How to adjust the refrigeration of BC D 520w CHU 1 Haier refrigerator?

The Haier BCD-226SLN refrigerator produced by Qingdao Haier Co., Ltd. is an example

1. On the operation interface of the refrigerator, we can see the area that displays the temperature, which are the cold room, the variable temperature room, and the cold ice room. As shown in the figure below:

2. For the refrigerator, variable temperature room and freezer room of the refrigerator, the temperature adjustment method is the same. For example, when setting the temperature adjustment of the refrigerator, we only need to stop our fingers on the button of the temperature adjustment of the refrigerator and press it to the desired temperature. As shown in the figure below:

3. The second button above is the freeze adjustment button. The temperature of the freezer is regulated in the same way as the refrigerator. However, the temperature of the variable greenhouse varies between -16 and -22. The adjustment effect is shown in the figure below

4. When the temperature adjustment display of the refrigerator is completed, the automatic display program of the control system will start, and the indicator light will automatically go out after a while. As for variable temperature regulation and artificial intelligence, the method is the same. You can simply set it up to your liking.

Summary. Hello, Haier BCD-251WDGW refrigerator is a computerized temperature control system, and the temperature adjustment method is as follows:

1.In the unlocked state, click the "Temperature Zone Selection" button to select the adjustment status to the refrigerated temperature zone.

2.At this time, the "Refrigeration Temperature Zone" icon lights up, and the temperature display area shows the set temperature of the original refrigerator room, and enters the refrigerator room.

Temperature setting status.

3.Click on the temperature display area. With each click, the set temperature is minus 1. You can also slide the temperature display area up and down, toward.

When sliding up, add 1 to the set temperature. When sliding down, the temperature is minus 1.

4.The temperature of the freezer zone is set in the same way, and after setting, no need to check it, and the setting is automatically saved after 3 seconds. Hope it helps.

How to adjust the temperature of Haier refrigerator BCD-251WDGW.

Hello, Haier BCD-251WDGW refrigerator is a computerized temperature control system, and the temperature adjustment method is as follows:1In the unlocked state, click the "Temperature Zone Selection" button to select the adjustment status of the refrigeration and cooling zone.

2.At this time, the "Refrigeration Temperature Zone" icon lights up, and the temperature display area displays the original refrigerated room set temperature, and enters the refrigerated room temperature setting state. 3.

Click on the temperature display and the chaotic display area. With each click, the set temperature is minus 1. You can also slide the temperature display area up and down, and when you slide up, the set temperature is increased by 1.

When sliding down, the temperature is set in the same way as the freezer zone, and after setting, there is no need to confirm it, and the setting is automatically saved after 3 seconds. Hope it helps.

The smart display sometimes becomes frozen, and after the plug is unplugged for a period of time, it is normal again, and it is not something hot that is put in.

The display screen is normally 5 degrees, and after a period of time, the display screen has no temperature display, and it has become a freezer, and the dishes in it are broken.

No, it's like it's good after the plug is pulled out for a while, and after a few days, the display has no temperature display, showing an L symbol, I don't know what it means.

The problem is with the thermostat. Because the temperature of the freezer has dropped to the limit of the refrigeration system, the refrigerant can only take away the heat in the refrigeration room, thus causing the temperature of the refrigeration room to be too low, and the above problems will occur. It is recommended to send it for repair or turn off the power immediately, otherwise prolonged operation may lead to compressor failure.

The refrigerator display L means that the motor is now in a low-energy operating state.

So how to deal with it.

In other words, you don't need to use much electricity to have air conditioning.

It is better to find someone to repair it.

The food I bought felt soaked and I couldn't eat it.

But you can eat it. But it is recommended not to eat it. Because it's frozen, it's not very good to ask.

Taste ha. It didn't taste that good.

Haier refrigerators are divided into two types: intelligent and mechanical, and the two types have different ways of adjusting the temperature, and the following are the specific operation steps for the temperature adjustment of the two types of Haier refrigerators:

1. Haier smart refrigerator temperature adjustment method:

1.Press the "Smart" button on the control panel of the refrigerator, the icon E lights up, press the "Smart" button again to exit the smart function state;

2.Press the "Refrigeration" button to display the current refrigerator temperature, press the "Refrigeration" button again to lower the refrigerator temperature, and reduce the refrigerator compartment temperature by 1 each time;

3.Press the "Freezing" button to display the current freezer temperature, press the "Freezing" button again to lower the temperature of the refrigerator, and reduce the temperature of the refrigerator room by 1 each time;

4.After 5 seconds of operation, there is no button, that is, the temperature adjustment of the refrigerator freezer is completed.

The operation method of temperature adjustment of different models is subject to the manual).

2. Haier mechanical refrigerator temperature adjustment method:

The temperature regulation of Haier's mechanical refrigerators requires manual operation. Open the refrigerator, and there will be a disc-shaped knob switch marked with a scale next to the light on the right wall of the refrigerator, and the temperature adjustment of the Haier refrigerator can be completed by rotating the knob.

The scale on the knob is divided into 8 gears from 0 7 (0 6 in some refrigerators), "0" means not working, and the higher the number in the future, the stronger the refrigeration and the lower the temperature. The temperature of the first gear is about 9 10, the temperature of the second gear is about 8, the temperature of the third gear is around 6 7, the temperature of the fourth gear is about 5, the temperature of the 5th gear is about 4, the temperature of the 6th gear is about 3, and the temperature of the 7th gear is about 2.

Generally, spring and autumn are set to 3 or 4 gears; Set to 1 3 gears in summer; In winter, it is set to 4 5 gears (should be subject to actual demand).

Summary. Hello, dear. Hello, temperature adjustment can be done by the following operations:

First of all, find the unlock button on the LED display, just outside the hidden door. Then, press and hold the unlock button for more than 3 seconds, you can see the temperature number on the display start flashing, and then you can adjust the temperature.

Note: The display board of the touch screen has a touch area, so if you press the temperature indication and the number does not change, it may be that the position of the press is wrong.

How to adjust the temperature of Haier refrigerator BCD-251WBCY.

Hello, dear. Hello, the temperature adjustment can be operated by the following operations: First, find the unlock orange sail finger key on the LED display, just outside the hidden door.

Then, press and hold the unlock button for more than 3 seconds, and you can see the temperature number on the display start to flash, and then you can adjust the temperature. Note: The display plate of the touch screen has a touch area, so if you press the temperature indication and the number does not change, it may be that the position of the press is wrong.

Thank you.

1. The first thing you need is to open the refrigerator compartment of the refrigerator.

2. There is a disc to adjust the temperature next to the light in the refrigerator.

3. The larger the number on the disc, the stronger the refrigeration and the lower the temperature.

4. Turn the knob of the disc to adjust the temperature.

You can send me a private message, I am after-sales, if it is a computer intelligent touch type, it is very simple, you can also call the manufacturer 400**, no money,