What s going on with the OPPO u707T phone being turned on all the time

You try to restore the factory settings to see if it can be used normally, if this doesn't work, it is estimated that it is the hardware problem of your mobile phone, go to the mobile phone store to consult to see what the specific problem is.

It may be caused by the failure of the third-party software installed in the phone, and the following methods can be taken to solve the problem:

1. When the phone is completely turned off, press and hold the volume down + power button for about 8 seconds (the phone will automatically enter the official recovery mode), select Wipe Data Factory Reset to restore factory settings, and then restart the phone.

2. If there is still a problem with the mobile phone, you can flash the phone and flash it into the new system.

It is recommended to give it a try: The Android system is generally in the state of mobile phone shutdown, press and hold the power button at the same time, and the volume reduction key (note: some also have to + home button, various mobile phones are different, and the way to enter is also different), enter recovery mode, release the volume button, move up and down with the home button (generally the house logo in the middle of the lower part).

Select Wipe Data Factory Reset and Yes--Delete All User Data for automatic processing on the phone. Finally, select reboot system now phone reboot and restore factory settings "Give people roses with lingering fragrance, good luck for a lifetime, if useful,

Solution 1:

Turn off the phone first, then press and hold the volume down button and power button of the phone to see if the phone can enter recovery mode, and then choose to restart the phone to try to see if it can be turned on normally.

Solution 2:

It is recommended to press and hold the power button for one minute, turn off the phone completely, and then press and hold the power button + volume down button for 10 seconds at the same time to see if you can enter recovery mode and restart your phone.

Solution 3:

Pick the battery and restart, if you don't delete the desktop software, you will have to flash the phone Solution 4:

Restore factory settings, the Android system is generally in the state of mobile phone shutdown, while pressing and holding the power button, volume down key (note: some also have to + home button, various mobile phones are different, the way to enter is also different), enter recovery mode and release the volume button to move up and down with the home button (generally the house logo in the middle of the lower part). Select Wipe Data Factory Reset and Yes--Delete All User Data for automatic processing on the phone.

Finally, select Reboot System Now and reboot your phone to factory reset.

It is recommended to try to press and hold the power button for 12 seconds to force it to shut down, and then restart the phone; If your problem cannot be solved, please bring the purchase invoice, warranty card and mobile phone to the nearest OPPO customer service center for testing and processing.

If the phone can be turned on normally after restarting, it is recommended to optimize the phone as follows:

1. Uninstall the recently installed software to eliminate the incompatibility between the software and the system;

2. If the system is unstable due to system abnormality or root, flash the system as soon as possible to repair the system (you can enter "**Flash Tutorial" to get the tutorial);

3. If the battery is fed, it is recommended not to completely deplete the power, and charge it in time if it is less than 20%.

A factory reset is possible.

Specific operation: Press and hold the power button + volume plus button of the mobile phone (some are volume down) to enter recovery.

Use the volume keys to move the cursor up and down, select Wipe Data Factory Reset, and select Yes.

Select Wipe Cache, select Yes.

After the double clearing is completed, select Reboot System Now to restart the phone and enter the phone system.

Hello! If the smartphone is stuck in the boot animation interface during use, it is recommended to try to press and hold the power button for 12 seconds to force it to shut down, and then restart the phone; If your problem cannot be solved, please bring the purchase invoice, warranty card and mobile phone to the nearest OPPO customer service center for testing and processing.

If the phone can be turned on normally after restarting, it is recommended to optimize the phone as follows:

1. Uninstall the recently installed software to eliminate the incompatibility between the software and the system;

2. If the system is unstable due to system abnormality or root, flash the system as soon as possible to repair the system (you can enter "**Flash Tutorial" to get the tutorial);

3. If the battery is fed, it is recommended not to completely deplete the power, and charge it in time if it is less than 20%.

The following is an introduction to how to set the factory settings of the mobile phone, unless it is absolutely necessary, it is generally not recommended to do so.

1. Press the menu button on the home interface to enter the settings menu. It can also be accessed from the settings icon.

2. Drag the interface to find "Backup & Reset". Some phones may be private.

3. After entering, you can see the option to restore factory settings. You can tick Google to back up some useful data based on the individual.

You need to see if this option is checked. However, many cn (Chinese mainland) mobile phones do not have Gmail, so there is no backup.

4. After clicking on factory reset, go to the next option.

There is an option to format the SD card, I don't recommend checking it, after checking it, all the things in the card are emptied. So be cautious!!

5. Finally, click to clear all content, of course, to clear the content of the phone itself.

After selection, the phone turns off and then restarts. The reboot may be slightly slower than usual because the phone is being cleared.

1) Press * on the standby interface and you will be prompted whether to restore factory settings, press confirm.

PS: Please back up your data first when restoring factory settings, the first method is a hard-handed phone, please use it with caution.

Connect the phone to the original charger, and then press and hold the power button to turn it on, or press and hold the volume up button + power button in the shutdown state, release the power button after the phone vibrates and restarts, and keep pressing the volume button until it enters the recovery mode Shuangqing system to see, if it still doesn't work, go to the after-sales service or return to the factory.

The reasons are as follows: 1. The boot line is abnormal: use the external power supply to supply power to the mobile phone, use the electric meter to detect whether the indication has changed, if there is no change, it is likely that the boot line is broken or the boot button is not in good contact.

2. The power supply circuit of the battery is abnormal: use the external interface to supply power to the mobile phone, see if it returns to normal when it is turned on, if it is normal, it is determined that the power supply circuit of the mobile phone is abnormal.

3. The IC of the mobile phone power supply is abnormal: test the test point of the peripheral circuit of the power supply IC according to the circuit schematic diagram to see whether the test value is normal.

4. The system clock and reset of the mobile phone are abnormal: you can use the dual total oscilloscope to detect the CPU power supply of the mobile phone to check whether the waveform in the reset is correct.

5. Problems with logic circuits: that is, faults in the circuit version of mobile phones, which can generally be solved by repair welding.

6. Software conflict: The installed software does not match the system of the mobile phone, which may also cause the mobile phone to fail to boot, you can connect the mobile phone to the computer to delete the program.

If the smartphone is stuck in the boot animation interface during use, it is recommended to try to press and hold the power button for 12 seconds to force it to shut down, and then restart the phone; If your problem cannot be solved, please bring the purchase invoice, warranty card and mobile phone to the nearest OPPO customer service center for testing and processing.

If the phone can be turned on normally after restarting, it is recommended to optimize the phone as follows:

1. Uninstall the recently installed Jingpai software to rule out the incompatibility between the software and the system;

2. The system is unstable due to system abnormality or root, flash the machine as soon as possible to repair the system;

3. If the battery is fed, it is recommended not to completely deplete the power, and charge it in time if it is less than 20%.

OPPO R6007 phone is stuck in the boot animation interface during use, it is recommended to try to press and hold the power button for 12 seconds to force it to shut down, and then restart the phone.

If restarting can solve the problem:

The following optimizations are recommended for mobile phones:

1. Uninstall the recently installed software to eliminate the incompatibility between the software and the system;

2. Caused by battery feeding, it is recommended not to completely deplete the power, and charge it in time if it is less than 20%;

3. The system is unstable due to system abnormality or root, flash the system as soon as possible to repair the system.

If the problem cannot be resolved after restarting:

Please bring the purchase invoice, warranty card and mobile phone to the nearest OPPO customer service center for testing and processing.

The phone pressed the power button and did not respond at allSolution:

If the phone accidentally gets into the water, do not do any more operations and send it directly to the OPPO service center for processing.

No water ingress: 1. Press and hold the power off button for about 10 seconds;

2. Connect the original charger to charge for half an hour, and then try to turn it on.

After the above methods, your phone still can't work normally, you can bring your phone to the OPPO service center, and our engineers will deal with it.

card machine situation; You can press and hold the power button for ten seconds to enter the shutdown state. Press and hold the power button and the volume reduction button at the same time to enter the recoveryr mode, select the power button through the volume button to confirm, double clear (restore factory settings and clean cache wipe data factory reset and wipe cache partition), you can also unlock, but this will delete the data in the machine.

Hello, in this case, it is recommended to go to the customer service center to find a staff to help you detect and process, you can consult the staff in person for the specific situation, please forgive me for the inconvenience caused, OPPO national customer service center address and**Information inquiry, you can click on the following **view:

Before you go, it is recommended to ask the staff about their working hours to avoid inconvenience to your time.

If you have any other questions, you can enter the OPPO enterprise platform to ask customer service questions!