What are the types of plates? What are the types of plates?

It is usually made into a flat, rectangular building material board of standard size and is used as a component of walls, ceilings or floors. It also refers to a metal sheet that has been wrought, rolled or cast. It is divided into thin plates, medium plates, thick plates, extra-thick plates, and flat rectangular building material plates that are usually made into standard sizes.

According to the classification of materials, the board can be divided into two categories: solid wood board and wood-based board; According to the molding classification, it can be divided into solid board, plywood, fiberboard, decorative panel, fireproof board, particle board and so on. First, the MDF industry is called blockboard, it is made of two pieces of veneer in the middle of the sticky splicing, the large core board is cheaper than the fine core board, the bending strength is poor, but the transverse bending strength is higher. Plate Specifications:

2440mm*1220mm, according to the thickness is generally a centimeter plate.

3. Particleboard is a melamine-impregnated adhesive film paper veneer wood-based board. It is a decorative board made by soaking paper with different colors or textures in melamine resin adhesive, then drying to a certain degree of curing, laying it on the surface of particleboard, MDF or hard fiberboard, and pressing it. Plate Specifications:

2440mm*1220mm Fifth, gypsum board is commonly known as fine core board, which is made of three or more layers of 1mm thick veneer or thin board glue hot pressing. It is currently the most commonly used material in handmade furniture. Plate Specifications:

There are six types: 3mm, 5mm, 9mm, 12mm, 15mm, and 18mm.

7. The decorative panel is made of siliceous material or calcareous material as the main raw material, mixed with a certain proportion of fiber material, light orthopedics, adhesives and chemical additives, and made of decorative board by autoclaving technology. Plate specifications: the thickness is generally and.

1. Solid wood: There are many kinds of wood in solid wood 2. Woodworking boards: there is a kind of paint-free woodworking board 3

That is, the compression board, which can be made into paint-free 4, moisture-proof board: can also be made paint-free 5, ecological board: can also be made into paint-free recommendation of the second type.

Classification of paint-free board 1, high-density paint-free boardHigh-density paint-free board has a low price, it uses 3mm dense board as the base material, and is decorated with a layer of blister film. If you do it by hand, the durability is okay, but you need to be extra careful when doing right-angle bends. 2. Foamed paint-free board Foamed paint-free board has a higher price and good elasticity, it is based on a thick foaming material and is decorated with a layer of paint-free film.

It is easier to workmanship, but the surface layer is softer, so you should be careful when using the finished product. 3. The price of polymer paint-free board is very high, about 2 thick, and its matrix and surface decoration are a kind of polymer material. The products made have good effects and high grades, but the cost of workmanship and materials is high.

4. Other paint-free materials: fireproof board, Boeing soft sheet. Fireproof board is cheap, friction-resistant, easy to clean, and is generally used in shoe cabinets and cabinets; Boeing soft foil is easy to use and can be used inside the wardrobe.

There are eight types of plates that are commonly used.

1. Solid wood board

Solid wood is made of complete wood, which has the advantage of being durable and durable, with fresh and natural textures, and is the preferred object in decoration. However, the cost and construction technology requirements of this kind of board are higher, and it is more suitable for high-end decoration such as villas and luxury duplex buildings.

2. a splint

Plywood is what we often call plywood, and the board is called fine core board in the board row. It is made of three or more layers of 1 cm veneer that are hot-pressed. It is currently one of the most commonly used materials in home decoration.

There are many specifications of splints, which are divided into 18 centiplate, 15 centiplate, 12 centiplate, 9 centiplate, 5 centiplate, and 3 centiplate.

3. Decorative panels

Decorative panel is a commonly used high-grade decoration material. The solid wood board is planed and cut into an ultra-thin veneer with a thickness of about millimeters, and the plywood is used as the base material and made by gluing process. The thickness of the decorative panel is about 3 cm.

4. Blockboard

Blockboard is commonly known as large core board. It is made of two veneers glued to a wooden board. **Cheaper than fine core boards, which have higher lateral flexural strength. The vertical flexural strength is even worse.

5. Particleboard

The main raw material of particleboard is wood scrap, which is then pressed with glue. Particleboard is divided into two types: extruded and flat-pressed particleboard. These materials are less strong, but they are also relatively inexpensive.

6. MDF

MDF is commonly known as fiberboard. It is made of wood fiber and plant fiber as raw materials and added adhesives, and its material is soft and impact-resistant, and the shape is rich.

7. a fireproof board

The main raw material of fireproof board is siliceous or calcareous material, mixed with chemical additives such as fiber materials, and made of decorative board by autoclaving technology. The thickness is generally millimeter, 1 millimeter and millimeter. Because the process requirements of fireproof board are higher, it is more expensive than decorative panels.

8. Melamine board

Melamine board is made by adding paper of different colors to melamine resin adhesive, drying to a certain degree of curing, and making a decorative board by hot pressing.

Panels are used when decorating a house, and what are the types of panels? Today, PCHOUSE will answer them for you one by one.

Panels are flat, rectangular panels of building material made of standard size and are used in the construction industry as components for walls, ceilings or floors. According to the classification of materials, the board can be divided into two categories: solid wood board and wood-based board; According to the molding classification, it can be divided into solid board, plywood, fiberboard, decorative panel, etc.

1. Classification by material.

1. Solid wood boardSolid wood planks are planks made from intact wood. These sturdy and natural textures make them the perfect choice for renovations.

2. Wood-based panels. Wood-based panels are boards or molded products made of wood or other non-wood plants as raw materials, separated into various unit materials by certain mechanical processing, and glued with or without adhesives and other additives.

Second, according to the molding classification.

1. a solid plate. The cross-section of the fretboard is solid, and it is called a solid plate.

2. a splintIt is also known as plywood, and is commonly known as fine core board in the industry. It is made of three or more layers of one-millimeter-thick veneer or sheet plate glued and hot-pressed. It is the most commonly used material for handmade furniture.

3. Fiberboard. Wood-based panels made from interwoven lignocellulosic fibers that take advantage of their inherent adhesive properties.

4. Decorative panels. Commonly known as panel, it is a decorative board with a single-sided decorative effect made of solid wood board precision planed into thin veneer with a thickness of about one, with plywood as the base material, and made by gluing process.

Plates can be divided into the following types:1Solid wood planks:

It is made from a single piece of wood with a natural wood texture and colour. 2.Man-made panels:

It is made of wood chips, wood chips, fiberboard, etc., which has a uniform texture and high stability. 3.Sheet metal:

It is made of metal materials, such as steel plate, aluminum plate, copper plate, etc., which has high strength and corrosion resistance. 4.Plastic Sheets:

It is made of plastic materials such as polyvinyl chloride (PVC), polypropylene (PP), etc., and has the characteristics of light weight and corrosion resistance. 5.Glass Plates:

It is made of glass material, which has the characteristics of transparency and high hardness such as coarseness. 6.Stone slabs:

It is made of natural stone or artificial stone, such as marble, granite, etc., and has the characteristics of high hardness, wear resistance, and no damage.

Plates generally have:

1. Solid wood board

As the name suggests, solid wood planks are planks made from intact wood. These sturdy and natural textures make them the perfect choice for renovations. However, due to the high cost of such plates and the high requirements of construction technology, they are not used much in decoration.

Solid wood boards are generally classified according to the substantive name of the board, and there is no unified standard specification.

2. a splintSplint is also known as plywood, commonly known as fine core board in the industry. It is made of three or more layers of one-millimeter-thick veneer or sheet plate glued and hot-pressed. It is currently the most commonly used material for handmade furniture.

3. Decorative panels

Decorative panels, commonly known as panels. It is a decorative board with a single-sided decorative function made by precision planing solid wood board into thin veneer with a thickness of about one, using plywood as the base material, and making it through an adhesive process. Decorative panel is a kind of high-grade decoration material that is different from the current oil mixing practice.

4. Blockboard

Blockboard, commonly known as large core board in the industry. The large core board is made of two pieces of veneer pressed together in the middle. The ** of large core board is cheaper than that of fine core board, and its vertical (distinguished by the direction of the core material) has poor flexural strength, but the transverse flexural strength is higher.

5. MDF.

MDF, also known as fiberboard. It is a man-made board made of wood fiber or other plant fibers as raw materials, applied urea-formaldehyde resin or other applicable adhesives, and is divided into high-density board, medium-density board and low-density board according to its different densities.

There are 8 kinds of boards, namely MDF, blockboard, finger-jointed board, particle board, particleboard, fireproof board, plywood, and ecological board.

1. MDF

It is a board made of wood into powder, and then glued and pressed into a board, it not only has good stability, but also has a good surface decoration effect, but its nail holding force is poor, and the waterproof and moisture-proof effect is also poor, so it is widely used in making furniture, flooring, etc.

2. Blockboard

Also known as large core board, the inner core is hollow or solid wood, and the two sides of the board are covered with a layer of plywood. Its strength is generally better, the nail holding force is also better, and it also has good moisture resistance and sound insulation, but its bending strength is poor, and it is prone to bending and deformation, so it is widely used in the furniture industry and the construction industry.

3. a finger joint plate

It is a board made of splicing of multiple wooden boards, its wooden board interface is generally jagged, and the amount of glue used is generally poor, so the environmental protection is generally higher, in addition, it also has a natural wood texture, so the decoration is better, but it is also prone to cracking, deformation and other problems, so it is widely used to make wardrobes, furniture, etc.

4. Particle board

It is made of plywood made of broken wood, the surface layer is generally made of melamine veneer, its material is generally more uniform, the strength is relatively high, not easy to deform the problem, and the stability is better, but its flatness will be worse than the density board, not easy to do complex modeling, so it is widely used in the furniture industry, interior decoration industry, etc.

5. Particleboard

It is made of synthetic resin and wood chips, and it not only has good nail holding power, but also has good sound insulation and heat insulation, and is relatively cost-effective, but its moisture absorption is also relatively high, so it is widely used to make wainscoting, furniture, etc.

6. a fireproof board

It is one of the refractory building materials, its main raw materials are fiber materials, siliceous or calcareous materials, etc., its color is generally brighter, and moisture-proof and impermeable and other aspects are also better, and the wear resistance is also better, ** is also more affordable, but can not create a three-dimensional effect, so it is widely used in the furniture industry, interior decoration industry.

7. Plywood

It is a board that cuts wood into wood chips, and then uses glue to bond multiple layers of wood chips together, its strength is generally relatively high, and it can resist bending, and it is not expensive, so it is widely used in the aircraft industry, furniture industry, construction industry, packaging industry, etc.

8. Ecological board

Also known as melamine board, the inner core is particleboard or MDF, etc., and the surface layer is made of paper, melamine board resin and other materials with different colors and textures, it has good high temperature resistance and wear resistance, and the decorative effect is good, and the surface is not easy to peel, discoloration, etc., so it is widely used in the interior decoration industry, furniture industry, flooring industry, etc.

Summary. Hello dear, happy to answer your <>

According to the different materials, the plates can be divided into the following types:1Solid wood planks:

Solid wood panels are made directly from natural wood, which has a hard texture and rich texture. 2.Man-made panels:

Man-made panels are made of pressed materials such as particleboard, fiberboard, plywood, etc., which are widely used in furniture manufacturing and are cost-effective. 3.Sheet metal:

Sheet metal is a material cut from metallic materials such as iron, aluminum, and copper, and is commonly used in construction, furniture making, and other fields. 4.Plastic Sheets:

Plastic sheets are made of polyester, polypropylene, polyethylene and other synthetic substances, which have the characteristics of corrosion resistance, heat insulation, heat preservation, sound insulation, etc., and are widely used in construction, road traffic, etc

What are the types of plates?

Hello, dear, I am glad to answer the <> of filial piety for you

According to the different materials, the plates can be divided into the following types:1Solid wood planks:

Solid wood panels are made directly from natural wood, which has a hard texture and rich texture. 2.Man-made panels:

Man-made panels are made of particleboard, fiberboard, plywood and other materials, which are widely used in furniture manufacturing and are cost-effective. 3.Sheet metal:

Sheet metal is a material that is carefully cut from metallic materials such as iron, aluminum, and copper, and is commonly used in construction, furniture making, and other fields. 4.Plastic Sheets:

Plastic sheets are made of polyester, polypropylene, polyethylene and other synthetic substances, which have the characteristics of corrosion resistance, heat insulation, heat preservation, sound insulation, etc., and are widely used in construction, road traffic, etc

In addition, there are glass plates: glass plates are processed from glass materials, with high transparency and strong hardness, and Wukong is widely used in the field <>of construction and decoration

Here are some <> related extensions that we hope you will find helpful

Plate refers to a flat-shaped material <> formed by cutting, planing or punching of wood, man-made panels or other materials