How to give someone else the permission of the Minecraft territory, be detailed

With a wooden axe in hand, left-click on the lowest point on the corner of your house and right-click on the highest point in the opposite corner. Then type res select size to check if your territory is correct and satisfied, and this command will also show you currently.

Money required. Enter ( res create province name) to purchase the territory, [province name is optional].

Note!! When you give permission, you must stand in the current territory, and if it is not there, please add the territory name in the space after the friend's name.

Example: res pset friend name territory name use true

res pset friend name Territory name use true Use items in the territory (including: doors, buttons, etc.).

res pset friend name province name build true in the territory to build demolition.

res pset friend name territory name container true Use the containers in the territory include: chests, stoves, dispensers, etc.

These 3 kinds of long commands are enough, if you want to cancel the other party's permission, change the last true to false.

build: Sets whether the player can build and demolish in the province (if false, the player will not be able to build and demolish).

use: Sets whether the player can use items in the territory (including: doors, buttons, etc.) (if false, the player will not be able to use things).

container: Sets whether the player can use containers in the territory, including: chests, stoves, dispensers, etc., if false, the player will not be able to open them.

TP: Set whether the player can teleport into the territory (if false, the player will not be able to teleport into the territory] [not set yet].

admin: Set whether the player can modify the flags in the territory [false by default] [cannot be set yet].

flow: Sets whether the liquid can flow [false by default].

PVP: Specifies whether to enable PVP

TNT: Specifies whether TNT can be illuminated in any way.

creeper: specifies whether creeper can be used.

ignite: If false, it will not ignite.

firespread: If false, the flame will not spread.

Subzone: Sets whether players can build subzones

bucket: Sets whether the player can use the bucket.

place: Sets whether the player can place items separately (setting this will override the build flag).

destroy: Sets whether the player can destroy items separately (setting this will override the build flag).

piston: Sets whether the piston can be used.

You can call out the dialog box in the game (the default is the "T" key) and type res pset territory name player name trusted true and send it, you can give the player full permission, I hope it can help you.

In the in-game dialog box (the default is the "T" key), enter res pset province name player name trusted true and send it to give the player full permissions.

For example: res pset friend name Territory name use true

res pset friend name Territory name use true Use items in the territory (including: doors, buttons, etc.).

res pset friend name province name build true in the territory to build demolition.

res pset friend name territory name container true Use the containers in the territory include: chests, stoves, dispensers, etc.

The player is a character operated by the user of the game and is often considered the official protagonist of the game. There are 2 types of players, one is the default player, which is the male Steve, who can be used in the game as any person, such as being an adventurer, miner, warrior, or robber. The other initial ** is the female Alex, which is usually the initial default character in the version.

Both of these two are generally representative of humans, although the player can change them through customization.

/res

The name of the pset collar.

Player name. trusted

true to other offices.

res pset your name use t this is the permission to open the box res pset your name container t forgot. res pset your name build t build permission attached! What prevents others from coming in is res set move f

Enter the name of the op player in the reply field.

That's it, remember, there's a space after the op.

It is the latest version of NetEase Minecraft game that makes it the easiest way for players who are connected to themselves to get permission (in addition, you need to go to the settings bar to enable cheating).

Minecraft's instructions for giving permission to others are as follows:

1. Give the player administrator permission: op player ID

2. Remove player admin permissions: deop player id3, whitelist add player id4, remove whitelist from a player: whitelist remove player id

5. Ban a player: ban player ID

8. General operation to give player permission: manuaddp player ID permission name.

Instructions are required to use the command, and the instructions for Minecraft to give permission to someone are as follows:

1. Give the player administrator permission: op player ID

2. Remove the player administrator permission: deop player ID.

3. Give a player a whitelist: whitelist add player ID.

4. Unlist a player: whitelist remove the player ID.

5. Ban and repent of a player: ban player ID.

8. Give the player permission to use the operation instead: manuaddp player ID permission name.

A few other commands commonly used in Minecraft:

1. Gamemode 0 1 3: Change the game mode, 0 corresponds to survival mode, 1 corresponds to creative mode, and 3 corresponds to observer mode.

3. TP X Y Z: Teleport yourself somewhere, e.g. TP 235 70 326, i.e. teleport yourself to a location with x coordinates 235, y coordinates 70, and z coordinates 326.

4. Weather Clear Rain Thunder Storm Sun: Change the weather command, clear means rain stops, rain means rain, thunder means thunderstorm, storm means snow, sun means sunny.

respset collar Hongchang place name player name trustedtrue" and then send, it is hidden that you can give the player all permissions to give the player full permissions, suitable for lazy people.

If you want to give access permission, you need to enter "respsettongxueadmin1movetrue".

Is it to give permission or to give permission to chain off, or to cancel the permission silverprint? There is a player who calls 123 anhydride for permission, click on permission to call and give 123 anhydride, cancel permission, or click on permission, and then click cancel permission.

1。In fact, after each player encloses the land, the system defaults to all players, all of whom have the permission to teleport and move, so we need to stand in the ground and enter commands.

2.The command is: res set [name ID] move true or false, here because the system is on by default, you can turn it off and turn it on.

3.Turn off everyone's moves, use plotme undeny *turn on Use plotme deny*

4.Finally, enter the PlotMe Deny player ID to turn the move permission back on.

Minecraft's instructions for giving permission to others are as follows:

1. Give the player administrator permission: op player ID

2. Remove the player administrator permission: deop player ID.

3. Give Bai a player a whitelist: whitelist add player ID

4. Unlist a player: whitelist remove the player ID.

5. Ban a player: ban player ID

8. General operation to give player permission: manuaddp player ID permission name.

Extended Knowledge:

A few other commands commonly used in Minecraft:

1. Gamemode 0 1 3: Change the game mode, 0 corresponds to survival mode, 1 corresponds to creative mode, 3 corresponds to observer mode;

3. TP X Y Z: Teleport yourself to a certain place, for example, TP 235 70 326, that is, you have teleported yourself to a position with x coordinates of 235, y coordinates of 70, and z coordinates of 326;

4. weather clear rain thunder storm sun: change the weather command, clear means rain stops, rain means rain, thunder means thunderstorm, storm means snow knows the day, sun means sunny;

5. setblock x y z block ID: Set the block at a certain position, x, y, z represent the coordinate position of the block, and different block IDs correspond to different blocks.

If you want to set up multiple homes, you can actually use sethome home name to create another home, if your teleportation permission is turned off, and you want only you to enter, please res pset the territory name your name tp true. If you want everyone to be able to tp, res set the territory name tp t.

In the chat box, type: res set territory name tp t

Go into your territory and type res set tp t

Enter the command res pset province name your name tp t

Only I can teleport to my own territory, and others can't open the territory's teleportation permissions.

2. Enclosure (enclosure is synonymous with the resident plug-in, which can protect your territory from being destroyed by others).

First, left-click on a dot: the following text will appear.

3. Then another point, right-click, and the text "Second Selection Point" appears.

4. Then, type res create the name of the place you want.

You can make all the blocks within a two-point radius become your territory (which cannot be placed or destroyed by others).

5. If you don't like the land, you can use the name of the res remove land to remove the land.

6. Enter res confirm to confirm the removal.

Explanation: TPA: When you want to teleport to another person; Use TPA to get another person's ID. The other party needs to type tpa accept before you can teleport to the other party.

1. Open the [Minecraft] game on your computer.

2. Then find the [T] key on the computer keyboard and click it.

3. In the input field that appears, type: [Gamemode].

4. Enter 1 at the end, which is the creative mode.

5. Then, enter the name of the player you want to give permission to after GameMode 1.

6. Then press enter to send the command.

7. Finally, the instruction to give authority to others was completed.

First of all, if you are OP in the server, enter the OP player name in the game, or you can enter the OP player name in the command line of the server to give a player OP permission, but first you need to be OP, or you open the server

Enter the op player name in the game, or you can enter the op player name in the command line of the server to give a player op permission, but first you need to be op, or you open the server.

Command: mangaddp builder

mangaddp builder

mangaddp builder

Add it before the instruction yourself

Territory: res pset player name Permission name t (standing in the province) res pset player name trusted t (give a player full permissions) Territory: p add player name (only have permission when the province owner is present) p trust player name (full world permissions).

Server op:

OP Player Name (needs to be the highest privilege group or OP or Backend) LWC Box Lock:

cmodify the player's name.

Then right-click or left-click on the box.

Brand Lock: Right-click or left-click the chest.

Lockette player name.