What is the general content of the electrician certificate exam?

The first test is Ohm's law, the series and parallel connection of circuits, power accounting, electrical safety, the operating circuit of fluorescent lamps, the forward rotation control of motors, the use of electrical instruments, electric shock first aid, etc.

If you want to work on the job, then you should take the electrician operation certificate, that is, the special operation certificate, and the electrician needs to be on the job.

The electrician operation certificate is issued by the Safety Supervision Bureau and reviewed every three years. If you want to improve your job qualifications, you should take the electrician vocational qualification. The electrician professional qualification certificate is issued by the Labor Department, which is divided into five levels, primary, intermediate, high-end, technician and high-grade technician.

In addition, there is a national electrician network access license, which is issued by the State Electricity Regulatory Commission.

Very simple. 1. What you should know (60 points to pass the computer test).

2. The part that should be known (simple line connection, error correction, name of electrical equipment, most important first aid).

There are two types of electrician certificates Special Work Operation Certificate – the requirements are low, simple, and entry-level; Grade work certificate - there are certain requirements, depending on the level (1 5 levels).

The content of the primary electrician certificate examination is: two parts: theoretical test with crack laugh test and practical test. Specifically, according to the different types of certificates, the general special operation certificate attaches importance to safety training; Basic content of certificate training of the Department of Human Resources and Social Security; The certificate of the Electricity Regulatory Commission attaches great importance to practical operation and application.

To take the electrician certificate, you must first know which certificate you want to take, and the electrician certificate is divided into three types, electrician operation certificate, electrician professional qualification certificate and electrician network training license. The electrician operation certificate, also known as the special operation certificate, is in the form of a card (IC card), which is issued by the Safety Supervision Bureau and reviewed every three years. The electrician professional qualification certificate is issued by the Labor Department, which is divided into five levels, primary, intermediate, senior, technician and senior technician.

The difference between different electrician certificates:

The certificates issued by the Work Safety Supervision Bureau focus on safety education and training; The maintenance electrician grade certificate issued by the Department of Human Resources and Social Security represents the technical level of the holder, which is generally linked to the title and salary; The electrician network access operation license issued by the State Electricity Regulatory Commission generally trains high-voltage operations and special operations, focusing on practical operations.

Before the examination, it is necessary to clarify the purpose of the examination, and generally the enterprise will require one of the certificates of special operation certificate or electrician network operation source certificate and professional qualification. All three certificates can be used as electrician qualification certificates.

The above content reference: Encyclopedia - Electrician Certificate.

The electrician operation certificate is generally tested in theory and practice. Theoretical slag states are all multiple-choice questions, which mainly involve some basic knowledge; The practical operation mainly tests the use of the instrument, the connection of the line, and the knowledge of the source of first aid.

The content of the primary electrician certificate examination is: two parts: the theoretical test and the actual group return to the Hehe Pai exercise examination.

Electrician operating certificate.

The practical test is divided into three parts: basic knowledge assessment of circuits and first aid for electric shock.

Assessment, line wiring assessment.

1. Assessment of basic knowledge of circuits.

The basic knowledge of the circuit is assessed in the main wide inspection of electrical materials, electrical instruments, electrical symbols, safety appliances, signs, fire extinguishing equipment, the name, use, good and bad identification, and some safety knowledge will also be assessed. Generally, test questions are given, and candidates are required to dictate. The question will not be too difficult, and the assessment is whether the candidate's foundation is solid.

2. First aid assessment for electric shock.

The work of an electrician is very dangerous, and there is a possibility of electric shock at any time at work, and all general electricians are working in pairs, taking care of each other, and electric shock first aid is also common sense that electricians must know. There are also different standards for the assessment of electric shock first aid in different regions, and in some areas, as long as the candidate can dictate the steps, points and cardiopulmonary resuscitation of first aid.

However, some areas will simulate electric shock, allowing candidates to perform simulated artificial respiration and chest compressions.

3. Line wiring assessment.

Whether it is a high or low voltage electrician exam, the first two are compulsory content, but there are some slight differences in the first road wiring assessment. The low-voltage electrician assessment is based on the wiring diagram, while the high-voltage electrician assessment simulates the three-phase line wiring.

But the assessment will not be too difficult, as long as you master the single-phase electric energy meter with lighting control circuit, mutual inductance three-phase electric meter with voltmeter.

The four circuits of ammeter wiring jog control circuit, forward and reverse control circuit and jog belt self-locking cautious stare control circuit are basically no problem in the practical examination. This exam mainly assesses the candidate's ability to read drawings, hands-on ability, basic line wiring ability, and simple power drag knowledge.

Industry prospects:

Electrician is a traditional industry, general type of work, it is necessary to have a wide range, the development of the times has given higher requirements to electricians, and the ensuing treatment and general promotion are currently and will be a first-class profession. In order to reduce the cost of employment, enterprises and employers need recruiters who have mastered certain skills and obtained special jobs as the first target for recruitment.

Training objects: 1. Those who are at least 18 years old and in good health, and like to engage in the electrical industry;

2. Have a certain understanding of the basic theory and practice of electrician, and want to strengthen practice and obtain an electrician certificate;

3. Those who have been in contact with the electrical industry, but lack skills and certificates;

4. Those who have an electrician certificate and are not familiar with the operation of an electrician;

5. The majority of electricians and electrical enthusiasts can learn.

Training objectives: to cultivate the theoretical knowledge and practical operation methods and skills of electricians, so as to have the ability to work in electrical work.

Employment destination: can be engaged in the installation, commissioning, operation, maintenance and other work of electrical equipment in the enterprise, technical consultation, product sales and service marketing of electrical equipment in the retail industry, widely used in factories, property management, hotels, supermarkets, entertainment venues, etc.

Training content: electrical and electronics, electrical measurement, electrical technology, AC and DC single-phase, three-phase motors, circuit installation and troubleshooting of various machine tools, machine tool electrical, operation and maintenance of electronic control equipment, power supply and distribution technology; Courses such as the use and maintenance of electrical precision instruments to master the necessary operational skills for graders.

Training method: Adopt a training method that combines theory and practice; Strengthen theoretical knowledge, attach importance to practical training, and combine teaching and training.

Assessment method: 1. Skills test. Theoretical and practical assessment methods are used to test the skills and knowledge mastered.

2. Safety technology assessment. (Theoretical computer examination + practical electrical installation safety regulations assessment).

Certificate issuance: After passing the training examination, the Jiangsu Provincial Safety Supervision Bureau will issue the certificate of "Jiangsu Province Special Operation Certificate (Electrician)".

The electrician certificate is generally divided into theory and practice, and the specific ones can be viewed in the research book.

If you have an electrician foundation, you can prepare the information and add the number of the screen name.

How to take the electrician certificate:

The electrician certificate is open and can be applied for by everyone, and the electrician certificate exam is divided into two parts: a theoretical test and a practical test. Only if you pass the theory test, you can take the practical test, otherwise you need to take the test again. The electricians we hold mainly have special operation certificates, professional qualification certificates, and special operation qualification certificates for building construction.

There are three ways to obtain an electrician certificate:

1. Students can go to the nearest technical school to register as an electrician, and the school will participate in the training, and notify you to obtain the electrician certificate at the examination time.

2. You can sign up for an offline training unit that specializes in obtaining an electrician certificate.

3. Experienced people can also inquire and register online, submit information and pay fees to the local vocational skills appraisal center, and issue an electrician certificate within 15 working days after passing the examination.

Examination: 1. Theory examination.

There are a total of 100 questions in the theory test, and more than 80 questions answered correctly will be considered a pass. There is a mock question bank for the theory test, and the question bank is generally more than 700 questions, and more than 90% of the questions in the actual test are the original questions in the question bank, so candidates need to be extremely proficient in the more than 700 questions in the question bank. For some commonly tested theoretical contents, it is necessary to understand them in time, so that there will be no mistakes in memorization.

2. Practical examination.

The practical test mainly includes four subjects: basic electrician appliance operation and brief description, basic electrician wiring, safe operation awareness and emergency handling, each subject has four to seven questions, and the exam is drawn by lot.

Among them, the total score of electrician appliance operation and brief description of the subject is 20 points, involving pointer multimeter, pointer clamp ammeter, megohmmeter, grounding resistance meter, climbing pole, hanging ground wire, etc.