-
If the headset is not plugged in, the headphone mode may be because the switch reed inside the headphone jack is dirty and rusty or has lost its elasticity, resulting in the switch not being able to disconnect normally, and the mobile phone system will mistakenly think that the headset is still plugged in. Try plugging and unplugging the headphones a few more times to see if they get back to normal.
The mobile phone detects whether the earphones are plugged in by the reed switch inside the earphone socket, and when the earphones are plugged in, the reed switch is bounced, and the system judges the status of the earphones.
-
In this case, if it is not serious, just turn off the battery to remove (iphone) without it, and then throw out the water in the earpiece, and then gently screw in the cotton swab to absorb the water, and then use the hair dryer to turn on the hot air on low gear to slowly dry the remaining moisture, and restart the phone.
If the problem still can't be solved, it may be that the battery cell is burned out due to a short circuit for too long after water ingress, and this situation will have to be replaced after the after-sales service.
Under normal circumstances, there will be no second situation, I only encountered once, a friend's mobile phone was simply wiped dry after the rain did not pay attention to the headphone jack, and then at night with the headphones to listen to the song to sleep, and after a night and a long time of high temperature short circuit before burning.
-
No headphones are plugged in to show headphone mode, what's going on.
-
If you don't plug in the headphones, the headphone mode will be displayed, and you will be taught a few tricks to solve it.
-
1. If the equipment is damaged, liquid and ash into the earphone jack, etc., which may affect the function of the earphone jack, please bring the equipment to the customer service center for wheel inspection;
2. Please try to plug in and unplug the earphones once to confirm whether the earphone icon display is back to normal. If you still have the headphone icon, you can try restarting your phone to check it;
How to reboot your phone:
1) Press and hold the power button of the mobile phone to pop up the "Restart" option to turn it off;
2) Slide down at the top of the mobile phone screen to bring up the shortcut details page twice The bottom of the screen slides up to enter the control center, and click the "Shutdown and Restart" switch;
3. If the device uses a Type-C headphone interface, please confirm whether you are using a Jianzhi one-turn multi-turn charging cable or an unofficial headphone adapter cable, these devices may not be compatible with the device, resulting in the abnormal display of the headphone icon, it is recommended to disconnect the device to block Tongmin to view.
4. If the above methods fail to help recover, the customer service center needs to be tested and processed (customer service center address: enter vivo official website vivo**app--my--service outlets, after-sales outlets--select provinces and cities to query the address of the customer service center);
-
The headphone mode is displayed when the phone is not plugged in because the phone is wet or the headphone jack is flooded. If it is not serious in this case, just turn off the phone and take out the battery, then throw the water out of the earpiece, then gently screw in and absorb the water with a cotton swab, and then use the hair dryer to turn on the hot air, slowly dry the residual moisture, and restart the phone.
1.If the problem still cannot be solved, it may be that the short circuit time after water ingress is long. The battery will burn out and the battery will need to be replaced after sale.
My friend's phone was simply dried after being drenched in the rain without paying attention to the headphone jack, and then went to bed with the headphones at night, and after a long night of high temperature and short circuit, the phone burned out. Here I would like to warn everyone, in addition to blowing the battery motherboard, the headphone jack should not be ignored either.
2.If you encounter problems that cannot be solved, you will send them for after-sales maintenance in time. Or find a professional repair organization to carry out repairs. Once there is a problem with the mobile phone, you need to find out the cause in time and then solve it as soon as possible, so that you can quickly resume normal use.
3.The mobile phone system mistakenly judges that the earbuds are still plugged in, and the headset mode is displayed, so you can try to plug and unplug the earbuds multiple times. The switch reeds inside the headphone jack are dirty, rusty, or lose their elasticity, resulting in the headphone detection switch not being disconnected normally.
4.You can twist the tissue paper into a stick shape and gently screw it into the jack in the direction of the twist, bringing out the dust and seeing if it can return to normal. If it still doesn't work back, you'll need to replace the headphone socket.
-
If the OPPO phone is not connected to the earphone, but the earphone icon is displayed in the status bar, it is generally due to the dewelding of the earphone socket, the deformation of the shrapnel, or the phenomenon caused by water or dust when plugging in and unplugging the earphones. We recommend that you perform the following steps:
1. Replace other earphones and re-plug them to see if they return to normal;
2. Use the earphones to rotate or switch sides to plug and unplug at multiple angles to see if it returns to normal;
3. Restart the phone to see if it can return to normal;
4. After backing up the important information of the mobile phone, perform a factory reset operation to see if it can be restored to normal;
5. If none of the above methods can solve your problem, please back up your personal data, and bring the purchase invoice, warranty card and mobile phone to the nearest OPPO Keshi Bureau Hanxunhu Service Center for testing and processing.
-
If your phone doesn't have headphones plugged in but it shows headphone mode, it probably isTwo reasons, one isDue to moisture, water or other foreign objects are blocked in the earphone jack area, causing the headphone mode.
Another situation is due to:The microswitch failsThe cause is that the earphones have been unplugged, but the switch has not been disconnected in time.
The workaround is something you can tryQuickly plug and unplug the headphones multiple timesIf you still can't make the headphone mode logo disappear, you can take your phone to an after-sales outlet to replace a headphone jack.
-
1. If the device is damaged, liquid and dust enters the earphone hole, which may affect the function of the earphone hole, please bring the device to the customer service center for testing;
2. Please try to plug in and unplug the earphones once to confirm whether the earphone icon display is back to normal. If you still have the headphone icon, you can try restarting your phone to check it;
How to reboot your phone:
1) Press and hold the power button of the mobile phone to pop up the "Restart" option to turn it off;
2) Slide down at the top of the mobile phone screen to bring up the shortcut column detail page twice The bottom of the screen slides up to enter the control center, and click the "Shutdown and Restart" switch;
3. XingzhiqiaoIf the device uses a Type-C headphone interface, please confirm whether you are using a one-turn multi-charging cable or an unofficial headphone adapter cable, these devices may not be compatible with the device, resulting in the abnormal display of the headset icon, it is recommended to disconnect the device to view.
4. If the above methods fail to help recover, the customer service center needs to be tested and processed (customer service center address: enter vivo official website vivo**app--my--service outlets, after-sales outlets--select provinces and cities to query the address of the customer service center);
-
If you are using a Huawei mobile phone, and the earphone interface is not plugged into the earphone interface and the earphone icon is displayed, there are many reasons for the phenomenon of Jingdan, which may be due to liquid, moisture, dust, etc., or whether the earphones are standard or not, which may affect the function of the earphone jack. Here's how you can try to solve it:
1. Please try to plug in and unplug the earphones once to confirm whether the earphone icon display is back to normal.
2. If there is still a headset icon after plugging and unplugging the earphones, please restart the phone to try whether it will return to normal.
3. If you try to plug in and unplug the earphones and restart, there is still a headphone icon display:
1) Please check whether there is liquid, moisture, or dust near the headphone jack, which may affect the function of the headphone jack.
2) Please confirm whether you are using a non-standard one-turn multi-turn charging cable or earphone adapter cable, the use of non-standard one-turn multi-transfer charging cable or earphone adapter cable may not be compatible with your mobile phone, resulting in the abnormal display of the earphone icon, it is recommended that you use the standard charging cable or earphone adapter cable.
4. If none of the above methods can solve your problem, please back up your data in advance (third-party applications such as QQ and WeChat need to be backed up separately) and bring your purchase voucher to a nearby Huawei customer service center for testing.
-
The phone doesn't have headphone mode plugged in, but it shows headphone mode? You can turn off the headphone mode in the phone settings, system, and accessibility mode.
-
The following describes how to troubleshoot the situation that the vivo phone does not have earphones plugged in but the earphones are connected:
1. If the device is damaged, liquid and dust enters the earphone hole, which may affect the function of the earphone hole, please bring the device to the customer service center for testing;
2. Please try to plug in and unplug the earphones once to confirm whether the earphone icon display is back to normal. If you still have the headphone icon, you can try restarting your phone to check it;
3. If the device uses a Type-C headphone interface, please confirm whether you are using a one-turn multi-charging cable or an unofficial headphone adapter cable, these devices may not be compatible with the device, resulting in the abnormal display of the headphone icon, it is recommended to disconnect the device to view.
This operation will not delete the data in the phone, and will restore all the settings in the phone, including: the wallpaper set, the unlock style, wifi, and the default turn on Cheng Chun order, etc., and the third-party software logged in the phone also needs to be re-logged in.
It is recommended to go to the cloud service -- device cloud backup -- backup data type -- system data -- return -- immediate backup to back up some system settings and desktop layout; Cloud service--Data synchronization--Turn on WLAN, Bluetooth, etc. to synchronize data to cloud service.
5. If the above methods are invalid after operation, you can bring your mobile phone and purchase voucher to the customer service center for testing and processing, customer service center address: enter the vivo official website vivo**app--my service outlets or vivo official website web version--slide bottom--service support--service outlets query--select provinces and cities to query the customer service center address. It is recommended to contact ** in advance before going to avoid empty running, plan the itinerary reasonably, and travel safely.
No headphones are plugged in to show headphone mode, what's going on.
It may be a problem with the settings, or it may be that the metal piece in your headphones is crooked.
When the Huawei phone is not plugged in the headphones, the headset mode is displayed, and there are many reasons, mainly due to the following reasons. >>>More
If your phone plugs in wired earphones and does not display the earphone icon or does not respond, you can use the following methods to troubleshoot: >>>More
Hello, the status bar has been showing the earphone icon is generally when plugging in and unplugging the earphone, excessive force and oblique plugging and unplugging, etc., which is easy to cause the earphone socket to be desoldered, shrapnel deformation, and because the earphone jack is exposed, water, iron filings, dust, etc. may also occur. Workaround: >>>More