Display debugging parameters, computer master advanced

The debugging parameters of each monitor are different, especially the geometry, which has the greatest relationship with the deflection coil, and the cpk parameters of the coil in the winding process are very difficult to control, so its various data can only be within the controlled range, but it cannot be consistent, so the geometric parameters of different displays are not the same, and the difference is large.

The oblique is not correct, you can try to adjust the tilt, parallelogram, curve, etc., anyway, adjust it to your personal feeling is good, and other people's monitor adjustment data will have a nondescript feeling in your own monitor. The difference is more.

Excuse me. I'm in the business of monitor repair. Because the display determines the row width according to different frequencies.

So there's no way for your monitor to give you specific parameters. It's up to you. In fact, debugging is very simple.

Adjust slowly. It'll be fine.

I'm telling you, your problem is not complicated, it's very simple, right-click on the desktop, properties, and the properties dialog box appears, settings, advanced monitors, and the values in the monitor settings under it are slowly debugged one by one, and it's okay, I've just finished doing it, and the system has the same problem as you, and mine is opening a web page, and it's not half of the screen, but that's where the problem comes in patiently thinking.

If the button cannot be adjusted, the deflection coil of the picture tube has moved, and the fastening screw is loosened to adjust. Tighten the screws when you're done.

The image is tilted, it may be linear distortion, take it to someone else to repair, this is not adjustable, and there are vitality parts inside that are damaged

The LCD TV signal cable plug is matched with the computer graphics card interface, and it can be plugged in;

1How many outputs does your graphics card have?

2Is your graphics card driving correctly?

3. If it is normal, you need to set the resolution to 640*480 60hz in advance before using the TV as a monitor, and then connect the TV. You say your TV is VGA connected? HDMI cable can not be used、The conversion head is more irreversible。

4. Or change 1920*1080 60Hz to 640*480 60Hz after powering on F8

It is recommended to try it with an HDMI cable instead.

19893688 Hello.

The best resolution of BenQ FP71G+U is 1280x1024, because the resolution of the display is given by the graphics card, if it does not reach the best resolution of the display, please update the graphics card driver or replace the graphics card, so that the problem can be solved.

Benq Superman.

The best resolution of FP71G+U is 1280x1024, which is supported by general graphics cards, if you don't have a graphics card driver installed, there may not be this resolution at that time. Also, the LCD does not need a refresh rate, the default is 60, it's fine, don't go very high, otherwise it's not good for the display.

Find another monitor to replace it, if the other monitor can display normally, it is a problem with the display, if not, then check and kill the Trojan, many DOS Trojans or viruses will have a black screen flashing when running.

Is it flat or LCD,Graphics card driver from the bottom,First exclude the graphics card,It seems to be a problem with the display,Q chat 49846667

The graphics driver is reinstalled.

I think there might be something wrong with the screen cable.

Donor, no one in the world can save you, the only one who can save you is yourself, may the Light be with you, Amen.

Short circuit or the switch has too much dust, is it still not able to turn off? Just go check it out and repair it.

The problem with the graphics card driver may be that the graphics card driver and the graphics card are not compatible, so it is recommended to use the original graphics card driver or the matching graphics card driver. There are many on the Internet, you first look at the model of your computer and then choose.

Can you describe the details more? User mode should be a mode of the display, you check the display, whether there is a short circuit or the switch has too much dust, I seem to have seen such a problem before. If you can't turn it off, you can check and repair it.

Automatic installation. Open the CD-ROM drive, put in the font CD, the CD will automatically run the font installation program, select the font you need to install, and then press Next all the way to install the font to the fonts directory of Windows.

Manual installation. Some font discs don't have an automatic installer, so you'll need to install them manually. Turn on my computer, then open the C drive, then open the windows directory under the C drive, find the fonts folder and open it, select Install New Fonts under the File menu.

A dialog box will pop up to add a font, and the drive letter where the font is located will be selected in the drive box below. Copy the following fonts to the fonts folder and select the checkbox, press the above select all buttons, select all the fonts, and then press the OK button, so that the fonts will be installed in the fonts directory of Windows.

There are several possibilities in this way, 1 is that you set up a font system that can not be accepted by the graphics card, 2 is to erase or delete the default font of the computer in the control panel, 3 is that the font cannot be called in the installed driver, and the font source cannot be obtained at the same time, 4 is the invasion of foreign enemies, no matter what kind of situation (except for the first one) can not be directly solved, the only way is to reinstall the system, the first way to get the font is the computer - attribute - advanced - Environment variables,You delete which information to restore which information is OK,Other ways if you reinstall it still can't be displayed,That's the problem of the machine (hardware)。

I've had this kind of problem:

First re-**, and then replace the contents of the folder where the re** file is located with the things you didn't finish before. That is, replace 78% of your F drive in it (you can replace it directly), which should be fine.

You try.

Which plate is Red Alert 3 installed on? Click on that disk There is a seed Double-click the seed to continue**,As long as you Red Alert 3 is not installed in the C disk, you can,Of course, you have to install Xun Lei first,The version should be the same as the version you installed before,Don't install Xun Lei in the C disk again。

It is recommended to replace the driver N card 5 series to 7 series if you use it under XP, it is recommended to use the version, if it is 8 series or use it under Vista, it is recommended to use the version, I use these two versions, there has never been any problem, but I have changed it under XP.

Try a different driver. I think the drivers that come with the general system are rubbish, and many of them have not been officially certified.

If you have an N card, we recommend using the version.

Press DEL to enter the BIOS

Put the driver

A option, select none, F10 save exit. Restart and try.

Eldest brother. You're whole.

I see. Desktop read error: press Ctrl Alt Del to try again.

There is a good chance that your system is broken.

Find a computer to install a disk with a computer repair function and try it.

Cast the wrong clothes. will kill people.

The system is used by my Internet café! Rest assured! It's not the original, I wouldn't recommend it here!

Try it out with other games or programs!

It could be an issue with the game itself.

To make matters worse, the display is aging.

The hard drive does not read, which means that your hard drive is damaged or the cable of your hard drive is not properly connected or loose.

Mine is the same

Turn on the power and press the del button to turn off the floppy drive.

Control Panel - Language -, select Chinese Simplified and China Region in it.

It's good to use the computer company version, you choose a higher version.

This unit has a virus! Please kill the virus! This is caused by a virus file!

Try it again by choosing a desktop theme.

Install rainforest wood wind.

WinXP operating system.

It can be solved. You pm me.

I'll tell you step by step.

WinXP you can only use XP in this book.

Missing system files? Use the [360 System First Aid Kit].

Tomato Garden Edition.

Vista and XP

This version is good.

Thunderbolt is installed on the C drive, so there is no way.

I don't think the landlord doesn't know the difference between the cut and delete commands, but he just doesn't find the cut and delete buttons.

Since these two commands can be implemented with the Ctrl+X and Del shortcuts, respectively, in Windows XP, there are no commonly used buttons such as delete, cut, copy, paste, etc., displayed in Explorer.

To display these few common buttons, you can view the Toolbar custom command in Explorer. In the pop-up Custom Toolbar dialog box, select the button you want to display from the list of available toolbar buttons on the left, and then click Add to display the button in the toolbar. Select the button in the list of current toolbar buttons on the right and click Delete to hide the button.

b Delete is to delete it from the hard disk, and the cut is not there on the surface, in fact he is in the clipboard, not physically deleted.

After clicking the delete button, the file is directly deleted from the computer, and it no longer exists

And after the cut button is clicked, if you don't choose to paste elsewhere, the file will always be there.

To put it this way, 'cut' is to cut out the file, which remains in place until the paste action is made.

ls is correct, "paste" can be "cut" content copied out.

The location is in the "" drop-down menu in the "toolbar" and in the standard menu button.

The monitor is not set up correctly or the internal components are malfunctioning poorly.

The power supply capacitor of the high-voltage part has exploded.

Capacitor bulge, confuse the poor performance of the key, discharge the capacitor bulge, that is, the button, spray it with resurrection.