What is good for sanitary partition materials

Toilet partitions make the toilet more convenient, hygienic and beautiful to use. Due to the humidity of the bathroom. In the decoration process of the bathroom, we should not only consider the waterproof problem of the bathroom, but also pay attention to the selection of moisture-proof and waterproof materials when designing the partition.

If you are going to renovate the bathroom, then it is recommended that you need to know the common toilet partition materials.

Sanitary partition wall covering: tile, marble.

Bathrooms have the largest wall area, so they must be made of materials that are waterproof and resistant to corrosion and mildew. Easy to clean tiles, marble, mosaics and other colors, can collage rich patterns, and smooth and easy to dry, is a very practical wall material, but pay attention to the color of the ground material unity.

Sanitary partition floor material: granite.

The ground should be made of waterproof, dirt-resistant, non-slip granite, etc., the height should be 10---20mm lower than other ground, and the floor drain should be about 10mm lower than 10mm to facilitate drainage.

Toilet partition top material: aluminum gusset, acrylic ceiling.

The top surface is affected by water vapor and is most prone to mold, so it is better to use waterproof and heat-resistant materials. Generally, colorful aluminum gusset and acrylic molding ceiling are used, these materials have strong water resistance, and the surface is pasted with thermal insulation materials, which is an ideal material for bathroom ceilings, and the specifications are mainly 120mm wide strips and 300mm*300mm squares, and the surface structure has two kinds of flat and micro-hollow. Acrylic molded ceilings** are low, but are susceptible to aging; Colorful molded aluminum gusset is high, but the color is diverse, durable, and is the main material used in modern bathroom ceilings.

In addition, there are also the use of aluminum-plastic panels or calcium silicate boards, the latter is coated with cement paint, which is low and waterproof.

Nowadays, there are a lot of attention paid to decoration and design, and many people will choose to use partitions to decorate when they can. The use of space is more reasonable, and the decorative effect is also better. The specific aspects of partitions are described below.

1. Ground visual partition.

Zoning can also be achieved with the help of common building materials. The easy way is to identify the ground directly. Due to the visual relationship of human beings, the ground is a symbolic area of distinction, such as laying different floors in different spaces and separating them from materials or colors:

For example, the space of the entrance porch can be distinguished from the living room by tiles with a special mosaic effect; Floor space can be distinguished by laying a large area of carpeting.

With this zoning method, both large-area units and medium-area two-bedroom and three-room units can be used. When choosing a carpet, you should pay attention to the texture and color of the carpet, which should be consistent with the main color of the living room furniture.

2. Furniture partition.

Compared to the other ways mentioned above, it is a simple method to split directly with the furniture. A sofa, even if it is a single sofa, placed directly on the edge of the living room, already creates the effect of partitions, meaning that this is already the beginning of the living room space. If you can add some greenery to it, the effect will be more obvious.

3. Platform partition.

In addition to the flat surface, the way to separate the space can also be three-dimensional, heightened platform belongs to the latter. If a space is large, you can use it this way to make the difference between the two spaces by raising a portion of the ground. Therefore, the space of these two parts is high and low, and there is a clear gap, which is beautiful and practical.

They can be designed as a tea house, a sunny lounge, or even a bedroom, which is just as romantic if properly decorated.

This kind of division of space requires a relatively large space, and compact interiors are generally not done. This project needs to be carried out in parallel with other home improvement projects, so the owner and designer need to plan ahead; The raised floor also serves as a storage space; The decorative materials of the heightened platform need to pay attention to and advocate the consistency of the style of the ground, otherwise it will appear abrupt.

4. Ceiling partition.

The ceiling can also play the role of partition, which is regarded by designers as a "symbolic division of areas", and there are two common ways: one is to directly separate the space with obvious lines, this method is simple and clear, but not decorative enough; The second way is to decorate with different decorations, such as the same wooden ceiling for the living room and dining room, but different colors of paint, which can also achieve space division.

5. Elastic partition.

The so-called elastic zoning refers to the zoning that the owner needs to move, close or open at will. For example, the common door between the kitchen and the dining room belongs to this design, the kitchen door is open, and the two spaces are connected, close to realizing the partition; For example, the kitchen door is just a simple door, and the window is relatively large, so the window is fitted with the leaves of the folding window, which can also be connected or cut by folding and expanding.

Partitions are an indispensable part of home design, and they appear in almost every space. Taking the bathroom as an example, the premise of realizing the separation of dry and wet is to increase the partition design. Sanitary partitions will be washed with hot and cold water almost every day, and their waterproofness has become a priority for people when choosing partitions.

Single material: glass.

Based on the specificity of the area and function of the bathroom, it is necessary to pay attention to its permeability, practicality and durability when selecting the partition material. With this in mind, glass became the material of choice for this area.

The glass material is crystal clear, and there are many styles, such as transparent glass, frosted glass, tinted glass, black-framed glass and glass bricks. It is suitable for all styles and sizes of restrooms, especially for small areas.

Single material: brick wall.

In addition to glazing, brick walls are also a common method for sanitary partitions. The wall made of bricks and concrete masonry can stand up to the sky or half the wall, and then decorate the surface decoration such as cement paint, latex paint, and ceramic tiles.

In addition to the partition, the setting of the brick wall can also plan a storage compartment in the wall, making it a brick wall that can be both stored and partitioned, which is also an interpretation of a new function.

Mixed material: glass + brick wall.

Combining glass with brick walls is also an interesting setting. The top is presented with glass, and the bottom is made of brick walls, and the seemingly unmatched two are unexpectedly harmonious. The meaningless collision brought out such an indescribable visual perception.

There is no good or bad for these two materials, whether they exist separately or in combination, you can do whatever you want. After all, in addition to the original partition function, their appearance should be more in line with the preferences and actual needs of the homeowner.

Nowadays, people's requirements for decoration are relatively high, no.

Chengdu Yazhijie sanitary partition, personalized customized factory direct supply, high-end sanitary partition project, one-stop service.

When making partitions in the bathroom, you need to consider choosing durable materials. What kind of material should be used for sanitary partitions? Let's take a look.

1. a moisture-proof board.

The moisture-proof board is made by adding a certain proportion of moisture-proof particles in the production process of the substrate, also known as melamine board, with multi-layer special fiber materials, soaked with an appropriate amount of phenolic resin, and made by high temperature and high pressure. It is suitable for humid environments, and the degree of expansion of the cross-section when exposed to water is relatively low. The quality is excellent, and it is the best choice for the material of the tomb bridge next to the bathroom.

2. PVC board.

PVC board is made of PVC as raw material, and it is a board with a honeycomb mesh cross-section and a fierce eye structure. The toilet partition made with it has the characteristics of waterproof, flame retardant, acid and alkali resistance, mothproof, light weight, heat preservation, sound insulation, shock absorption, etc., and the processing performance is far better than that of wood, which is an ideal substitute for wood, aluminum and composite panels.

3. Tempered glass.

Tempered glass belongs to Wang Yu safety glass, which is to use chemical or physical methods to improve the strength of glass, form compressive stress on the surface of the glass, and first offset the surface stress when the glass bears external force, thereby improving the bearing capacity and enhancing the wind pressure resistance, cold and heat resistance, impact and so on.

4. Metal materials.

The sanitary partition of metal material is very waterproof, in addition to many other advantages, such as light weight, energy saving, easy installation, maintenance and strong performance, etc.; Moreover, it has high strength, good stiffness, is not easy to deform, and has a large load, even if it is impacted by external forces, it can keep its shape not easy to change.

Common sanitary partition materials are:

1. Man-made plate partition (phenolic resin high-pressure plate), 12 or 18mm thick phenolic resin high-pressure plate, characterized by moisture-proof, collision-resistant, foul-resistant, and easy to clean;

2. Natural stone partition, natural stone, solid structure, but easy to stick and return to alkali yellowing;

3. Composite board partition, honeycomb board outside splint and Menamine board, light weight, but easy to moisture, degumming or corrosion;

4. Plastic partition, plastic material, waterproof, but not resistant to high temperature, scratch resistant, easy to deform and pollute;

5. Tempered glass partition can be used independently from virtual sources, or aluminum alloy and plastic steel profile frames can be added, which is simple and durable.

With the development of society and the improvement of people's living standards, people are now using partitions when decorating houses and bathrooms, but when partitioning the bathroom, we don't know what materials to use, and what are the sanitary partition manufacturersSanitary partitionsOne. What materials are used for toilet partitions?

1.First of all, let's talk about the anti-compact board, which is currently the most popular material in the finished partition of the bathroom. However, its production process is made of decorative colored paper impregnated with melamine resin, and then added to multiple layers of black or brown kraft paper impregnated with phenolic resin layered, and we use steel plate to press it under high temperature and high pressure, which is a kind of wood-based panel.

Then due to the artificial process, its color pattern is very rich, and the anti-compact board is also very moderate, generally floating at 320 yuan per square meter.

2.Next, composite boards, honeycomb boards, splints and Melamine boards are light in weight and easy to be degummed or corroded by moisture; However, aluminum or stainless steel edge strips are easy to deform and oxidize, and water vapor is easy to invade and expand and corrode; Doors, door posts, and partitions need to be seamed or metal edges, and the overall effect is poor.

3.There are also plastics, plastic materials, waterproof, but not resistant to high temperatures, scratches, easy to deform and pollute; However, there are seams, and the seams are susceptible to water vapor erosion;

Two. Sanitary partition manufacturers.

1.First of all, Guangdong Yuhua Building Materials **** was established in 2001, and in the same year, it was founded to shout "Jia Lifu". However, it has been focusing on the research and development, design, production and sales of anticompact products.

The company mainly sells sanitary partitions, lockers, countertops, wall panels, honeycomb panels and outdoor furniture, among others. It has passed ISO9001:2008 quality management system certification as well as ISO14001:

2004 Environmental Management System Certification.

2.Next, Jinan Yuman Office Partition **** is a professional production of various materials of high, medium and low-grade public health partitions (6 different materials of plates), toilet hand washing partitions, office screen partitions (12 styles), wholesale of various materials of sanitary partition finished plates, anti-compact Sakura Kangbet generation and second generation boards, moisture-proof particle boards, PVC cavity boards, set research and development, design, sales, transportation, installation and after-sales service as one of the partition scale enterprises orange industry.

3.There is also a large number of products such as kindergarten wood products, wood, toy cabinets, toddler beds, bunk beds, and sanitary partitions. But a company specializing in production and processing; , with integrity; , scientific quality management system;

Nowadays, when people are decorating the bathroom, they use partitions, and what the above article says is about what materials and sanitary partition manufacturers are used for sanitary partitions.

Sanitary partitions are mainly designed to protect privacy and security, but also to be moisture-proof, waterproof, and easy to clean. Here are some common sanitary partition materials and their advantages and disadvantages:

Glass partitions: The glass partition is beautiful and generous, with good light transmittance, which can increase the lighting effect of the bathroom. At the same time, the glass material is easy to clean and not easy to rot and deform.

However, the safety of glass partitions is poor and easy to break, so it is necessary to use materials with high safety such as tempered glass or laminated glass.

Metal partitions: The durability and stability of the metal partition are good, and it can resist moisture and corrosion. At the same time, the metal partition can choose different colors and design styles, which can meet different decoration needs.

However, the installation requirements of metal partitions are high, requiring the use of professional tools and skills, and at the same time, metal materials may be relatively cold in winter, so it is necessary to pay attention to the lack of warmth when using the tomb.

plastic partitionsThe plastic partition has the characteristics of waterproof, moisture-proof, easy to clean, etc., and is relatively low, suitable for some decoration needs with limited budget. However, plastic partitions are less durable and stable than those of the Muddy Block, are susceptible to impact and deformation, and are not environmentally friendly.

stone partitions: The waterproof and moisture-proof effect of the stone partition is good, and it has a good sense of aesthetics and texture. However, the stone partition is relatively high, and the installation is also relatively difficult, requiring professional skills and tools.