How to reverse, how to reverse

Reversing warehousing method:

Subject 2: Reversing into storage** (taking right reversing into storage as an example).

In the first step, the vehicle travels to the designated position at the front of the lane, about 2 meters away from the left sideline, to ensure that the vehicle is parallel to the dotted line and close together.

The second step is to engage the reverse gear and turn on the left turn signal, gently lift the clutch to make the car start to move backwards, and control the speed. When you see the right corner of the garage aligned with the middle of the lower edge of the right rear triangular window of the car, quickly hit the steering wheel to the right. After the steering wheel is killed, pay attention to the right rearview mirror, after the right front corner of the library is exposed, adjust the distance between the body and the corner of the library about 30 cm, if it is less than 30 cm, the steering wheel is adjusted back half a circle, otherwise it is greater than 30 cm and continues to kill to the right.

The third step is to move backwards, and when you see the entire left sideline parallel to the body from the left side mirror, immediately return to the steering wheel. Observe the rearview mirrors on both sides, straighten the body, see the distance between the body and the left and right sides, and adjust the direction.

Fourth, pay attention to observe the left side rearview mirror, the rear wheel distance from the bottom line is about 30 centimeters when parking, when retreating to the library line near the left rearview mirror lower edge of the park.

Xiao Kun said that the car, so that you don't have to worry about driving a car!

The left fly reverses into the warehouse, and the left fly also needs to be played in advance, otherwise the right body is easy to sweep the line.

When reversing into the warehouse, you must look at a few points, and then grasp the timing well, and you can pour it in directly.

1. When the vehicle runs to the left rearview mirror and hits the control line, the steering wheel is killed to the right.

2. Look at the left rearview mirror after hitting the direction to the right, and see the direction of the library angle back to the right from the left rearview mirror.

3. After the direction returns to the right, retreat to the left front door when the handle is pressed on the left library line, and then the steering wheel is killed to the right.

4. When you see the corner of the left bottom line, the steering wheel returns to the right.

5. Wait for the body to be vertically and parallel to correct the body and reverse the car into storage.

6, after adjusting the body to look at the left rearview mirror, when the left rearview mirror shell under the edge of the front line of the library, the rear distance of 30cm, at this time to stop the car.

The operation skills of reversing into the garage are: from the starting point into the garage - from the garage to the Hui's defeat point - from the return point to the garage - from the garage to the starting point.

During the operation, the driving speed should be controlled, and the whole process should be idle with 1 gear or reverse gear, and the starting speed and driving should be consistent. In the process of controlling the timing of steering, we should observe carefully, grasp the key points of steering, and turn in a timely manner.

At the same time, when controlling the driving route test, the driving route of the car mainly depends on the speed of turning the steering wheel and the driving speed.

Pacific Automobile Network] reversing storage method: 1. First cross the car forward and the front car is level, and the distance between the two cars depends on the length of the parking space and the width of the road. 2. Turn the steering wheel to the right and fall backwards near the position of the dead spike point until the right front corner of the car is close to the left rear corner of the front car, and then start to turn the steering wheel back.

After the right is reversed, it will be put into the garage until the front right corner of the car is close to the left rear corner of the front car.

Invert the left library. 1. Hang the reverse gear, release the handbrake, slowly lift the clutch to the semi-linkage, stabilize the clutch after starting, and reverse backwards at a slow speed;

2. Turn back to the right rear to observe the right rear door triangle window, when the front center rod of the library reaches the front of the triangle window, the direction will be quickly killed to the right;

3. If you observe that the right rear of the car is likely to hit the middle bar, quickly turn back to the left in a large direction, wait for a while, and when it is estimated that the rear of the car will not hit the middle bar, continue to hit the right direction;

4. After the rear of the car enters the garage smoothly, observe the left reversing mirror, and when the left body line is parallel to the left side line of the library, quickly turn the direction to the left;

5. After the head of the car is dismantled and successfully put into the warehouse, observe the flat condition of the body and the sideline backwards to correct the direction, and maintain the direction after repairing;

6. After arriving at the stop sign, stop the car.

Pour the right library. 1. After Ping's roll is stable and reversing, when the body reaches the position of the killing mark, the direction is quickly killed to the left;

2. After approaching the middle rod, when the left rear is likely to touch the middle rod, quickly return to the right in a large direction, wait for a while, and it is estimated that it will not touch the middle rod, and continue to hit the left direction;

3. After the rear of the car enters the garage smoothly, when the left body line is parallel to the left side line of the garage through the left reversing mirror, the direction is quickly returned to the right;

4. Adjust the left and right appropriately, and stop with the stop sign.

Photo by Pacific Automobile Network Q&A).

1. After arriving at the parking place, shift the reverse gear, then reverse in a straight line, find the point to the right to hit the first direction and quickly hit the right full direction, whether it is a left or right reverse library, you can use this method.

2. Look at the right mirror after playing the full direction, observe the foot and the body of the library and what kind of changes, when less than 30 cm, quickly turn the steering wheel back to continue to reverse, such as the brother staring at the fruit distance is greater than 30 cm, you don't need to move the direction, you can go back half a circle directly into the warehouse.

3. Continue to reverse after returning to the right direction, look at the right rearview mirror, pay attention to the feet and the front door handle, when the door handle is about to enter the corner of the library, quickly continue to reverse in the direction of the right full direction, and then observe the left rearview mirror.

4. When the inner library angle appears, it quickly returns to the positive direction, and if you feel that the car is tilted, you can adjust it appropriately.

5. When the two sides are parallel after returning to the center, look at the left rearview mirror, when the lower edge of the mirror and the edge of the library are pasted or pressed to the line, you can stop, this is the step of the right library.

6, after the completion of the right inverted library to change forward a copy of the file, and then look at the left rearview mirror, when the left rear wheel center and the foot of the library on the same line, quickly to the left or right full direction out of the library.

1. First hang the reverse gear, lightly lift the clutch and reverse;

2. Observe the left rearview mirror, and beat the steering wheel to the left when the left starting point sensing line slightly passes the left rearview mirror;

3. If the rear wheel of the car is about 30 cm away from the right corner, you do not need to correct the direction, and continue to reverse backwards;

4. If the angle between the wheel and the library is less than 30 cm, you can turn the steering wheel a little back to keep a distance of about 30 cm;

5. Pay attention to the rearview mirror, and quickly return to the steering wheel when the body is parallel to the edge of the library;

6. Observe the left rearview mirror, and stop when the lower edge of the rearview mirror coincides with the yellow line.

a) right inverted storage.

1. The middle of the steering wheel is open to the landmark line, and the shoulders are aligned with the dotted line to stop the car (in the figure, position).

2. Hang the reverse gear, go backwards, observe that the lower line of the left rearview mirror coincides with the yellow dotted line in front (that is, the position of the figure number), and the steering wheel is immediately full to the right.

3. Backwards to observe the right side of the rearview mirror, the rear of the car just blocks the dotted line (that is, the point of the figure number), and the steering wheel immediately turns back to the left half a circle.

4. Continue to retreat, observe that the left side of the body is collapsed and parallel to the local yellow solid line, and make a circle to the left.

5. Continue to retreat after the steering wheel is back to the center, and stop when the lower edge of the left rearview mirror coincides with the left storage line.

b) Left inverted library.

Hang in the forward gear, observe the left side mirror, the rear wheel is close to the line, the steering wheel is a quarter of a circle to the left, continue to drive forward, and the shoulder position is aligned with the yellow dotted line to park.

3) Left inverted library, right inverted library.

Similar to (1) and (2), the method is the same.