How to deal with carbon deposits in automobiles, and how to clean up carbon deposits by automobiles

Cars have carbon deposits, which is inevitable, so how to deal with carbon deposits in cars? Is there any way to clean up carbon deposits yourself?

To be honest, the most effective way to clean up the car's carbon deposits is, of course, to be handed over to a professional repair shop to deal with, and it is almost impossible to clean it up yourself. Due to the structure of the engine itself, carbon deposition is inevitable, but car owners can slow down the formation of carbon deposition by the following methods:

1. Use high-quality fuel. Because the main component of carbon deposits is the wax and gum deposition in the fuel, the lower the gum content in the fuel, the better. We can't change the quality of the fuel, but we can choose not to add cheap fuel from unknown sources.

2. Avoid driving at low speed for a long time, if necessary, you can regularly pull the high speed, the principle of pulling the high speed to eliminate carbon deposition is to speed up the gas flow speed, which can take away a small part of the carbon deposition that is not very firmly attached; The combustion temperature is increased so that a part of the carbon deposits in the cylinder are burned.

3. Add fuel additives to the fuel tank. If regular fuel additives with cleaning effect are used for a long time, then it will also help to clean up carbon deposits. The ** of fuel additives ranges from tens of yuan to more than 100 yuan.

How do professional repair shops deal with car carbon deposits, and there are several ways to clean up car carbon deposits:

1. The car hangs the bottle. A bottle-shaped tool is hung above the engine, and then the detergent is poured into the bottle tool and introduced into the engine through the catheter to clean the carbon deposit. **Around $1000.

If the engine has significant carbon deposits, this can lead to blockage or damage to the three-way catalytic system.

2. Machine wash. The cleaning agent is injected into a machine, and then the machine pressurizes the combustion chamber to let the cleaning agent react with the carbon deposit to dissolve, and then the waste liquid is pumped out. This method has a good effect on some serious carbon deposits, and there is no need to disassemble the engine, but the cost is higher, and the oil needs to be changed after cleaning.

3. Engine disassembly and washing. This method should be the most effective, directly remove the entire engine, and use detergent, ultrasonic and other methods to completely and thoroughly remove the carbon deposits on the parts. However, it can be seen that it takes a lot of time and effort to disassemble and clean the engine, and ** is naturally the most expensive.

The residue of substances in the fuel injector, throttle, oil pipeline, spark plug, cylinder head, inner wall and other parts caused by insufficient combustion of gasoline in the cylinder, and then the black gum produced by the repeated high temperature action of the engine is called carbon deposit.

One of the reasons for carbon deposition is that the fuel is not completely burned and adheres to various parts of the engine, which can form carbon deposits over time. The main function of additives is to drill into the pores of carbon deposits with strong surface activity, destroy their structure, and gradually dissolve these carbon particles from the metal surface, and then discharge them through the exhaust gas after burning with the fuel at high temperature.

The increase in carbon deposits in the car will lead to insufficient combustion of the engine, resulting in an increase in fuel consumption and a long time when the car failure light is on.

Ways to slow down the formation of carbon deposits:

1.Use high-quality fuel. Because the main components of carbon deposits are wax and colloidal deposition in the fuel, the lower the colloidal content in the fuel, the better. But we can't change the quality of the fuel, but we can choose not to add unidentified cheap fuel.

2.Avoid driving at low speeds for long periods of time. If necessary, the high speed can be pulled at a regular time. The principle of removing carbon deposits at a high speed is to speed up the airflow, which can carry away a small amount of carbon deposits that are not firmly attached. The combustion temperature is increased so that part of the carbon deposits in the cylinder are burned.

carbon deposition hazards; If the carbon deposit is not cleaned for a long time, the operation of the whole vehicle will be caused, the internal channel of the engine will be blocked by carbon deposits, the engine power will become worse, and the occurrence of fuel consumption, abnormal engine noise, and unstable idle speed will occur, thereby reducing the power of the automobile engine, increasing fuel consumption, and causing the combustion rate to be too low. If you do not clean up the carbon deposit in time, it will not only cause a certain degree of harm to the car, but also the harm to the environment, modern society pays attention to energy conservation and emission reduction, and exhaust emissions must not exceed the standard, so we should pay attention to this problem.

Usually 5000 kilometers with effective PNF fuel additives to clean the overall oil circuit carbon deposits, a long time not to clean up the carbon deposits will cause the operation of the whole vehicle, so that the internal channel of the engine is blocked by carbon deposits, the internal fuel injection of the car is not smooth, so that the engine power becomes poor, thereby reducing the power of the car engine, increasing fuel consumption, and the combustion rate is too low.

1. The most common is to disassemble the throttle, clean the front and back of the throttle with a carburetor, and dry it with a cotton cloth. Generally, it is recommended to clean the lower throttle for a year or 20,000 kilometers, of course, different models will have different cleaning cycles, we can do it according to the maintenance manual.

2. Carbon deposition cleaning inside the engine, we can do it before we want to change the oil to a new one. Open the oil cap, add detergent, mix with old oil, and idle for about 10 minutes. You can buy the detergent by yourself, the operation is very simple, and you can operate it yourself.

3. To clean the air intake system, buy a bottle of air intake system cleaner, pour it into the liquid storage tank of the special cleaning equipment, connect it to the air intake system, and use the vacuum to suck the detergent into the air intake road to achieve the purpose of cleaning. Cleaning the carbon deposits in the intake system mainly refers to cleaning the carbon deposits inside the intake tract and intake manifold. The purpose is to remove carbon deposits from the intake system, increase intake flow and speed, and reduce engine shake and idle instability.

After the car has been used for a long time, remember to remove carbon deposits.

Carbon deposits can cause insufficient combustion of gasoline and cause the engine to shake. The impact of engine carbon deposition on the car is quite large, first of all, to reduce the engine power, that is, to make the power output uneven and gradually decay, in other words, more and more powerless. The second is to increase fuel consumption and increase your financial burden.

The third is the difficulty of cold start, that is, the difficulty of ignition, it is not easy to get on the car, and finally the carbon deposit in the combustion chamber is strict, and a heavy one will also cause cylinder detonation, and there will be a sound of low-speed acceleration, which will cause damage to the piston and crankshaft, and cause high temperature of the engine, which will seriously affect the safety of the car. Then the emission exceeds the standard, not only can not pass the annual inspection, but also directly aggravate the harm of environmental pollution, solution: replace the good fuel, regularly add fuel additives, such as Marty, Tiger, Dodge, etc. to promote the combustion effect of fuel.

Carbon deposition is the most common "chronic disease" that affects the normal working condition of the engine, and it exists in all parts of the engine. Of course, I believe that when you go to the 4S store for maintenance, you have also been recommended by its after-sales reception for the cleaning project of engine carbon deposits. So, in addition to cleaning up carbon deposits in 4S stores, what good ways can we clean up carbon deposits by ourselves?

Please click Enter a description.

Ways to clean up carbon deposits yourself:

If you want to clean the engine carbon deposits, we recommend you to use additives to clean the carbon deposits. It's a cost-effective way to clean and easy to use, making it perfect for your own use.

Additive cleaning (fuel treasure): additive cleaning is to directly fill the cleaning agent into the fuel tank and mix with the fuel, after the vehicle starts, the cleaning agent will enter the combustion chamber with the fuel, and the cleaning agent will enter the combustion chamber at the same time, the carbon deposits inside the engine will be cleaned to a certain extent.

Please click Enter a description.

About other carbon deposit cleaning methods:

Hanging bottle cleaning: Hanging bottle cleaning is what we usually call no-dismantling cleaning, which is also a cleaning method promoted by 4S stores. In this method, the cleaning agent is sucked into the engine combustion chamber in the form of a hanging bottle from the engine intake duct along with the intake air flow, and in this process, the cleaning agent cleans the carbon deposits in the engine intake duct and combustion chamber.

Disassembly and cleaning: As the name suggests, disassembly and cleaning is to disassemble and clean the parts of the engine that have carbon deposits. Although this method has the best cleaning effect, due to the heavy workload, time-consuming and labor-intensive, generally 4S stores will not provide dismantling and washing services.

How to clean up the best way to clean up carbon deposits in automobiles.

Generally, the commonly used methods are: dismantling and washing, hanging bottle cleaning, and fuel additives.

1. Dismantle and wash. This hole is very direct and rude, but it is generally sent to the 4S store for disassembly, the dismantling of the engine is more complicated, no matter what parts will affect its performance more or less every time it is disassembled, you need to ask a professional master to disassemble. The carbon deposits in the engine can be seen directly when dismantled and washed, and the cleaning will be relatively clean.

However, the cost will be relatively high, and it will also require technology.

2. Hanging bottle cleaning.

This method is also relatively common, when the cleaning agent is discharged into the air intake, the carbon deposit is diluted and softened into a slurry, and then burned and discharged from the cylinder. Generally, the cleaning objects include the intake tract, throttle, intake valve, fuel injector, cylinder inside, etc., but the effect is not as direct and obvious as dismantling and washing.

3. Fuel additives.

The main function of additives is to drill into the pores of carbon deposits with the help of strong surface activity, destroy their structure, and gradually dissolve these carbon particles from the metal surface, and then discharge them through exhaust gas after burning with fuel at high temperatures. Effective fuel additives such as PNF stock solution are non-corrosive, will not clog ternary, and have a relatively high level of safety.

Carbon deposits, as a more common "chronic disease" that jeopardizes the normal working condition of the engine, are present in every part of the engine. Naturally, I firmly believe that everyone who went to the car 4S store for maintenance also highly recommended the new cleaning project of engine carbon deposition after its after-sales service. So, in addition to the removal of carbon deposits in car 4S stores, what good way can we remove carbon deposits by ourselves?

Self-removal of carbon deposits:

If car buyers want to clean the carbon deposits of the engine by themselves, we suggest that we use the method of adding cleaning. This type of cleaning method is cost-effective and easy to use, making it particularly suitable for your application.

Additive cleaning (fuel additives): additive cleaning is to immediately fill the cleaning agent into the diesel fuel tank and mix with gasoline and diesel, after the car starts, the cleaning agent will enter the combustion chamber along with the gasoline and diesel, and at the same time when the cleaning agent enters the combustion chamber, it will carry out a certain degree of cleaning of the carbon deposits in the engine part.

For other carbon deposition cleaning methods:

Infusion Mingwang silver bottle cleaning: Infusion bottle cleaning is what we usually call non-dismantling cleaning, which is also a cleaning method recommended by automobile 4S shops at this stage. In this method, the cleaning agent is sucked into the engine combustion chamber from the engine inlet along with the air intake cyclone according to the infusion bottle, and in this link, the cleaning agent will clean the carbon deposits in the engine air intake system and its combustion chamber.

Disassembly and cleaning: To put it bluntly, disassembly and cleaning is to clean the position where the engine has carbon deposits. Although the actual effect of this kind of cleaning is the best, because of the large amount of labor and laborious time, it is impossible for the general automobile 4S shop to give disassembly services.

Millions of car purchase banquet subsidies.

There are three main ways for cars to clean up carbon deposits by themselves: First, use high-quality fuel. The second is to avoid long-term low speed driving, if necessary, you can regularly pull the high speed, the principle of pulling the high speed to eliminate carbon deposition is to speed up the gas flow speed, can take away a small part of the carbon deposits that are not very firmly attached, increase the combustion temperature, so that a part of the carbon deposits in the cylinder are burned.

The third is to add fuel additives to the fuel tank. Long-term use of regular fuel additives with cleaning effect can also help to clean up carbon deposits.

Carbon deposits, as the most common "chronic disease" that affects the normal working condition of the engine, exist in all parts of the engine. Of course, I believe that when you go to the 4S shop for maintenance, there are also after-sales receptionists who recommend you to clean the engine carbon deposits. So, in addition to cleaning up the carbon deposits in the 4S store, what other good ways can we clean up the carbon deposits ourselves?

Clean up the carbon deposits yourself:

If you want to clean the engine slag tung slip carbon by yourself, we recommend that you use additives to clean it. This cleaning method is inexpensive, easy to operate, and perfect for self-use.

Additive Cleaning (Fuel Treasure): Additive cleaning wheel mu refers to the injection of cleaning agent directly into the fuel tank and mixing with the fuel. After the vehicle is started, the cleaning agent enters the combustion chamber along with the fuel, and the carbon deposits inside the engine are cleaned up to a certain extent.

Other carbon deposition cleaning methods:

Bottle washing: Bottle washing is what we usually call disassembly-free cleaning, which is also a cleaning method promoted by 4S stores. In this way, the cleaner is drawn into the engine combustion chamber in the form of a bottle along with the intake air flow from the engine intake duct, and in this process, the detergent will clean the carbon deposits in the engine intake duct and combustion chamber.

Cleaning: As the name suggests, cleaning is the removal of carbon deposits from parts of the engine for cleaning. Although this method has the best cleaning effect, due to the heavy workload, time-consuming and labor-intensive, generally 4S stores will not provide dismantling and cleaning services.

Pacific Automotive Network.

Millions of car purchase subsidies.