Can anthurium divide in July? How to divide anthurium

In indoor conditions, anthuriums can also be divided in July.

The best time to give anthurium ramets is spring and autumn, when the temperature is between 15 and 28 degrees, and the air humidity is higher than 50%. Among them, spring 3 May is the best time to give anthurium ramets, which is better than autumn ramblings. The reason is that the temperature gradually rises in spring, and the seedlings are easy to survive after the anthurium branches.

Once it survives, it grows quickly, and it may bloom in autumn. If the plant is divided in autumn, the temperature and air humidity gradually decrease, the temperature difference between morning and evening increases, and the growth of anthurium seedlings slowly deteriorates, and the seedlings may not survive the winter, or they will not bloom until the summer and autumn of the second year, and the growth cycle will be greatly extended.

Anthurium raming should not be done in hot summers and cold winters. When the temperature is too high or too low, the growth rate of Anthurium is slow, it is in a dormant or semi-dormant state, and the ramets are not easy to survive, and the potting time is relatively long. Even if it survives, it grows poorly, and it is difficult to achieve the goal of rapid flowering.

In addition, the level of air humidity also has a greater impact on the anthurium ramet. The air humidity is high, and the seedlings are easy to survive after dividing. Conversely, the lower the humidity of the air, the lower the survival rate.

Anthurium is a perennial evergreen herb of the family Araceae of monocots. short stem nodes; Leaves emerge from the base, green, leathery, entire, oblong-heart-shaped or ovate-heart-shaped. petioles elongated, Buddha flame bracts flat, leathery and waxy, orange-red or scarlet; The inflorescence of the fleshy spike is yellow and can bloom continuously all year round.

Flower candles are native to tropical rainforest areas such as Costa Rica and Colombia. It often grows epiphytes on trees, sometimes on rocks or directly on the ground, and prefers warm, humid, and semi-shady environments, avoiding direct sunlight. Flower candles and flowers are strange and beautiful.

The long-lasting flowering period is suitable for potted plants, cut flowers or garden shade plants.

Anthurium.

Anthurium can also be sublet in July, but be careful not to damage the root system, and you can water it a little after potting.

When the mother anthurium is removed from the pot, it is found that there are many side buds at the base of its stem. After that, select a side bud that is not particularly tightly integrated with the mother plant, has more than two taproots, and grows well, and then cut it off.

Trim the cut root system a little and then soak it in a fungicide for a while to reduce the chance of it getting bacteria. If you want to speed up its rooting, you can also treat it with a rooting powder solution.

Set it aside for it to dry, prepare the soft and breathable flower soil, dig a small hole in it, plant the young plants in it, then fill the hole with the surrounding flower soil, and then slightly compact the flower soil with your hands. Finally, place it in a cool place and care for it carefully.

Flower care: The suction teeth knocked out by anthurium can be used for branch propagation, don't you know?

Raise anthurium in September, and "dig and dig" here will not only make it bloom more and more, but also divide the plants.

Combined with spring repotting, the side branches with aerial roots are cut off and planted to form a single plant, and the separated daughter plants retain at least 3 or 4 leaves.

If it is sown from seeds, it is more common in spring. Because anthurium is afraid of high temperature and cold, but it can also be planted in summer, and the temperature from April to May should be more suitable.

Temperature and humidity requirements for summer planting of anthurium.

Temperature and humidity Anthurium is shade-loving, its growth temperature is 18 to 28 , and the relative humidity is 60 to 80. According to the weather and other conditions, the specific relationship is as follows: cloudy day temperature 18 to 20, relative humidity 70 to 80; Sunny day temperature 20 to 28 , relative humidity 70.

The temperature is not lower than 14, and the temperature is not higher than 35. How to cool and moisturize in hot weather: Use a plant spray or sprinkler system, such as an exhaust fan combined with a rain curtain wall.

Light requirements for summer planting of anthurium.

Anthurium is a semi-shaded plant with a relatively low light intensity value, and a large amount of light needs to be shaded with a shade net of 75 to prevent discoloration and burns in bright light during the day. This is done by using two layers of shade nets: a fixed shade net of a lighter color and a movable shade net of a dark color.

Water quality requirements for summer planting of anthurium.

Irrigation is first of all a requirement for water quality, the salt content of watering water should not be too high, and the pH value should be controlled between 5 2 and 6 2. When well or surface water is used directly, the salt content is treated. Too much salt content can lead to smaller flowers, lower yields (cut flower varieties) and shorter flower stems.

The second is the watering method, according to the different substrates, determine the watering interval and watering amount, the general substrate moisture content should be kept between 50 and 80.

Water quality requirements for summer planting of anthurium.

Fertilization is based on the different growth periods and growth conditions of Anthurium, and the variety, quantity and interval time of fertilization are determined by formulating fertilization tables in different periods to meet the needs of plants in different periods for macroelements such as N, P, K, CA, MG, S and trace elements such as Fe, Mn, Zn, Be, Cu, Mo. In addition, growers can also choose anthurium series special fertilizers and fertile leaf water-soluble fertilizers for fertilization management.

Anthurium branches are divided into roots first, first of all, the anthurium is depotted, the root soil is washed, the root system with side buds and more robust is selected, the cutter should be sharper, the wound is kept flat, the use should be disinfected, and then the root system and the side buds are cut together, and the roots must not hurt the side buds and the roots below the side buds, otherwise the survival rate will be affected.

Treat new anthurium strains.

Simply prune the separated roots, soak them in the dorin solution for 3 5 minutes, and then dry them in a cool and ventilated place for 6 hours, until the wound is somewhat dry, indicating that you can start planting new varieties.

Make culture soil.

Use peat soil or vermiculite for anthurium culture, if you want to use garden soil and fine sand, you must pay attention to disinfection, otherwise it is easy to infect the wound of the root, so mix it in a pot with peat soil and vermiculite 2 3:1 ratio.

Anthurium ramets should first be depotted with anthurium, cut off all the roots with side buds, and use peat soil or vermiculite to cultivate soil, if the garden soil must be disinfected to avoid the roots being infected, or the roots are buried in the soil, slightly expose some new shoots, gently compact the soil, do not water and fertilize, and only need a small amount of spray.

When transplanting anthurium, the seedlings must be transplanted into acidic humus, and the medium must be breathable and water-friendly. Then put a plastic bag on top to retain water and keep warm. After a week, the plant does not turn yellow and does not wilt. The transplanting was successful.

Anthurium anthurium, formerly known as anthurium andraeanum (scientific name: anthurium andraeanum) Araceae, genus Anthurium andraeanum.

Perennial evergreen herbaceous flowers. The flowers are unique, there are Buddha flame inflorescences, the color is bright and gorgeous, the colors are rich, each flower has a long flowering period, the color of the flowers changes greatly, the inflorescence withers from the bracts to the flowers, and the color undergoes a series of changes, from the beginning of the beige to milky white, and finally becomes green, and becomes yellow before withering. Leaf-shaped bracts, common bracts are red, pink, white, etc., which have great ornamental value.

It can be propagated by sowing and dividing. The flower language of Anthurium is to show great ambition and enthusiasm.

Flamingo flowers are generally propagated by ramifications, while erect stemmed varieties can also be propagated by cuttings. It can be carried out in both spring and autumn, and it is better to linger after the temperature rises in spring. Select a daughter plant with more than three leaves, cut it off from the mother plant with stems and roots, cut off part of the old roots, wrap the moss and transplant it into a new pot, and the roots can be born and survive after 3 weeks and 4 weeks.

When planting, choose a 3-inch to 5-inch tile pot, and fill one-third of the broken tiles at the bottom of the pot to facilitate drainage. The culture material can be mixed with 50% sawdust, 10% moss, 20% humus and 20% coarse sand. Or it is mixed with humus, pond mud, dried animal manure, fine river sand, plant ash and a small amount of superphosphate.

It can be carried out in both spring and autumn, and it is better to linger after the temperature rises in spring.

Anthurium is poisonous! Don't eat anything with your hands after touching it, otherwise you will be poisoned.