The problem of automobile sheet metal spray paint, how much is a surface of automobile plate metal s

Depending on what kind of car it is, there must be a color difference, but the color difference with good paint mixing technology will be relatively small.

Let me answer you: the process of car paint is more cumbersome, the first step is to scrape the bottom ash (also known as coarse ash), and then start to grind after drying, and at the same time the workers should do a good job of the arc and water chestnut of the damaged part of the model (this is more critical). The second step is to scrape the fine ash, smooth it after drying, and then use an air pump to dry the water (make sure it is dry) and then stick the newspaper and cover other places that do not need to be painted.

The third step is to apply the primer, and after applying, the worker should carefully check for air bubbles or trachoma, and if there is one, turn back to the second step. The fourth step is to start painting, after spraying varnish (the quality of varnish also determines the brightness and time shelf life of the paint surface of the car in the future), the more times the varnish is used, the better, at least 2 times.

Answer your questions one by one.

1. You can't see the quality of the paint you tune, so you can only ask him in advance what brand of paint and varnish he uses.

2. Repair the rotten place, remember to remind him that the reverse side of the repair has to be anti-rust paint (it is best to ask him to use the iron sheet) 3. The whole process is nothing more than to reduce the process I just said, or take low-grade paint.

4. It is worth noting that you have to negotiate with him before painting, the color must be accurate, or you have to refuse to pay. Hey.

Automobile sheet metal is generally calculated by face**, and because the sheet metal will be painted, it will change according to your requirements, it is recommended to go directly to the store for consultation.

Automobile sheet metal (metal plate) is a technical means of automobile repair, in this regard, automobile sheet metal is equal to automobile sheet metal repair, which refers to the repair of the car body after the collision, that is, all the rest of the work except for the anti-corrosion and decorative spraying of the body. Such as the analysis of automobile body damage, the measurement of automobile body, the shaping of automobile body sheet metal, tensile correction, stress relief welding, and the assembly and adjustment of automobile body accessories.

Automobile sheet metal is a processing method for automobile maintenance, also known as cold work. To put it bluntly, if the appearance of the body is damaged and deformed, the process of sheet metal is required.

Automobile collision repair has developed from the original "smashing, pulling and welding repair" to the secondary manufacturing assembly of the body. The repair of the collision accident vehicle is no longer a simple knocking on the sheet metal of the car, and the quality of the repair cannot be observed by the naked eye alone. Maintenance personnel should not only understand the technical parameters and dimensions of the body, but also master the characteristics of the body materials, the transmission of the characteristics of the force, the deformation trend and stress points of the body, and the production process of the body, such as welding process.

On the basis of mastering these knowledge, maintenance personnel should also use advanced measurement tools to judge the direct and indirect damage and deformation of the body through accurate three-dimensional measurement of the body, as well as the hidden dangers due to the deformation of the body, and formulate a complete body repair plan, and then cooperate with the correct maintenance process and accurate three-dimensional data of each key point of the body, restore the key points of the body to the original position, and restore the damaged body to the state when it left the factory.

To put it simply, if the vehicle has an accident or the sheet metal parts fail, the sheet metal repair and painting are required, which is the requirement for the appearance and structure of the vehicle to be restored to the factory.

Divided into places, it is generally between 400 and 800 if it is flat!

Hello, nice to meet you. I'm Xiaomo, an auto repair consultant. With 15 years of experience in automobile maintenance, he is currently working in FAW-Volkswagen, one of the world's top 500 state-owned enterprises, with a senior certificate for automobile maintenance and a certificate for auto beauty technicians, and is familiar with the detailed configuration of major brands of vehicles, and has provided comprehensive automobile repair and maintenance consulting for tens of thousands of customers.

We are typing the answer by hand, so please be patient for a while. I'll give you a solution in a few minutes, thanks! ❤️

The general sheet metal spray painting 4S shop is about 600 yuan, the professional sheet metal spray beauty shop is about 300 yuan, and the roadside shop is about 150 yuan. If you do not take insurance and repair at your own expense, it is recommended to go to the sheet metal spraying beauty shop for spraying, and the quality ***** is much lower than that of the 4S shop.

Question: Hello master, how much does it cost to repair this scratch 19 Magotan 330 Prestige.

Because you've got a dent.

Question: This depression is the way this car is supposed to be [covering face].

Is this dirt or depression.

The question is to say that this repair in the 4S shop is about 500, right, does this repair need to be painted with sheet metal on the entire surface?

Let the entire surface be painted.

It is different for each place, each model, repair shop, and 4S shop.

It depends on what kind of car and how big it is.

Generally, sheet metal painting is different in 300 to 600 pieces.

It depends on where the 4S shop is definitely expensive but the quality is guaranteed.

Sheet metal has an impact on the car.

First of all, we should understand the definition of sheet metal: sheet metal, a processing technology, has not yet had a relatively complete definition. According to a definition in a foreign professional journal, it can be defined as:

Sheet metal is a comprehensive cold working process for metal sheets (usually below 6mm), including shearing, punching, cutting, compounding, folding, riveting, splicing, forming (such as automobile body), etc. Its distinctive feature is that the thickness of the same part is the same.

Generally speaking, after the deformation of sheet metal, it must have an impact on the car, and the shaping machine must be polished, which affects the thickness of the iron sheet, and the anti-rust treatment behind the sheet metal surface is not burned off.

Relatively speaking, it is divided into parts of sheet spraying.

Generally, the replacement of the rear bar anti-collision beam and the front bar anti-collision beam and the sheet metal spraying of other parts may be defined as a rear-end collision or rear-end collision, but if there are obvious sheet spray traces in the position of the front longitudinal beam and the rear wall position, it will generally be judged that the accident of this car is not small (in fact, it is not big).

The roof part is resolutely not sprayed, because it is the most direct support plate in the car, and if it is sprayed, it will prove that he has rolled. Many second-hand car appraisals or car owners, pull open the four-door sealing strip to see if there is any obvious color difference between the interior paint and the exterior (a small amount of color difference is there), if there is, the jargon is called wearing a coat, that is, the whole vehicle has been dismantled and sprayed.

Four-door sheet painting is the easiest to ignore, and slight scratches may be painted. However, it is necessary to pay attention to the front spin not to have signs of new gluing, and the glue from the original factory can be distinguished from the back, indicating that the suspension system and driving system should be seriously damaged near the top of the tower before the problem occurs.

In fact, whether it is a car that is going to be sold or a car owner who wants to buy a car, find a really qualified repair shop (not a shop) to do fine repairs, and put it aside if you can't see it, at least there is no problem with rigidity and normal driving.

If the painting environment and technology are not good, it will lead to the deviation of the color of the painted parts of the car. Under normal circumstances, the paint surface that has been painted by sheet metal painting can be used for 5-6 years, but the premise is that the place of painting must be regular, if you go to an informal auto repair shop for sheet metal painting, it will have a great impact on the paint surface of the car.

Sheet metal painting has no effect on the vehicle. It is recommended to go to a regular auto repair shop or 4S shop. Don't worry too much.

Car sheet metal painting is very common. The main impact on the car is the paint, that is, there may be a little color difference after the painting is completed.

Hello, car sheet metal painting is very common, this has no effect on the car as a whole, don't worry.

This sheet metal is carried out after scratching, and it needs to be painted after the sheet metal is finished, and the paint surface itself needs to be removed.

This motor vehicle sheet metal paint should have no effect on the vehicle, this is just a modification of the appearance, this actually doesn't matter.

Hello. If the car is painted with sheet metal, it will have no effect on the performance of the car, so you can rest assured.

It is normal for the car to be touched and painted in sheet metal, generally you only need to go to a professional repair shop or 4S shop to find a master to get it without much problem, I hope it can help you.

Hello, this generally has no effect, and it doesn't have a particularly big impact on the paint finish.

This must have an impact, there is a problem with the car paint after the sheet metal, and it needs to be repainted, and the sheet metal is transformed into a steel plate.

Hello, this has no effect on the performance of the car, unless it is the frame sheet metal painting, which may affect the stability.

Generally, if the technician's skills are relatively mature, there is basically no big impact, and you can use it with confidence.

There is no impact, for example, if you encounter an accident, the paint rubs off or is deflated, you can only do sheet metal spray painting, which must be dealt with, and it is very ugly not to deal with it.

As long as the regular store is finished, then it can be repaired, and there is no difference from the original.

How to say this problem, if the car is fine, I didn't go to the car sheet metal, and the car has to be repaired by the sheet metal in the painting.

White paint is more difficult to repair:

If the sheet metal is not done well, the substrate will not be handled well, and the paint will be difficult to spray, so the sheet metal and substrate technology should be good, which is the same premise.

White also depends on whether it is plain paint, or pearl white, pearl white is the kind of white that looks like a milky color, this kind of car paint is difficult to spray directly, it needs to be sprayed excessively, and at the same time there are extremely high requirements for color mixing, many 4S stores dare not guarantee to do a good job. Plain white is slightly better to spray, but the white car paint must be painted with *** paint, otherwise it will be easy to change color after a long time.