How can the Apple phone display the headphone mode without headphones

No headphones are plugged in to show headphone mode, what's going on.

The reason for the headphone mode is related to problems such as clogged iPhone earpiece, water ingress, and dropped mobile phones.

Resolution. Clogging, getting dirty:

Unsuitable mobile phone film, pocket and cotton wool in the bag may cause the mobile phone earpiece to be blocked, in this case, the performance of the mobile phone is that the sound is very small, and the iphone is still indifferent when the volume button is pressed. At this time, you can take off the protective case and film of the iPhone, and clean the handset and speaker of the mobile phone with a dry brush.

Water ingress: Under normal circumstances, the possibility of water ingress into the mobile phone is greater than that of clogged clothes, at this time, you can bury the mobile phone in a dry rice tank or cat litter overnight, and you can also use a hair dryer directly to serve if you are troublesome.

The reason why the iPhone shows the headphone mode without headphones is that the copper contact switch in the headphone jack is in poor contact or the center point is damaged and cannot be reset.

If your phone still shows headphone mode after unplugging the earphones, you can try the following methods:

1. Turn off the phone and restart it to see if you can cancel the headphone mode.

2. Use the earphones to plug in and unplug them multiple times, and rotate them at multiple angles at the same time to see if the earphone mode is eliminated.

3. Turn off the phone and restart it to see if the headphone mode can be canceled.

4. Replace other standard earphones and try to see if you can eliminate the headphone mode of your phone.

5. If none of the above works, you can only back up the data and then restore the factory settings to see if you cancel the headphone mode.

Sixth, the factory recovery can not be restored, the software problem can be ruled out, only to send the repair to the customer service center for processing.

If it is caused by improper audio settings, it can be solved by re-correcting it. Take Apple XS as an example, the steps are as follows:

1. Directly in the settings window of the phone, click on the auxiliary function to enter.

2. If it's okay, just continue to select Touch Jump.

<>4. In this way, the automatic adjustment will be determined according to the diagram, and the requirements can be realized.

It may be that the headphone jack is wet, the micro switch in the headphone jack does not spring back to its original position, or the system bug problem.

1. The headset is damp.

If the Apple phone has fallen into the water or worked in a humid environment for a long time, as the interface on the Apple phone that has the most contact with the outside world, it is also possible to malfunction.

2. The micro switch in the headphone jack did not spring back to its original position.

There are many reasons why this happens: lint and debris from clothes getting into the headphone jack; The bouncing mechanism of the headphones is out of order.

Solution: You can poke the finely twisted cotton swab into the earphone jack, don't be shy and poke it as deep as possible, clean up all the dust and debris inside, and the bounce switch is likely to return to its original position.

3. System bugs.

Even if the earbuds are not plugged into the headphone jack, the phone is still indulged in headphone mode and "can't extricate itself".

Solution: This situation is relatively rare, you can switch the speaker mode and play it a few times**, and then switch back to the default situation to try.

If these methods fail to turn off the headphone mode of the Apple phone, it is recommended to find Apple's after-sales service to deal with it.

His headset mode corresponds to the mode of Bluetooth headset, although there is no headphone socket, but you can use Bluetooth headset, or use it charging port adapter to connect out of wired headset, both ways can use headphone mode.

Dear, I'm glad for your question Apple doesn't plug in the headphones to display the headphone mode, the specific operation steps are as follows: it may be that the micro switch of the headphone jack fails, or it may be that the headphone jack is damp and water, or there is a foreign object that causes the headphone mode. Try the following removal methods:

1. Restart your phone or plug and unplug the earphones several times until the earphone mode is deactivated. 2. Use a cotton swab dipped in alcohol to rotate and wipe the headphone plug and mobile phone jack (the plug or jack may be oxidized) to try it. 3. Use the headphones to access the interface, turn on the iPod to listen**, then press pause, press the home button to return, turn off the iPhone (without using other third-party software) to pull out the headphones, and then turn on.

4. If you don't succeed in trying a few more times, and it still doesn't work, long press Power Home to hard restart, and then when the white apple appears, pull out the earphones, you can cancel the headphone mode, thank you for your consultation, I hope mine can help you

The Apple phone obviously doesn't have headphones plugged in, it may be set to headphone mode by you, click on the headphone mode to change to speaker mode.

If the headphones are not plugged in, the phone will show the headphone mode. That's because your headphone jack is broken. You can use headphones. Check the jack and you'll check it.

If you don't plug in the headphones, then the headphone mode, you may accidentally press a button, and then it becomes the headphone mode, and you may touch it yourself. You can try to turn your phone on and off again, and then try to see if this headphone mode can be canceled? It's also possible that you just plugged in the headphones and then unplugged them and then the phone hasn't recovered.

In this case, it is recommended that the landlord first restart the mobile phone to try, if it still does not work after restarting, you can use a cotton swab. Poke it at the headphone jack to see if it can be solved, if it still doesn't work, you can only send it to the after-sales service for repair.

No headphones are plugged in to show headphone mode, what's going on.

If it is caused by improper audio settings, it can be solved by re-correcting it. Take Apple XS as an example, the steps are as follows:

1. Directly in the settings window of the phone, click on the auxiliary function to enter.

2. If it's okay, just continue to select Touch Jump.

<>4. In this way, the automatic adjustment will be determined according to the diagram, and the requirements can be realized.

It may be because the switch reed inside the headphone jack is dirty, rusty, or has lost its elasticity, resulting in the switch not being able to be disconnected normally, and the mobile phone system will mistakenly think that the headset is still plugged in.

Try plugging and unplugging the headphones a few more times to see if they get back to normal.

The mobile phone detects whether the earphones are plugged in by the reed switch inside the earphone socket, and when the earphones are plugged in, the reed switch is bounced, and the system judges the status of the earphones.

This may be a foreign object in the headphone jack, causing the phone to mistakenly think that the headphones are plugged in, and use a hair dryer to blow the headphone jack.

The connector in the headphone jack is stuck, just dial it with a toothpick.

Bar Chinese switch to English, switch off and restart immediately, absolutely OK, the phone is good in switching back, so you can't hit me well, don't thank me for being a live Lei Feng.