It s not unusual for the wipers to suddenly stop moving

You can refer to the following methods to check the problem.

Open the lead cover to see if the drive link is out of place (this is the most common cause).

Check that the fuse is in good condition.

Disassemble the motor cord plug to turn on the power supply, and use a multimeter to measure whether there is voltage.

If the fuse is intact and the motor has no voltage, check whether the circuit and turn signal combination switch is intact.

Generally, the motor will have a burnt smell when it burns out.

If you turn on the power supply and measure the normal voltage at the wiper motor, you can consider that the motor is broken.

Pay attention to whether the pole is connected to the wiper rocker arm in the correct way. Some of the arms are screwed to the rocker arm, while others are locked with a buckle.

Pull the wiper up and touch it with your finger to check for damage to the cleaned rubber wiper and the elasticity of the rubber blades. If the blades are aged, hardened, or cracked, then the wiper is broken.

During the test, the wiper switch is placed at various speed positions to check whether the wiper maintains a certain speed at different speeds. Especially in the intermittent working state, it is also necessary to pay attention to whether the wiper maintains a certain speed when it is in motion.

Check the wiper status and whether the wiper rod has uneven swing or leakage. If the following three situations occur, it means that the wiper is unqualified: first, the swing is not smooth, and the wiper is not beating normally; Second, the contact surface of the rubber and the glass surface cannot be completely fitted, resulting in wiping residue; Third, after wiping, the glass surface presents a water film state, and fine stripes, fog and linear residues are produced on the glass.

During the test, attention should be paid to whether there is abnormal noise in the motor, especially when the wiper motor is humming and does not rotate. This indicates that the mechanical transmission part of the wiper is rusted or stuck, and the wiper switch should be turned off immediately to prevent the motor from being burned.

Generally, family car wipers are equipped with standard, fast and slow three gears, which can be adjusted, generally on the right side of the steering wheel. There may be some differences between models.

The manual wiper adjustment method is as follows:

Light rainfall: Don't rush to use wipers when it starts to rain lightly. Spray glass water to moisten the glass before opening it for the first time to avoid dry scraping of the glass window due to lack of moisture.

Heavy rainfall: If the rain is heavy, adjust the working frequency of the wiper in time to ensure a clear vision. If the rain is too heavy and the rain is too urgent, and you still can't see clearly when you drive to the highest gear, it is recommended to find a safe place to stop temporarily and wait for the rain to lighten, and remember to turn on the fog lights and double flashes when parking on the side of the road to avoid accidents.

Use rear window wipers: If your car has a rear wiper, don't forget to turn it on when it rains.

Generally, SUVs, hatchbacks, MPVs and other models are mostly equipped with rear wipers, this is because the rear windshield of the sedan has air flow through, while the hatchback or SUV does not, which leads to the fact that once there is rain, the sedan can use the air flow to blow down the water droplets, but the hatchback cannot, the water can not be blown off in time, it will be easy to stick to the dust, affect the sight of the rearview mirror, and lead to unsafe driving.

Hope, thank you.

1.It is possible that the wiper fuse has blown out.

2.If the wiper doesn't move, it may be that the electrical appliance is burned.

3.Or maybe the wiper switch is broken. The wiper may not move because the fuse is broken, so the wiper can't move, so you have to open it to take a look, if so, just replace it.

4.Wipers are more common in our lives, we need to use wipers on rainy days, and we also need wipers when cleaning windshields. Wipers are very important for cars, so when there is any problem with the wipers, we need to repair them in time.

If there is a problem with the wipers, we have to go to the car repair shop in time to repair it.

How to maintain a family car?

1.Change your car's oil and filters regularly.

2.Keep an eye out for the unusual noise of your car at all times.

3.Replace the air cleaner regularly. Nowadays, almost every household has a car, and people almost all need to use a car to get around. Cars are very important to us, so we need to regularly maintain and overhaul the car to delay the life of the car.

If you find that there is a problem with the car, quickly repair it, if you find that a certain part of the car is abnormal or there is an abnormal sound when you are driving, you should go to the car repair shop to check it. Avoid unnecessary surprises.

The following aspects need to be checked when the wiper is not moving:

1. Check the wiper blades.

Usually do not pay attention to the maintenance of car wiper blades, rainy days found that it has been seriously damaged, can not work normally, timely replacement of a pair of wiper blades.

2. Check the wiper motor.

After opening the car cover, you can see the wiper motor, you can touch the wiper motor with your hands, if you feel hot, it means that the motor is short circuited inside, and replacing the motor can solve the problem.

3. Check the wiper linkage.

There are many connected places in the wiper link, and if there is a problem in these places, the wiper cannot work properly, and you can judge whether it is a side rod failure by looking at the operation of the wiper.

4. Check the wiper fuse.

In order to protect the car line, each electrical equipment is equipped with a fuse, if the wiper can not work, you can check whether the wiper insurance is blown, and you can replace the fused with the spare insurance on the car.

5. Check the wiper switch.

Although the wiper switch is not often used, the automotive electrical appliance itself is unstable, so when the above inspection is not found, it is necessary to consider that there may be a problem with the wiper switch, and the multimeter can be used to measure the quality of the switch, or it can be directly replaced with a new one to test.

6. Check the wiper line.

Checking the wiring is a complicated and time-consuming matter, and it is necessary to be able to skillfully use the car multimeter, which will measure voltage, resistance, and current, and be able to combine it with reality to find out the fault point of the line that causes the wiper not to work.

The following aspects need to be checked when the wiper is not moving:

1. Check the wiper blade usually do not pay attention to the maintenance of the car wiper blade, and find that it has been seriously damaged and cannot work normally on rainy days.

2. Check the wiper motor and open the car cover to see the wiper motor, you can touch the wiper motor with your hands, if you feel hot, it means that the motor is short-circuited inside, and replacing the motor can solve the problem.

3. Check the wiper connecting rod The wiper connecting rod has many connected places, and if there is a problem in these places, the wiper cannot work properly, and you can judge whether it is a side rod fault by looking at the operation of the wiper.

4. Check the wiper Kaisan fuse In order to protect the car line, each electrical equipment is equipped with a fuse, if the wiper can not work, you can check whether the wiper insurance is fused, and the fused insurance can be replaced with the spare insurance on the car.

5. Check that although the wiper switch is not often used, the automotive electrical appliance itself is unstable, so when the above inspection is not found, it is necessary to consider that there may be problems with the wiper switch, and you can use a multimeter to measure the quality of the switch, or you can directly replace it with a new one to test.