What machine tool cutting oil does not smoke? 30

Extreme pressure and anti-wear cutting oil, no smoke, plus a large proportion of extreme pressure agent, anti-wear agent and penetrating dispersant and other additives, to ensure the accuracy of the workpiece, the durability of the tool, no smoke, environmental protection.

In general, the higher the flash point of the cutting oil, the less smoke there is.

The flash point of ordinary mineral oil-based cutting oil is about 150 degrees Celsius, and good products can reach 170-180 degrees Celsius.

If you use a vegetable oil-based cutting oil, you will find that almost no fumes are generated. The flash point of vegetable oil-based cutting oil can reach more than 200 degrees Celsius.

I specialize in the production of cutting oils. You can provide some samples for your company to try cutting and tapping, excellent lubrication and extreme pressure, no smoke, environmental protection and no injury.

General coolant can be solved by improving cooling intensity.

1. Liannuo NC100 cutting oil is a high-performance metalworking oil, which is made of refined mineral oil and active additives, oily agents, rust inhibitors and special heat transfer additives by scientific formula, with good lubrication, cooling, cleaning performance, low friction coefficient for precision cutting. For general cutting, compared with common cutting oils, the surface roughness of the processed workpiece is reduced by many times, and the cutting effect is increased by 50-100%. This significantly increases cutting efficiency and tool life.

Add some cutting powder and dilute the oil.

It shows that the practical cutting oil does not meet the temperature requirements and cannot withstand the temperature, so it smokes and uses the cutting oil of Moda Koze.

The cooling performance is good, the flash point is high, the high temperature caused by friction is removed, and the workpiece is deformed by the excessive belt modification temperature, and the high flash point can withstand the high temperature and will not produce smoke.

The aluminum alloy cutting oil smokes because the cooling of the cutting oil is not good. In this case, you can choose a cutting oil with a lower viscosity and good cooling lubricity.

Liannuo NC200 cutting oil is scientifically formulated by oily additives, anti-wear additives, anti-sintering additives, high-temperature antioxidants, anti-rust additives and semi-synthetic base oils, which has good lubrication, cooling, low oil smoke and anti-sintering and anti-high temperature oxidation properties, and low friction coefficient. It is a special cutting oil for aluminum alloy and copper alloy.

The performance of the cutting oil used in the machining of CNC machine tools directly determines the accuracy of the workpiece, and the cutting oil with excellent performance can provide effective protection for the workpiece and the tool smoothly from physical lubrication to chemical lubrication, reduce tool wear, and greatly improve the machining accuracy of the workpiece. Whether the performance of the cutting oil meets the needs of the process directly determines the error accuracy of the workpiece, such as the use of rapeseed oil, mechanical oil, recycled oil and other non-special oils as cutting oil, there will be problems such as fast tool wear, scratches and burrs of the workpiece, and rust of the machine.

Liannuo NC100 cutting oil is a high-efficiency metalworking oil, which is made of refined mineral oil and active additives, oily agents, rust inhibitors and special heat transfer additives through scientific formula blending, with good lubrication, cooling, cleaning performance, low friction coefficient for precision cutting processing. For general cutting, compared with common cutting oils, the surface roughness of the processed workpiece is reduced by many times, and the cutting effect is increased by 50-100%. This significantly increases cutting efficiency and tool life.

Fully synthetic cutting fluid, which has no minerals in it, so it is transparent when mixed with water, which is relatively easy to identify, and is generally used for grinding and precision machining with light and medium loads. There is also a semi-synthetic cutting fluid, which is translucent with water and is used for heavy coincidence machining of non-ferrous metals.

Emulsion cutting fluid, an emulsion containing mineral oil, is milk-like when exposed to water and is used for heavy-duty non-ferrous metal processing.

Oil-based metalworking oil, which has a difference in mineral oil mixed oil, is oily, which is more likely to cause allergic rhinitis.

Water-based cleaning agent, the main function of which is to decontaminate, is generally used for the last process to do cleaning treatment, in most cases it is directly mixed with water to decontaminate in the way of spraying.

There is also a kind of cleaning liquid, which is the same as the above way of use, used in the last process, mostly in the way of spraying, which is the way in the machining center, and the non-machining center machine tool can only be operated manually and treated in an ultrasonic way.

Oil-based anti-rust oil and water-based anti-rust agent, which will form anti-rust protection on the surface of the processed metal, have the function of anti-rust in the short term, but generally do not use after the parts are processed, in many cases the parts are dried and processed, these are the differences between different types of cutting fluids.