-
Flight Simulator x Take-off Method:
The ctrl+y key is just to change the keyboard operation to use the mouse instead of the joystick to operate and easily control the direction, in practice, the vertical tail is used to control the direction of the aircraft in the taxi, and the use of the joystick is easy to cause the aircraft to deviate sideways and cause the wing to touch the ground, if you are using a laptop, it is recommended to set the operation key of the vertical tail first.
Before takeoff, you should put down the flaps, the moderate flaps will provide lift for the aircraft to take off, about 5 10 ° on it, remember not to add more, otherwise it is difficult for the plane to speed up, and then remember to release the brakes before driving, and finally add the throttle to the maximum, pay attention to correcting the course in the run.
-
Drive the plane onto the runway, then press F4 to push the throttle valve to the maximum, wait until the speed reaches 5-10 degrees to raise the VR head, and then get up. It is advisable to sit down for a tutorial task.
-
Press F7 a few times to lower the flaps to the appropriate angle before accelerating and sliding;
Press the arrow keys " " " when the speed is sufficient
Note: Pressing F4 directly may cause engine damage, it is recommended to press F3 little by little.
Flight Simulator X is the tenth generation of the Flight Simulator series, the king of flight simulation games and one of the most famous series in PC gaming history.
-
What the two big brothers upstairs said is true, but it depends on what model you choose. Also, whether the engine has been started or not.
It is advisable to choose a paramotor. Then press the F4 button as upstairs to maximize the power. Then pull the lever both by pressing the arrow keys down.
-
Press F4 and press the button at a certain speed and it's OK.
-
Get on the runway, press F4 and wait until it's fast enough, just pull it up!
-
Just unplug the power cord.
-
Talking to the computer, he said affectionately"Dusting"
-
Affectionately said to the computer"Dusting"
-
See the title decisively post the machine.
-
How to control:
Press the F key to enter the plane, the W key can play an acceleration role, the S key can slow down, the A D key is to control the tail steering, the G key can be retracted or put down the aircraft wheel, the number key 5 is the up button, and the number key 8 is the down button.
When we press the F key to enter the propeller plane, we can press the W key to accelerate, and when the speed of the aircraft reaches a certain speed, we can press the number key 5 to take off, and then press the G key to put away the plane wheels. In the process of flying and dismantling, the rise is not bad, and it is too large, which can easily lead to stalling.
Selectable side quests increase the playability and freedom of the game, the protagonist has to complete many quests, and some details before some quests don't seem important, such as whether to go to the store to buy some before starting some quests to be fully prepared, however, the decision of these details may determine the success or failure of the mission.
The decisions made by the protagonist may not be important to the game, but they may affect the outcome of the mission. In fact, it can be said that it is the player's control and the virtual protagonist itself that leads the protagonist to success. The protagonist needs to go to the quest point to trigger the quest, and there is only one way to complete the quest.
Take-off in a real flight simulator requires an attitude gauge with a speed of 100. >>>More
I forgot what the ascii code is.,You just look for it.,This ** is very simple.,It's a case of imitation keyboard.。 >>>More
That game is super cute, right, the details are like this.,Anyway, I have no problem doing this.,I just tinkered with it today. >>>More
1: Why haven't I had a gardening opportunity at Horticulture Level 5? 2: If you don't fertilize some kind of high-level plant (such as 1: This looks at the face, you don't say that you will be able to receive it if you are level 5 2: If you don't fertilize, it won't wilt, and you can see the original post if you fertilize it
Like your age, independently designed proportional regulators, linear temperature displays, thyristor actuators, cut-off current limiting devices, for industrial production, a total of four voltage regulators, two transistors, one trigger transistor, several small diodes, three silicon steel core transformers, two high-current thyristors, this is not a simple cut-and-paste combination of the content of public literature; In that year, it was compiled into the textbook of automation major in a university. >>>More