The piano s sustain pedal is broken 5, and the piano s sustain pedal is broken

What brand of piano are you? It's been a long time, right?

Most of the keys can't get up because of moisture, the moisture-proof pipe is plugged in for a few days, and if you pedal, you can open the lower door panel and see it, and you can solve it.

These problems can be solved by an experienced lawyer, the lawyer does not have to be old, as long as there is a level, if there are any questions, please go to the "piano piano" to consult!

This is a minor problem, the reason is that the vibration of your piano during the handling process causes the sustain pedal ejector rod screw to loosen and lengthen the pedal distance, as long as the pedal ejector rod screw is tightened to shorten the pedal running distance.

Let's find a lawyer and see if the pedal stick has fallen. This should be an easy problem to solve! As for **, it depends on what your local lawyer fees are, if you have any questions, you can ask me again, I am also a lawyer

It's best to find an older, more experienced, better tuner, about a hundred to two hundred.

There's not much money, as long as it's not broken, it's probably only the money for one tuning, buddy, you're stepping on it too hard! Admire, what kind of tune makes you step on it so much.

There may be the following reasons why the piano sustain pedal is not working:

1.If the pedal is not properly connected to the piano or damaged, you can check that the pedal is properly connected to the piano and make sure that the socket is not loose or damaged.

2.Power supply problem, if the electric piano is not connected to the power supply or there is a problem with the power supply, the sustain pedal buried opening plate will not be able to use normally.

3.If you have a problem with the settings, you can check whether the electric piano is turned off and the sustain mode is turned off, or if there are other settings that prevent the sustain effect from being displayed. You can consult the manual for electric pianos to learn how to adjust and set the sustain effect of the keys.

4.Screw issues, if the screws on the sustain pedal connecting strip are loose or misscrewed, it can also cause the sustain pedal not to work. The underneath plate can be opened, and the screws on the sustain pedal connecting strip can be checked and tightened.

5.If all of the above causes are ruled out, you may need to see a tuner for inspection and restoration.

During the inspection and repair process, care should be taken not to disassemble the piano parts at will, so as not to cause damage or affect the warranty of the piano. It is recommended to find a professional tuner to handle it.

Piano pedals. Broken maintenance method.

Piano pedal failures are generally minor faults, roughly as follows: the pedal does not respond when pressed, the pedal does not come back, the pedal is pressed and there is noise, and the keys are not on the same plane when the pedal is pressed, so you can check it in this order.

1. Open the lower door, top cover, and upper front door.

You can see that there are 3 sets of linkage devices on the 3 pedals, press the pedal with the problem, observe whether the linkage device has action step by step, no action is the connecting rod slip wire or nut is off, the action is normal and then check the adjustment screw, distinguish which of the following is the fixing screw and which is the adjustment screw, and the adjustment can generally be solved by adjusting it several times.

2. There is a creaking sound when the piano pedal is pressed, which belongs to the mechanical friction sound, find the part that makes the noise, see if there is any deformation, and you can also put some lubricating oil.

3. The piano pedal is not in the same plane when the piano pedal is stepped on, which is caused by the large angle of the climbing wire or the inconsistent length of the climbing belt, please ask the piano tuning lawyer to solve it.

There are two possibilities, one is that your piano is no longer in tune, causing the illusion of sustain, or even sounding like an electronic keyboard.

sound, sound trailing prolonged. The second is that the sustain pedal connecting rod can not be detached, the solution, please tune the lawyer to tune the piano, and solve the sustain pedal problem.

Summary. You can step the pedal to the corner to keep the pedal in the state of being stepped on, so that the feet can step on other pedals, the main function of the muted pedal is to reduce the sound, because the sound of playing the piano at home is very loud, so the middle pedal of the upright piano is called the muted pedal, if your piano is an upright piano, you may as well try to push the pedal to the right, and the pedal will be restored.

What should I do if I can't get back when I press the sustain pedal of the piano?

You can step the pedal to the corner to keep the pedal in the state of being stepped on, so that the feet can step on other pedals, the main function of the muted pedal is to reduce the sound, because the sound of playing the piano at home is very loud, so the middle pedal of the upright piano is called the muted pedal, if your piano is an upright piano, you may as well try to push the pedal to the right, and the pedal will be restored.

Hope it helps.

Summary. Hello. There is no problem with the pedal, and when connecting the pedal to the electronic organ, it must be done when the power is not connected, and then turn on the violin after it is connected.

It's okay if this happens, just plug it back in once after shutting it down. It is likely that the sustain pedal is broken, and the sustain principle is to let the timpani sponge out of the strings in the case. You pedal first to feel something unusual.

If you're a benchtop piano, open the lid at the top, turn the peg from both sides, and remove the front bezel. You step on the pedal again to try the sound, the timpani sponge, and the condition of the strings is clear at a glance. If it is a grand piano, it can be observed by opening the lid directly.

Hello. There is no problem with the pedal, and when connecting the pedal to the electronic organ, it must be done when the power is not connected, and then turn on the violin after it is connected. It's okay if this happens.,Just plug it in again after shutting it down.。

It is likely that the sustain pedal is broken, and the sustain principle is to let the timpani sponge out of the strings in the case. You pedal first to feel something unusual. If you're playing a desktop piano, open the lid on the top first, turn the lid from both sides, and then remove the bezel on the front side.

You step on the pedal again to try the sound, the timpani sponge, and the condition of the strings is clear at a glance. If it is a grand piano, it can be observed by opening the lid directly.

Hello, the electric piano will not have a sustain preparation grandson without imitating the return chain and stepping on the sustain pedal. The sustain pedal is an important component of the electric piano, which can make the tone polish continue to be extended, making the sound more colorful. If you don't press the sustain pedal, the tone of the electric piano will disappear immediately, and there will be no sustain effect.

My electric piano just has sustain when I don't step on the sustain pedal, so I asked what happened.

An electric piano, not a piano.

The function of the sustain pedal is to prolong the duration of the tone. According to your description, even if you don't press the sustain pedal, the tone of an electric piano still has a sustain effect, which may be due to several reasons:1

Piano settings: Some electric pianos may have a certain sound extension effect, even if you don't use the sustain pedal before the circle, there will be a certain length continuation. This can be done to control the sustain effect through the piano's settings or sound adjustments.

2.Environmental factors: Some electric pianos may apply digital effects to their performance, such as reverb effects, which give the sound a certain sustain effect.

3.Technical malfunction: It is also possible that a component or system of the electric piano has malfunctioned, resulting in the sustain effect not being properly controlled.

In this case, it is recommended that you find a professional maintenance personnel to help repair and solve the problem. Overall, if you have questions or problems about the sustain effect of an electric piano, it is best to contact the manufacturer or after-sales service department of the electric piano, they will provide more detailed and professional answers.