

The correct way to reverse the banquet into storage:

1. After the vehicle is parked in the appropriate position, hang the reverse gear, and then reverse in a straight line, and then hit the right full direction after reaching the standard point of the right direction.

2. Then observe the right rearview mirror of Hehu, the change of the library angle and the body, less than 30 cm, you need to return the steering wheel to the right, continue to reverse, more than 30 cm do not need to move, you can go back half a circle to continue to reverse.

3. After returning to the right direction, observe the right rearview mirror, the corner of the library and the front door handle, and when the front door handle is to coincide with the corner line of the library, the steering wheel is full to the right.

4. Observe the left rearview mirror, and you need to return to the right direction after the inner library angle appears. After returning to the center, the two sides need to be parallel, and then look at the left rearview mirror, the lower edge of the rearview mirror and the library edge line can be parked on a line.

When returning to the steering wheel, observe whether the middle position of the rear of the vehicle and the middle position of the bottom line of the garage are in a straight line; When reversing, observe whether the middle position of the parking space and the middle position of the bottom line of the garage are kept in a straight line; Observe the left and right mirrors to determine if the body is aligned; It is also related to whether the rearview mirror is a flat mirror or a convex lens, the flat mirror looks at the body parallel to the sideline, and the actual parallel, and the convex lens looks at the tail slightly narrower than the front, and it is actually parallel.

The body is parallel to the library line.

Precautions for reversing into storage:

When the car is driven to the starting position, the body should press the white line in front of the right side of the garage, but do not exceed.

When reversing, pay attention to the line point, kill the direction, and look at the storage point from the reversing mirror.

After the car enters the garage, the car must be back to the right, do not turn left and right.

After entering the warehouse, be careful not to pour too much, and stop when entering the warehouse.

When leaving the left warehouse, pay attention to the size of the left body distance from the library line, and adjust the steering wheel appropriately.

The left out of the warehouse must be out of the library to reach the specified position.

Reversing into storage

1: Through the left and right rearview mirrors to see whether the body is parallel to the wide library line of the car tomb to judge whether the body is correct.

2: Before you reverse into the garage, you can get out of the car to find an object or mark in the middle of your garage to make a reference, when reversing, the driver's brake and the rear windshield are in the middle to align with the reference object you have found in advance, and align it to achieve the three points and a line, then your simple car will definitely stop right.

Reversing into the garage to determine whether the body is upright, that is, whether the steering wheel is right. The method is as follows: 1. In the process of reversing, the head must be stretched to the middle of the width of the car, and the midpoint of the tail of the car is aimed at the midpoint of the bottom of the garage with the eyes and go straight.

2. When the rear of the car has been put into the garage and the front of the car has not been put into the warehouse, if the tail of the car is biased to the side of the sideline, the reason for the blindness is that the time to return to the steering wheel is too early, or too fast. 3. When the rear of the car has been put into the garage and the front of the car has not been put into the warehouse, if the rear of the car is biased to the side of the center line, the reason is that the timing of returning to the steering wheel is too late and sleepy, or it is too slow.

Many students asked how to correct the body in reversing, and it should be clear that the reversing will not deduct points because the body is not correct, as long as the line is not pressed. But the body is crooked, after all, it is not very good-looking, if you can, you should try to keep the body parallel to the library lines on both sides is the best. So let's talk about how to see if the body is correct when reversing into storage, and how to correct the problem of the body.

How to see if the body is not correct when reversing into the warehouse

To see if the body is right, we only need to observe whether the body is parallel to the sideline through the left and right rearview mirrors. The principle of adjustment is to hit the rear of the car in the opposite direction. When the steering wheel is reversed, nearly half of the body is already in the garage, so this is the best time to correct the body.

How to correct the body in reversing and warehousing

Taking the rear of the car to the left as an example, in the left rearview mirror, you can see that the body and the sideline show a large position relationship between the front and the back.

At this point, we need to make a circle to the right, let the rear of the car go to the right, distance it from the left sideline, and return to the right direction when the body is parallel to the sideline.

Then we keep the positive direction and go backwards until the lower edge of the mirror of the rearview bridge coincides with the edgeline.

As for the parking space bend bucket to the right is also a reason, here is not a word. When reversing, be sure to use the clutch to reduce the speed as much as possible so that you have enough time to adjust. At the same time, you don't need to sit up straight when looking in the rearview mirror, and you can lean out a little to help detect whether the body is wrong in advance.