The computer monitor is half black, the screen is half black, and the screen is not black

Half of the computer monitor has a black screen and half no black, which belongs to the computer screen, and the solution is as follows:

1. The screen is blurred caused by the temperature of the computer graphics card.

Solution: Check whether the fan is running normally, add lubricating oil to the fan, clean up the dust in the chassis, and solve the heat dissipation problem to eliminate the fault.

2. The solution caused by the graphics card or monitor not supporting high resolution:

1) Restart the computer, press the F8 key continuously, pop up the advanced boot menu, select enter to enter the "Safe Mode" to log in to the system, then enter the display settings under Windows, select the 16-color state, click the "Apply" button, click the "OK" button;

2) Restart the computer, in Windows normal mode, enter the device manager, delete the graphics card driver, and restart the computer;

3) The graphics card is loose, and unplugging the graphics card and reinserting it after shutting down usually solves the problem;

4) If the system is overheating, including the CPU temperature is too high and the graphics card chip temperature is too high, you can install a cooling fan at the corresponding position in the case, or put the case in a well-ventilated area.

According to your statement, it seems that it is a liquid crystal display, and the lamp is aging. Swap it out and it will be solved. If you take it for repair, you must ask the master to replace all the lamps for you with new ones, so as not to take it back and it won't take long for the top to be black and bright at the bottom.

Summary. 1. Software conflicts, avoid installing multiple similar software; 2. The resolution of the computer screen is incorrect; 3. The computer graphics card driver is incorrect; 4. Display failure; 5. Set the problem, right-click the attribute on the desktop, then click on the background, select a ** as the background and click OK; 6. I touched the computer monitor and needed to debug it; 7. The screen is about to be scrapped, and the color is abnormal due to local damage to the internal electron gun or liquid crystal leakage.

The computer monitor is half black, the screen is half black, and the screen is not black

1. Software conflicts, avoid installing multiple similar software; 2. The resolution of the computer screen is incorrect; 3. The computer graphics card driver is incorrect; 4. Display failure; 5. Set the problem, right-click the attribute on the desktop, then click on the background, select a ** as the background and click OK; 6. I touched the computer monitor and needed to debug it; 7. The screen is about to be scrapped, and the color is abnormal due to local damage to the internal electron gun or liquid crystal leakage.

The laptop screen is half displayed and half black.

Mainly you get a professional repair computer ** to check down. Probably the screen is scrapped.

Hello dear, happy to answer your <>

What to do if the computer is half black and half is normalThe solution is as follows: 1. Move the mouse to the black dividing line in the middle, hold down the left mouse button, and move to the right; 2. Keep holding down the left mouse button and move to the far right; 3. In this way, the screen will return to full screen.

One: Upgrade the graphics card driver to the latest version two: Then adjust the screen resolution 1:

In the blank space of the desktop, right-click and select Display Settings. 2: Click Advanced Display Settings3:

Choose the recommended screen resolution, the computer boots half of the black screen, generally for the lack of system files, or the file is corrupted and missing, or the graphics card driver or virus boots, press f8 to enter the safe mode, delete the graphics card driver, restart, and reinstall the graphics card driver or enter the safe mode, start the menu, run the input msconfig enter, in the startup, remove all (except ctfmon) checkmarks, save and reboot try (this can also speed up the boot of the computer) reinstall the system, the above is the information I query for you Hope mine is helpful to you.

Hello, the situation that the computer screen is half black and half normal is caused by the following reasons:1Signal Beam Card Problem:

A faulty computer graphics card or a problem with the graphics card driver may cause the screen to be half black and half normal. 2.Loose screen interface:

This problem can also be caused by a loose or poor connection to the computer's screen. 3.Screen glitch:

This kind of problem can also occur if the screen itself is malfunctioning. If this happens, you can try the following solutions to muffle:1

Reconnect the screen interface: First of all, you can check whether the interface connecting the computer to the screen is loose or poorly connected, and if so, you can plug and unplug it again to try to solve the problem. 2.

Update the graphics card driver: If there is no problem with the screen interface, you can try to update the graphics card driver or reinstall the graphics card driver, which can fix the screen problems caused by some driver problems. 3.

Replace the screen: If none of the above methods can solve the problem, then it is likely that the screen itself is faulty and needs to be replaced. It should be noted that if you are not sure about the cause of the problem, it is best not to try to repair it yourself, but consult a professional or go to a professional computer repair shop to repair it to avoid more serious damage.

Is there a **? Is it a problem with your monitor settings, you can try to restore the factory settings of the monitor, if the problem is still there, then there can be a quality problem with the monitor.

Dear, half of the computer has a black screen and half of the party is normal, which is usually caused by a hardware problem or a malfunction of the operating system. Here are some of the steps you can try to fix it:1

Restart your PC and see if that fixes the issue. Sometimes, a simple restart of your computer can eliminate such problems. 2.

Check whether the electric number cable connection is good. It may be that the cable is loose or broken, which leads to this situation. You can replug the monitor's cable to make sure it's in good contact.

3.Replace the monitor. This can happen if your computer's monitor is damaged.

Try a different monitor to see if your PC works. 4.Update the graphics drivers.

If none of the above steps resolve the issue, it may be a hardware malfunction inside your computer or a malfunction in your operating system. It is recommended that you contact a professional technician for inspection and repair. Note that if you think there's a hardware problem, you should avoid trying to turn on your computer or replace the hardware yourself to avoid further damage or danger.