There is no sound from the microphone of the computer First, the newly bought microphone, first make

There is a setting in the microphone properties to turn on listening,XP I forgot,Because I've been using win7 for a long time,Take win7 as an example:

Control Panel=>Sound=> Recording tab=>Microphone Properties=> Listen tab to check this device. In this way, when you use the microphone, the speaker will also output your singing voice.

XP: You look into it again, anyway, if you find Mike's properties in the control panel, you should be able to find and turn on that function.

There is no sound from the microphone of the computer First, the newly bought microphone, first make sure that the microphone is good!

Buy a voice recorder, there are still a lot of brands, **hundreds to thousands. Our unit has a lot of meetings, and I'm in charge of organizing the minutes, so I often use this thing. Considering the problem of carrying it with me often, I bought a miniature voice recorder on the Internet, **380 yuan, 8G large memory, high-speed storage is not a problem.

The high-sensitivity microphone can clearly record the sound within 15 square meters, and you can also take pictures of the data, which are very clear. Overall, I'm quite satisfied. 99

You haven't set the settings in the Kuwo K song.,You set it again.。

If you don't understand the situation, it's hard to say, it's better to have someone show you in person.

You can check it from the following aspects:

1. Is the jack plugged incorrectly?

2. Is the microphone turned on in the sound card software?

Generally, when you buy a new computer or a computer that has just made a system, the microphone is turned off by default, and you can turn it on in the following two ways:

Method 1: Double-click the "Speaker" button in the lower right corner of the screen, the "Master Volume" dialog box will pop up, see if there is a microphone, if so, click the check mark in front of "Mute"; If not, you can click "Options" in the upper left, select "Properties" will pop up a dialog box, click the box in front of "Microphone", and then press the "OK" button, so that it will automatically return to the "Master Volume" dialog box, you can see "Microphone", remove the check mark in front, you can turn on the microphone, when you chat with others, talk to the microphone, and people can hear the sound.

Method 2: If you have installed the corresponding sound card driver, such as AD1986A, you can choose the lower left corner - Start - Control Panel - SoundMax (double click the icon), the sound card software settings interface will pop up, as shown below, you can click the red button under the "Microphone", and it will turn blue after clicking, which means that the microphone is turned on.

You probably didn't turn on the microphone, so you can't hear your own microphone in the headphones.

Double-click the gray speaker in the lower right corner of the computer, a dialog box will pop up, find the microphone, check it, if the sound is low, turn it up, and turn on the microphone.

If you can't find the microphone option, click on the upper left of the dialog box, Options, Properties, find the microphone, check it, OK, and then go to the microphone to open.

If there is no Microphone Boost option, click on the top left of the dialog box, Options, Advanced Controls, tick, then find the Microphone Volume Adjustment, click Advanced, and check Microphone Boost or Mic Boost

According to the figure below, find the microphone volume in the upper row, or "rear pink in" (when the microphone is plugged in) "front pink in", all are turned on, it is recommended that the microphone be plugged in the back, the sound is stable and clear. Non-original.

In the system audio settings, the system is muted by default.

Open the [Start] menu of Telemarketing Brain, select [Settings] - [System] - [Sound] - [Sound Control Panel] - [Recording], if the microphone is disabled, right-click and select [Enable] the spine height; You can also double-click [Microphone] to switch to [Level] and adjust the microphone volume.

The small speaker icon in the lower right corner of the screen, right health attributes. Go in and find the output device, find the one that is in the same format as your microphone. Just find it and hook it. If you don't, add a driver.

If the above enthusiasts can't solve the problem, check if your headset has a toggleable non-volume switch. My headphones are like this, one is off, the other is on, and only when the state is turned on can the other party hear what I say.

It mainly has to do with your sound card driver.

It is recommended to try a different driver.

Sometimes the latest drivers are installed.

Instead, the sound is quiet.

1. First of all, confirm whether there is a problem with the microphone, and try it on other computers that are fine.

2. If there is a sound output (try to hear whether the song has a sound), it should be no problem to drive.

3. If there is no sound output, reinstall the driver, the general system disc has a universal driver, of course, the most basic thing you have to figure out, is your microphone connector plugged in the wrong position? Is the microphone volume on?

Personal long-term experience in using computers.

The light is that the plug is not plugged in well or the audio driver and the like, the medium is the damage to the sound card chip or components, (the independent sound card is done), and the heavy is the damage to the south bridge.

That's all there is to it.

Generally, the brain can be restarted. Or make sure your wheat isn't bad. If you use QQ, just log out and try again.

Two aspects: the sound card driver and the microphone switch!!

You can follow the following tips, I hope mine is helpful to you!

Solution]:

Solution 1: Confirm whether the microphone jack is connected correctly, generally headphones with microphones have two sets of wiring plugs, one is a green plug (that is, the audio signal of the headphone), and the other is a red plug (that is, the microphone signal input); First, make sure that the red plug should be connected to the red jack corresponding to the computer panel (usually there will be headphones and microphone icons). (Figure 1).

Figure 1 Option 2:

Figure 3 shows how to install the driver

Figure 5 Option 3:

Right-click the volume icon in the lower right corner of the taskbar—select [Turn on Volume Control]—[Options]—[Properties]—[Properties] dialog box [Show all items below the following volume controls] with a checkmark, click [OK]—check if there are any items in the [Volume Control] window, remove the checkmark in front of mute below all items, adjust the volume of all items to the maximum, and then try to chat with the other person's language. (Figure 6).

Figure 6 Option IV:

Adjust the QQ language settings, open the QQ panel - click the gear icon (system settings) at the bottom - click [Friends and Chat] in the system settings window - [Language**] - click [Language Settings] in the right window - remove the tick in front of [Automatically adjust microphone volume] in the pop-up [Voice**] window, and then increase the volume of the microphone icon to the maximum - then put a tick in front of [Auto Amplify Microphone Volume] - before trying to make a voice call. (Figure 7).

Figure 7 Option V:

If the above steps can't solve the problem that the microphone can't speak, please click [Start] - [All Programs] - Mouse point to [Accessories] - [Entertainment] - [Audio Recorder] - After opening the [Audio Recorder] window, click the circular recording button to start recording, speak into the microphone, see if the waveform changes, wait until the recording is completed, click the ** button, listen to whether there is any sound, if there is no sound, it is very likely that the microphone has been damaged. Figure 8

Try a different microphone, and if there is still no sound, then reinstall the sound card driver.