Is it possible to buy a wireless router to connect iPod touch to broadband at home?

Yes, but the first time you use it, you also need to set up your router:

Plug the network cable into the WAN port of the router first, and then connect the LAN port of the router to the computer.

Then enter the account name and password (there is also a hint of raw data on the back of the router) OK.

After entering the settings interface, follow the setup wizard and you can surf the Internet normally.

If it is abnormal, you may wish to click the reset button of the router and set the router again.

Resources.

Yes, the more common home wireless routers are TP Link's TL-WR340G+ (54M) and TL-WR841N (300M); There are also Dlink's DI-524M (54M) and DIR-615 (300M). The ** of 54m is about 100 pieces, and the 300m one is less than 200. These two are more common, and of course there are other brands such as Netgate, Linksys, etc.

Yes, the most in the general market are TP-link, D-link and the like, all of which are good. About 100 pieces.

After getting it back, you have to set up the router, it's very simple, read the router manual.

Yes, Tengda and kick the fart order.

Hello, a router is not the same as a cat, in simple terms, you need to use a router when you need to give more than one computer or device to the Internet.

The wired router connects the device through the network cable, and the wireless router can be set up to allow the computer to receive the network signal without the connection of the network cable. Touch4 Internet access can only be accessed with a wireless router. Your touch does not support network cable connection (not to mention that touch does not have an interface for plugging in a network cable at all), and can only access the Internet by receiving the signal from the wireless router.

The details are as follows: buy a wireless router (generally about 100), and connect the wireless router, cat, and computer according to the manual (cats are also necessary). After the connection is completed, enter the settings on Touch4 - WiFi - Open - Touch automatically search for wireless routes - Click on your router name, enter the set password, and the connection is successful!

iPod touch5 wants to be able to access the Internet anytime, anywhere: apply for a CMCC account to access the Internet anytime, anywhere.

To access the Internet using CMCC, you must apply to China Mobile to enable this function.

iPod Touch5 Connected to CMCC Operation:

2.Select in the list of wireless networks"cmcc"Identified WLAN wireless network.

3.Once you have confirmed that the network has been found, open the browser "Safiri"to browse any web page.

4.The webpage will automatically redirect you to the China Mobile WLAN authentication page.

5.Enter your username (mobile number) and password.

After the password is successfully authenticated, you can use China Mobile WLAN to surf the Internet.

1 To buy an apple peel, you need to jailbreak and other operations.

2 Buy a 3G wireless router that can transmit wireless signals.

Buy a MIFI apple peel to convert 3G to wifi,

This can only find a wifi hotspot. This thing can't be plugged into a 3G wireless network card.

1. Buy a wireless router, connect the end of the network cable that was originally connected to the computer to the wireless router, and then draw a network cable from the wireless router to connect it to the computer.

2. What kind of broadband access method is the original, if you have a cat, you still have to use it, that is, add a router between the computer and the nuclear cat. Then set it up on the computer according to the router manual, but in the future, the computer will not need to dial up the Internet, just use the router to dial up. The signal distance is ordinary and can basically be fully covered at home, if you go through the wall more, you can ask for a good point, the kind with a strong signal and multiple antennas.

3. If you want to use touch to surf the Internet, you can only use a wireless router. The specific connection method is as follows: electric to slow limb cable - > demodulator - > network cable - > connected to the wireless router WAN interface - > from the LAN interface and then connected to a network cable - > connected to the desktop computer.

Use the Wi-Fi router's wide Na Na with auto-dialing method, and look for it again on the Internet. It is also available in the manuals of the router.

4. Wireless routing: TP-Link WR340G+ about 100. Or any other brand of wireless router.

No, it's simple. Turn on the wireless function of the wireless router. Then open the settings of the touch, there is a wifi inside.

Once inside, you'll see the source of your wireless router. Click join, and the annihilator joins. If you set a password, enter the password and log in, and you can change your posture.

If you can't log in, turn it off** or switch it to an automatic try, click to renew the lease, and your network address appears to access the Internet.

No set-up. Just find the wifi directly and search for the internet at your home. itouch2 3 4 have been personally tested, if you can't connect, go to Cong Dismantle to check the problem of Fan Zhengtong's wireless routing state.