How to wash Pu er tea, how to wash Pu er tea stains

1. Put the Pu'er tea leaves into a filter cup, about 10 grams (spread all over the bottom of the cup, slightly higher).

2. Pour the boiling water into the filter cup and cover the tea leaves.

3. After a while, take out the filter cup and discard the first tea.

4. Pour boiling water again, cover the tea leaves, cover the cup, and let stand for about 20 seconds.

5. Open the lid of the cup and turn it upside down, take out the filter cup, and drip off the tea juice slightly, as for the lid of the cup.

6. Okay, a cup of fragrant and mellow Pu'er tea is ready.

7. Don't forget the tea leaves in the filter cup while enjoying, don't throw him away, Pu'er is very resistant to bubbles, when you finish drinking the first course, you can put the filter cup back into the teacup, also fill the water again, cover, let it stand for a while, and the second cup of Pu'er is brewed again.

8. The tea soup of the second and third brews can be mixed and drunk together to synthesize the tea properties so as not to be too strong.

9. After the fourth time, each additional bubble will increase by 15 seconds, and so on.

We are a professional manufacturer of Pu'er tea, if you have any questions, you can consult **Want Want: Good luck***. There is professional customer service for your questions.

Brew with the boiled tea water for about ten seconds or so, I have always done this myself, Pu'er tea must not be without the tea washing process, because Pu'er most of the tea leaves are used, it is bound to accumulate some dust and the like on it, cleaning can also moisten the tightly pressed tea leaves, bringing a better taste

In fact, you can directly brew it with 100 degrees of boiling water for about 5 or 10 seconds

Because we're not experts, no matter how particular we are, we can't brew that flavor, haha.

1. First of all, absorb the clothes stained with Pu'er tea with a white paper towel, which can expand the scope of contamination. Because the more contamination there is, the more troublesome it is to clean, so it is recommended to wipe it with a paper towel immediately after it gets wet.

Please click Enter a description.

2. After wiping with a paper towel, soak it in water, and drop a little laundry detergent into it while soaking, so that the Pu'er tea can be soaked out for later cleaning.

Please click Enter a description.

3. After soaking for two hours, you can start washing, first scrub vigorously on the places stained with Pu'er tea, so that the Pu'er tea stains can be thoroughly cleaned.

Please click Enter a description.

4. After cleaning, wash it with water several times, so that basically the Pu'er tea stains will be cleaned after cleaning. So how do you keep your clothes from leaving tea marks on them?

Please click Enter a description.

5. Dry the clothes in reverse when drying, and the clothes stained with Pu'er tea stains can be wrapped in paper towels, so that the clothes that are dried out will not be printed.

Please click Enter a description.

Please click Enter a description.

Add water with detergent, just wash it, and it is the same as ordinary tea stain residue.

1. First prepare a bowl, 8g ripe Pu'er tea or raw tea, a pot of boiling water, before washing the tea, use boiling water to scald the bowl (warm cup), and then put 8g Pu'er tea into the bowl, lift the kettle, fill the water along the edge of the bowl, keep the water injection speed stable, put down the teapot after filling with water, you can pour out the tea soup, this process is tea washing, the main purpose of tea washing is to wake up the tea leaves.

2. Tea washing is also called "infiltrating tea washing method", the general process is to warm the cup, throw the tea, and soak the soup, the soup for washing the tea is generally not recommended to drink, of course, it is not absolute, if you are interested, you can also drink, not absolutely.

3. Warm cup: If you want to do a good job, you must first sharpen your tools, introduce boiling water into the bowl, tea set, and tea cup, and use the high temperature of boiling water to raise the temperature of the tea set, and at the same time clean the tea set, stimulate the tea fragrance, and pour out the water in the cup after completion.

4. Tea: The amount of tea is generally determined according to the capacity of the bowl, generally 110ml of the bowl, and the amount of tea can be 8g. The amount of tea is determined according to the personal taste, some people like the taste of heavy, so they will vote more, and some people like the taste of light can be less.

Generally speaking, it is advisable to have more than one for ripe tea, and not too much, just right is the best.

5. Soak out the soup: the water temperature is 100, lift the teapot, fill the water along the edge of the bowl (the water injection point is fixed at the edge of the bowl), or the wrap-around water can be filled, the speed of water injection should not be too fast, so as not to be full at once, maintain a normal uniform speed, put down the teapot after filling with water, basically you can make the soup, you can choose to pour it out after the soup, or you can try to drink.

1. Immersion tea washing method:

The method of immersion tea washing is to put an appropriate amount of tea leaves into a cup before drinking tea, then pour in a little boiling water, and then quickly pour the water away. This method can not only warm the tea leaves, so that the tea can fully play the excellent tea quality, but also play a role in "washing the mentality", which can be described as killing two birds with one stone!

2. Scraping foam washing tea method:

The method of scraping foam and washing tea is to put the appropriate amount of tea into the cup when brewing the tea, and use the method of hanging pot high flushing when pouring water, and fill the cup with boiling water at one time, at this time, the tea soup will have rich foam and float on the surface of the tea soup, and then just scrape off the foam, you can continue to brew and drink with confidence.