Table tennis, positive glue? How to play table tennis glue?

1. The backhand position is the backhand and the forehand is connected to the right topspin short ball.

1. Rub the backhand and skim the short ball with the right topspin with the forehand.

Key points: Rub the right side of the upper rotation, the shape of the racket should be slightly upright, and good hand control is required. At the moment of touching the ball, it is necessary to take the initiative to rub from slow to fast, from light to heavy.

1) When there is more side spin and less topspin on the ball, for side spin, the backhand diagonal line is a reverse connection. When rolling a straight line, don't move too far to the left to overcome the side rotation and prevent it from going out of bounds from the left sideline.

2) When there is less side spin and more topspin on the ball, the main attention should be paid to overcoming the topspin and the racket shape should be a little more upright. Rubbing topspin is a forward transfer method, pay attention to active acceleration to change the direction of the ball's movement.

3) When rubbing the sideways forehand, from the upper right to the lower left, actively exert force to rub to change the axis of rotation, and the return ball becomes a left-hand downspin ball.

2. Backhand picking, bounce, and push (dial) to catch the right topspin short ball.

Key points: The racket shape should be slightly leaned forward, touch the middle and upper part of the ball, hit the main thing, and take the initiative to exert more force forward.

1) When the ball has more side spin and less topspin, when the backhand picks, bounces, pushes (dials) the diagonal line, it is a strong rotation area of side spin, and it is necessary to pay attention to the active force to hit a little more to overcome the rotation.

2) When the side spin is less and the topspin is more, the main attention is to control the topspin, hit a little more, lean forward a little more, and give the main force forward.

3. Screw the right upspin short ball on the backhand side.

1) When there is more side spin and less topspin on the ball, it is a reverse connection method for side spin, pay attention to active force friction.

2) When there is less side spin and more topspin, it is a reversal connection for topspin. Be careful to control the angle of the face and tilt forward a little more to overcome the topspin and depress the arc.

2. Forehand (and middle) forehand with the right topspin short ball.

1. Forehand rubbing (skimming) to catch the right side of the forehand topspin short ball.

1) When there is more side spin and less topspin for the ball, for side spin, rubbing (skimming) is the method of avoiding transfer, and it is necessary to actively change the axis of rotation. Rub (skimm) the diagonal line and make sure that the paddle face is not too left, so as to overcome the right side of the rotation.

2) When there is less side spin and more topspin on the ball, for topspin, rubbing is a smooth rotation connection. Pay attention to the acceleration friction and make the beat a little more upright to overcome the topspin.

2. Pick the forehand to pick up the short ball with topspin on the right side of the forehand.

1) When there is more side spin and less topspin on the ball, the slash line is the avoidance transfer method. Take care to control the direction of the slash line and not too left.

2) When the side spin is less and the top spin is more, the racket shape should be slightly leaned forward, and the forward impact should be the mainstay, and the strength of the force should be a little smaller.

Lift it directly over, and the granular glue is generally downspined, begging.

The formula for playing table tennis is as follows:

1. First of all, it is necessary to control its backhand with the curve ball, and the return ball is short, so as not to let the opponent only dismiss it easily; The serve is dominated by short balls, plus sneak attacks on the opponent's forehand.

2. The positive rubber is mainly based on the impact of force, the main finger is to grab the point, if you want to deal with the positive glue, it is best to practice the ball rubbing, especially the ball with the next spin, the positive rubber is difficult to get started.

3. Then the hair is long and fast, and the opponent's serve must not be rubbed, it is best to push or dial a board, and the fast belt can also be used, and the bridge liquid racket shape should be leaned forward.

4. It should be noted that the positive glue to the ball is not very turning, and the topspin ball is a little heavy.

5. The biggest feature of Zhengjiao is that the attack and push speed are relatively fast, and it sinks slightly, and the ball is easy to return to the net. However, the ability of orthoglue to manufacture rotation is average. Therefore, the correction rubber ball should be paid attention to suppressing its speed.

The difference between long glue and raw rubber is:

1. Long glue

The length of the particles of the long rubber can generally reach more than millimeters, the main feature of the long rubber rubber is that the elasticity is particularly good, which leads to the sinking of the long rubber back to the ball, erratic, often there will be abnormal rotation phenomenon, often use knock, arch and other ways to play, many people turn the long rubber into a strange glue, before Deng Yaping is a long rubber play, now the grandmother Ni Xialian is also a long glue, there are no other professional players.

The core of the long rubber style of play is to make the opponent miss. With the help of the opponent's force, the trajectory sinks or the trajectory is erratic after returning the ball, and many amateurs lose the game by making continuous mistakes against the long rubber.

2. Positive glue

The positive rubber is a short-grain rubber, the particles are outward, and the length of the rubber particles is basically equal to its diameter. The biggest advantage of positive rubber is that it is not afraid of spinning, has good elasticity and is stable in hitting. It is one of the rubber commonly used by straight fast-break athletes, and it must be fast if you want to give full play to the advantages of positive rubber.

The core tactic of the positive rubber play is to play a board, either through the serve, or through the other side of the reverse to find an opportunity to pull a board, or through various transitions, find an opportunity to play a forehand to end the battle. Liu Guoliang is a representative of this style of play, and in the later period, the International Table Tennis Federation did not allow the serve to be blocked, and used the big ball to slow down the tempo, which also led to Liu Guoliang not being in his peak when he retired.

3. Raw rubber

The content of colloidal particles in raw rubber is larger than that of positive rubber, and the colloidal particles are softer and more elastic. The characteristic of raw rubber is that the ball is out quickly, and the ball that is hit out sinks faster than the ball hit by other rubber. Due to the small friction, the ball that is returned to the past does not turn the ball, and it is a little fluttering, which is not conducive to the opponent's attack.

Raw rubber play needs to enter the most ruthless fight rotation, at present, Ito Misei is a forehand backhand rubber, generally speaking, forehand raw rubber through a large power smash to end the game, or backhand raw rubber pulled out of the return ball without turning to find a chance to smash, in addition to raw rubber is easier to control the ball than long rubber, backhand bounce is also an important means of scoring. The raw rubber players are simply decisive and take the initiative to control the pace of the game.

The positive rubber is characterized by strong spin force, stable hitting and easy control, and is suitable for arc circle type or arc circle combined with fast attack type play. It is also the preferred type for beginners due to its stable hitting and good ball control. For professional players, there are a variety of anti-rubber sponge rackets with different properties for late touching, such as strong adhesive rubber and soft and thick supporting sponges, so they have good characteristics of "biting" the ball and "wrapping" the ball.

Long glue is a type of glue that is covered with a thin and long rubber skin on top of a thin sponge, while the rubber sponge is rubber. Invented in the sixties. Back then, Zhang Xielin used the rubber of laughing scum Li to cut out unpredictable balls, and was known as a table tennis magician.

This is because this kind of rubber ball will produce abnormal rotation phenomenon on the paddle surface, and the typical change is: when the opponent rubs the downspin ball, when you rub it with a long rubber, the upper spin will fly back; The opponent's topspin ball, your own side pushes the block with a long rubber and then flies back with the downspin; The ball will spin more when hitting the opponent's curved ball with a chipping ball, while the ball will not spin when the ball is pulled back. These anomalous changes often make the opponent miss or return the high ball, which can often be easily won against someone who is not familiar with the performance of long rubber.

How to deal with positive rubber players in table tennis games:

1. Control its backhand mainly with the arc ball, and swing the serve short, so that the opponent does not get started easily;

2. The serve is mainly short balls, plus sneak attacks on the opponent's forehand;

3. The positive glue is mainly based on the late grip finger force impact, mainly to grab the point, to deal with the positive glue, you need to practice the ball well, especially with the addition of the downward spin ball, the positive glue is difficult to get started;

4. The hair is long and fast, and the opponent's serve must not be rubbed, and the code is used to push or dial back a board, and the racket shape should be leaned forward;

5. The positive glue to the ball is not very turning, and the topspin ball is a little heavy;

6. Pay attention to suppressing its speed, control the rhythm of your own play, don't follow the opponent, do all the action, and play the rotation and power of the ball.

Table tennis rackets. The differences between positive glue and reverse glue are:

1. The direction of the rubber particles is different.

The glue particles are facing outward, and the smooth surface is bonded to the racket. Reverse glue, on the other hand, is bonded to the racket with the rubber particles facing inward, while the glossy side is facing outwards for hitting the ball.

2. The characteristics are different.

Because the gel content of the colloid is small, the particles are hard, lack of viscosity and wrapping, and friction.

It is not as good as reverse glue, but positive rubber is characterized by good elasticity and stable hitting. Due to the very soft surface gum and the large stickiness to the ball, the reverse glue can also be understood as a large friction, strong rotation force and easy to control.

3. The style of suitable players is different.

Because of its elasticity and stable hitting, it is very suitable for players who like to break straight and fast, and when the ball lands on the highest point of the table, it is the favorite hitting position of the positive rubber racket.

The reverse glue is more suitable for players who like the arc type or the arc circle combined with the fast attack. Combining the need for spin and speed, the reverse glue is very popular with professional players and is also very beginner-friendly.

The direction of the colloidal particles is different. The positive rubber particles are facing outward, and the reverse rubber particles are facing inward.

The characteristics are different. The positive rubber is characterized by good elasticity and stable hitting. The anti-rubber friction is large, the batting rotation force is strong, and it is easy to control.

The style of the player is different. Positive glue is suitable for players who like straight board fast attack, and reverse glue is more suitable for players who like arc circle type or arc circle combined with fast attack.

Talk about sports with each other.

The positive rubber particles are upward, and the height and diameter are equal; The raw rubber particles are upwards and larger in diameter than in height. The positive rubber is characterized by good elasticity, stable hitting and fast speed; The reverse rubber shot has a sinking, and the ball spin is weak. Positive glue is suitable for players who are fast attacking near the table; The anti-glue is suitable for players on the near stage.

Positive rubber is also called short particle rubber, which is characterized by good elasticity, fast speed, stable hitting, and no eating and spinning ball, which is suitable for fast attack near the table!

The anti-rubber is characterized by strong spin force, stable hitting and easy control, and is suitable for arc circle type or arc circle combined with fast attack type play.

The positive and reverse glue used on the surface of the table tennis racket have different playing methods. The difference is mainly reflected in the rubber attachment method, racket performance, racket playing method and rubber maintenance four aspects:

1. The difference in rubber attachment methods;

Positive glue belongs to granular glue, and the particles are used with a sponge in the form of positive glue facing outward; Reverse glue, on the other hand, binds the sponge inward in the form of rubber particles, while the ITTF stipulates that granular glue (positive glue) can also be used.

No need to stick a sponge, directly stick it to the bottom plate; A reverse label must be applied to use the sponge. Positive glue particles are in front.

2. Differences in the performance characteristics of rackets:

The positive rubber is slightly hard, the elasticity is good, the ball is fast to take off the plate, the friction is much lower than that of the reverse glue, and it is not easy to rotate; When the reverse glue is slightly soft, the surface friction is strong and it is easy to rotate. The surface of the reverse side glue is divided into two types of rubber: viscous and shrinkage. The sticky surface is more viscous and can make the ball spin more intensely; The shrinkage viscosity is low, which reduces the rotational speed of the ball but improves its elasticity.

3. The difference between the playing style of the racket and the suitability:

Because the rubber is very elastic, the ball falls off quickly when it touches the ball, especially under the support of the sponge, the elasticity of the club is greatly increased, which is very aggressive and suitable for quick attack play.

When the reverse glue contacts the ball, the surface contact area increases, and the surface of the club becomes sticky, which greatly increases the friction and is easy to produce balls with different rotation characteristics.

4. The difference in rubber life:

The positive glue has a long service life, and the racket does not need to be replaced frequently, which is easy to maintain. Racquet surfaces do not need to be wiped down and cleaned every day or every game. Cleaning once a week is sufficient. Just brush off the dust and dirt between the particles.

Raw rubber vs. long rubber

The first difference between raw rubber and long rubber is that in terms of material, the particle height of long rubber is higher than that of raw rubber. The degree of vulcanization of raw rubber is low. The second difference is performance. The rotational force of raw rubber and long rubber is different, and the elastic beating speed of raw rubber is also faster than that of long rubber.

The rotational capacity of raw rubber and long rubber decreases sequentially. In addition, the long glue has reverse rotation performance, which is simply to rub off the upper rotation and lower rotation.

In terms of speed, raw rubber is the fastest, while long rubber is relatively poor. The reason is that the long gum particles are long and will fall when they touch the ball, and the potential energy of the ball is partially converted into the potential energy required for the colloidal particles to fall, resulting in poor elasticity of the long gum. The particle size of raw rubber is short, so there is no such problem.