How to judge the corner of the warehouse when reversing into the warehouse, and how to look at the c

Updated on Car 2024-03-19
7 answers
  1. Anonymous users2024-02-07

    When the car slowly enters the garage, look through the mirror and turn the car body into a slightly narrower angle between the car and the garage.

    Back to the right, at this time the body is within 30 cm from the corner of the library.

    Look at the right side of the reversing into storage.

    The method of the distance of the storage angle, if the steps are not completed when reversing into the warehouse, it is impossible to observe the storage angle

    1. When reversing, hit the steering wheel right when the entrance line section of the project is about to reach the edge of the window.

    2. Observe from the right side of the reversing mirror, and turn the steering wheel back when the line segment is about to touch the mirror.

    3. Continue to observe the reversing mirror, and turn the steering wheel right again when the corner of the front entrance of the reversing garage is about to touch the edge of the mirror.

    4. This time, the body will slowly enter the garage, observe from the mirror, and turn the steering wheel back to the center when the body and the garage turn into a slightly narrow angle, and slowly pour it in.

  2. Anonymous users2024-02-06

    Left into the warehouse, this does not need me to say, you can enter on time, and the left is killed and poured in to return to the positive. (In fact, sometimes you need to adjust it, but in the early stage, just come in with a plate, and try to adjust it when you can adjust the steering wheel in the later stage).

    When the right rearview mirror is in the right rearview mirror, the corner of the library and the body are kept so wide, when poured, look at the distance between the right rearview mirror and the body of a fist, it is necessary to start to return to the steering wheel to the left, you can first go back to a circle or so, and then look at the distance of this punch while pouring, and then hit the left when it is small, and hit the right when it is big, and finally wait for the body to return to the steering wheel. When hitting the steering wheel, you should look at the rearview mirror while playing, and use the distance of this punch as a standard to judge whether you hit more or less.

    Pay attention to how much the steering wheel hits when you play, whether it is half a circle or a circle or back to the right, don't forget to hit the right when you don't know where to go.

    In fact, the reverse library, the steering wheel is very important, you have to learn slowly, otherwise the library is very disadvantaged, others in the car when you can be in the co-pilot or the back seat, while watching and learning, the key is to learn this feeling, when reversing to know where the car to the steering wheel should be hit, if you reach this level of proficiency, adjust the disk you will learn, the library is not much of a problem.

  3. Anonymous users2024-02-05

    When reversing into the garage, there is an error in observing the distance between the body and the corner of the garage through the rearview mirror. The distance between the rear wheel grounding and the storage angle is estimated in the rearview mirror, but this is an error with the actual distance, and it is necessary to practice more to grasp the error.

    Reversing into storage. 1. Scores.

    Those who do not follow the prescribed route and sequence are not qualified; If the body is out of the line, it is unqualified; If the warehouse is not entered, it is unqualified; Those who stop halfway are not qualified.

    2. Tips: 1When you start reversing, you will rotate the steering wheel to the right and a half, and observe the wheel above the right rearview mirror, which should be about 40 cm away from the right line of the garage, so as to ensure that the right side will not press the line when reversing into the garage.

    2.Look in the left mirror, and when you can see the left line of the garage, immediately turn the steering wheel half a circle to the left and continue to reverse.

    3.If you look at the left and right mirrors, there are solid garage lines on both sides, and when the distance is about the same, immediately turn the steering wheel back to the left and continue to reverse.

    4.Look in the left rearview mirror until it completely covers the front of the garage and brake.

    5.Don't rush to turn left when moving forward, and pay attention to the left side mirror when it coincides with the vertical line on the side, and then turn the steering wheel to the left and a half.

    6.The precautions for storage on the left are the same as those on the right, except that the rearview mirrors to be observed are in reverse order.

  4. Anonymous users2024-02-04

    The key point of reversing and warehousing is to look at the rearview mirror (body door handle rear wheel) and the distance between the library angle is 30 cm, the mirror image in the rearview mirror is two finger width, and the body and the library line at this time is about 45 °, you can combine these two conditions to judge the vehicle position relationship. When the conditions are met, it is the key point in the direction of return.

    1. Before reversing into the garage, it is necessary to lead the line meter, here is the line meter or so, two keeps: keep the middle position of the bottom of the left rearview mirror and the yellow line coincide with the driving, and keep the left door edge and the width of the yellow line 1-2 fingers. 2. Hang into reverse gear, turn on the right turn signal, let the vehicle go straight back first, when you see the starting line in front of the left rearview mirror, and then continue to reverse in the direction of the right full direction.

    3. Observe the distance relationship between the right rear wheel and the library angle through the right rearview mirror, try to ensure that it is about 30cm, if the distance is too small, you can go back to a little direction to maintain this distance. The reverse steering wheel should be played early, not late. 4. After pouring into the garage, continue to judge the distance between the body and the garage line through the rearview mirror, and after confirming the balance between the body and the garage line, you can return to the steering wheel.

    5. When retreating to the bottom line of the garage near the lower edge of the left rearview mirror, step on the clutch and brake to stop.

    The driver's license test is to obtain a motor vehicle driver's license test, the content of the test subjects and the qualification standards are unified across the country, divided into four test subjects: theoretical knowledge, field driving skills, road driving skills, road driving skills and civilized driving related knowledge, the basic process of the driver's license test is to fill in **, physical examination, acceptance, payment, examination, certificate making, etc.

  5. Anonymous users2024-02-03

    Reversing into the warehouse to see the perspective method and specific steps introduction:

    1. Park the car at about 50 cm to the left of the car in front;

    2. The right side mirror is aimed at the B-pillar of the front car;

    3. The right is full and starts to reverse;

    4. When the car reverses to a 45° angle with the side car, the direction is full to the left and continues to reverse. This step may be more difficult for novices and prone to deviations, don't worry, you will become much more proficient with more practice;

    5. When the front of the car is aligned, return to the right direction, and then adjust it according to the distance between the front and back. It is worth noting that do not get too close to the car in front of you, and leave a good distance when parking;

  6. Anonymous users2024-02-02

    1. Generally, the right corner of the library is in the middle of the rear triangle window (everyone's seat, height and other factors, you can try a few times to find the best point of view, that is, you can enter it with a wheel) or within a certain range before and after.

    2. Directly backward 150cm to the right to kill, wait for the car body and the garage level and 30cm away from the right direction, the garage horizontal line and the lower edge of the rearview mirror and the eyes into a line when let the source, step on the clutch, step on the brake.

    3. Parking and reloading are completed. If you reverse the warehouse to the left, the operation is the opposite.

  7. Anonymous users2024-02-01

    How to judge the reversing storage body and the storage angle of 30cm is as follows:

    The distance between the body and the library angle of 30cm mainly depends on the distance between the rear and the library angle, which is controlled to 10 to 25 cm.

    The distance between the body and the storage angle of 30cm is judged by judging the distance according to the rearview mirror; Determine the distance by the position of the wheels; The car shadow occupies all the rearview mirrors, and the distance between the cars is 3m; The car shadow occupies two-thirds of the rearview mirror, and the distance between the car is 5m; The car shadow accounts for half of the rearview mirror, and the distance between the cars is 9m; The shadow of the car occupies one-third of the rearview mirror, and the distance between the cars is 12m.

    Reverse steps: hit the steering wheel on the right when reversing the library, and look at the reflector on the right after the killing. When the body is about 30 cm high from the No. 1 point, the direction quickly returns to the right.

    After returning to the right, when you are about to lose sight of the No. 1 corner, you will hit the right again in the direction of death. When the body is about to balance, the direction quickly returns to the right.

    Essentials of reversing warehousing operation:

    1. After the driver gets into the car, adjust the seat and rearview mirror, and fasten the seat belt, and then hang the car in reverse gear, release the parking brake lever, the car starts and reverses at idle speed, and the driver observes the garage through the right rear window.

    2. When you see that the black edge of the right rear window is aligned with the right line of the garage, turn the steering wheel to the right at a constant speed to the limit position.

    3. After the car is put into storage, the driver looks back at the left side mirror, and when he sees the left side line of the entire garage, he immediately returns to the steering wheel.

    4. Stop immediately when you see the left door handle and the bottom line of the garage from the left side mirror.

    5. When the car hangs 1st gear before driving Zen Nian out of the garage, when you see the hood close to the road sideline, turn the steering wheel to the left to the limit position, and the car stops straight behind.

Related questions
9 answers2024-03-19

Reversing warehousing method:

Subject 2: Reversing into storage** (taking right reversing into storage as an example). >>>More

9 answers2024-03-19

The so-called point is the point where you use a certain point as your visual reference to perform a specific action in the process of reversing into the warehouse. Whether it is the right or left storage, the most important points are two, that is, the point where you kill the steering wheel to the right (left) when the storage is reversed, and the parking point where the brakes are stepped on when the storage is almost completed. Now let's talk about the point of the right inverted library. >>>More

11 answers2024-03-19

There are four points for reversing and warehousing, and there is no problem if you learn to reverse and enter the warehouse!

12 answers2024-03-19

The rearview mirror can be adjusted regardless of whether it is automatic or manual. Normally, the left rearview mirror is adjusted to the far horizon in the middle of the mirror, the right mirror horizon is three-quarters, and the ground occupies three-quarters. If it is a side park, the right side can be temporarily lowered so that you can see the curb clearly (the car at the high-end point will have the function of automatically flipping down the right rearview mirror in reverse gear), and remember to turn it back after reversing. >>>More

7 answers2024-03-19

The driving track is to be according to the requirements of the vehicle management.