Can I install a wireless router without a broadband password?

Yes, the configuration method:

1.The router is connected to the network.

Connect the network cable to the WAN port of the router, and use the network cable to connect the computer to any LAN port of the router. When the LAN port flashes when the computer is turned on, it means that the computer has successfully established communication with the router.

2.The system is connected to the router.

Turn on the wifi of the computer, search for the default wifi name of the router (the nameplate on the back of the router is written), and connect to the wifi network. The first time you use the router, you generally don't need to enter the wifi password.

3.Go to the gateway page.

Open a computer browser and enter the gateway IP address of the nameplate on the back of the router (generally, enter the gateway configuration interface. (This interface will pop up automatically for new routes).

4.Set up a way to access the Internet.

Go to the WAN port settings in Advanced settings. Select DHCP Auto Acquisition.

5.Set the wifi name and password.

Go to Wireless Security in the Wireless Settings and select WPA2-PSK mode for Security Mode. Select AES for WPA encryption rule. Set up a wireless network key. The router will automatically restart after setting, please enter a new wifi password to connect.

6.The configuration is complete and you can enjoy the network.

No, because routing is to dial up the Internet instead of the computer.

A router is a router that connects various LANs and WANs on the Internet.

It will automatically select and set the route according to the situation of the channel, and send the signal in the order of the best path. A router is the hub of the Internet"Traffic police.

At present, routers have been widely used in all walks of life, and various products of different grades have become the backbone network for implementation.

The main force of internal connection, interconnection between backbone networks, and interconnection between backbone networks and the Internet.

The main difference between a route and a switch is that the switch takes place in the OSI reference model.

Layer 2 (the data link layer, while routing takes place at the third layer, which is the network layer.

This difference determines that routers and switches need to use different control information in the process of moving information, so the way they achieve their respective functions is different.

A router, also known as a gateway, is used to connect multiple logically separated networks, and the so-called logical network represents a single network or a subnet.

When data is transferred from one subnet to another, it can be done through the router's routing function.

Therefore, the router has the function of judging the network address and selecting the IP path, it can establish a flexible connection in the multi-network interconnection environment, can connect various subnets with completely different data packets and media access methods, the router only accepts the information of the origin server or other routers, and belongs to a kind of interconnection device at the network layer.

The router is not directly connected to the Internet, and the network cable is connected to the intranet data bridge, which does not require a broadband account and password.

1. Prepare 2 network cables, one end of which is connected to any LAN (1 2 3 4) interface on the main router, and the other end is connected to the WAN interface of the secondary router; The other network cable connects one end to any LAN on the secondary router, and the other end to the computer.

1. Two network cables are required, the first network cable connects the main router and the secondary router, the main router is connected to the LAN port, and the secondary router is connected to the WAN port. The second network cable connects the secondary router to the computer, the secondary router is connected to the LAN port, and the computer is connected to the network cable socket.

OK. Plug the network cable directly into the computer, enter the broadband password and connect directly.

Transmission technology, switching technology, access technology. The broadband transmission network is mainly based on SDH (Synchronous Digital Series) based on large-capacity optical fiber networks; A broadband switched network is an integrated service digital network using ATM (asynchronous transmission mode) technology.

Broadband access networks mainly include optical fiber access, copper access, hybrid optical fiber copper access, wireless access, etc. Internet café broadband means that all computers are transmitted from the end of the bureau to the host of the Internet café's Internet access software, and the host of the Internet café uniformly distributes the network to the billing host of the Internet café. Each computer is billed by the billing machine.

No, the wireless router must have broadband, and the router also needs to be set up to be used normally, and the installation and setup steps of the router are as follows:

2. Then open the browser and enter the management address and login password of the router.

3. After logging in to the background, click the setup wizard, and then fill in the corresponding parameters according to the wizard instructions.

<>6. After the wireless setting is completed, click Save, and then restart the router to use it normally.

Click the icon to connect to the network in the lower right corner of the desktop, select Broadband connection, and enter the password in the pop-up window, detailed steps:

1. Method 1: Click the icon to connect to the network in the lower right corner of the desktop and select Broadband Connection.

2. Enter the password of Kazumono in the pop-up window.

3. Method 2: Select Open the control panel of the computer, select Network and Internet.

4. Select the network sharing center in the menu bar and click to open.

5. Select the settings of the adapter in the menu bar.

6. Click on the broadband connection on the new page and enter the password.