-
1 The computer should be kept in a clean room. Dust can adversely affect almost all parts of a computer, shortening its lifespan or affecting its performance.
2 The computer should be placed in a spacious space, and the heat dissipation space should be reserved around it, and it should not be mixed with other sundries.
3 Magnetic fields are strictly forbidden around the computer. Magnetic fields can have a serious impact on displays, disks, etc. Try not to place the speaker near the monitor, and do not place the disk on top of the speaker.
4 Do not place a teacup on the computer desk, let alone place it on the main unit, monitor, or keyboard, once the water is spilled, the consequences will be serious.
5 Do not move the main chassis or expose it to shock and vibration when the computer is working, which is a very dangerous action for the hard disk.
6 The hard disk should not be suddenly shut down or powered off when the disk is being read. If the voltage is unstable or there are frequent power outages, you can buy UPS to deal with it.
7. In the case of a dry environment, you should beware of the influence of static on computer accessories. If you need to make direct contact with the circuit board, please first discharge yourself (e.g., touch the water pipes with your hands, etc.) or take other insulation measures (e.g., wear grounding gloves).
8 Do not plug and unplug various accessories or interfaces in the power-on state (except for devices that support hot swapping), otherwise, it may cause serious consequences of burning the relevant chips or circuit boards.
9. Dust the power supply, optical drive, floppy drive, chassis interior, monitor, keyboard, mouse, etc. should be cleaned regularly. If it is not convenient to deal with it yourself, you can ask a professional to do it. However, you should know that there is a high-voltage circuit inside the display, so you should not act recklessly.
10 Do not wipe the monitor screen with alcohol or laundry detergent, you can use clean water if necessary, but the water must be adsorbed on a paper towel or rag, and do not allow clean water to flow into any accessories.
11 Do not turn on and off frequently, and turn on and off the machine at a time of a few moments.
12 Do not mix conductive bodies such as screws into the chassis, otherwise it is very easy to cause a short circuit of the board in the chassis, which will cause serious consequences.
13 Keep the driver CD-ROMs and manuals of various computer boards and peripherals, especially the motherboard manuals.
14 Do not use the optical drive for a long time, such as listening to songs, watching DVDs, etc. You can copy songs, DVDs, etc. to your hard drive to enjoy them.
15 If the computer is not used for a long time, it is recommended that you turn it on and run it regularly to expel the moisture in it.
Hope it helps! 88
-
Maintenance includes 2 aspects: 1. Hardware It is recommended to clean the host regularly, 2. Software is recommended to clean the system regularly, and if you have the ability, you can reinstall the system regularly.
-
Optimize from time to time, you can go to the next optimization master, according to the optimization mentioned in it, it will teach you to delete junk files, etc., and there is a common disk fragment cleanup, which can also speed up.
-
Pay attention to the cleanliness of the main unit and the reasonable use time.
-
1. Clean the monitor, keyboard, mouse, and the exterior of the chassis every half month.
2. Clean the inside of the chassis once a month, and use a hair dryer to blow the floating dust in the chassis.
3. Check the motherboard every three months, including a thorough cleaning of the motherboard, and clean the power fan. You can pull out all the cavities of the onboard card, wipe the gold finger with an eraser or RMB, and use the circuit board cleaning spray to clean the motherboard (available in the tech market, like a sprayer like an exterminator, but the tank is smaller). Finally, all parts can be put back in place.
Be sure to pay attention to the various connections on the motherboard and make the identification in advance.
4. Clean the power supply fan once every six months (including the internal sanitation of the power box).
5. Reapply CPU silicon once a year. Be careful not to be too thick.
-
Clean up the dust and turn off the power.
-
First of all, no matter what kind of electronic product it is, electronic components have a lifespan.
Secondly, generally using less, or not using it at all, will prolong the life of computer hardware.
Finally, if you don't use it, then what's the use of buying it, it is recommended to use it if you want to. You can use it with confidence during the warranty period.
-
Keep the environment where the computer host is located clean and hygienic, the more dust-free the better, and the more constant the temperature and drier, the better. Do not get wet.
Even if you don't use it for a long time, you have to turn it on often for a while.
Clean the host frequently and dust.
Do not shut down the computer abnormally, such as power failure, forced shutdown, etc., do not browse web pages that are easy to be poisoned, and do not click on unknown links.
When selecting host hardware, the power rating of the host power supply cannot be lower than the overall hardware requirements, which can extend the life of the host.
-
Computer maintenance method and frequency:
1. It is best to go to a computer store or repair shop to clean the fan once a year (if possible, every six months), because the fan dust will affect the running speed of the computer.
2. It is best to carry out disk defragmentation and disk cleaning on the computer in an average of one month, clean up some junk files generated by the operation of the computer, prolong the life performance of the hard disk, avoid the occasional use of the computer, reduce the number of machines, and reduce environmental dust.
3. It is best to clean up the garbage and disinfect the computer once a day, and you can do it while playing with the computer, and you can use ordinary computer security software to disinfect and clean up the unwanted surface garbage.
4. You can buy some computer cleaning kits, which are generally available in computer stores, and clean the surface of the computer from time to time, and do not use detergent and water rashly, which will damage the computer.
5. Remember to turn off the computer when you are not in use and let the computer rest and rest.
-
Generally, if the use environment is dirty and messy, it is better to regularly dust the inside of the case.
-
In addition to regular cleaning of the hardware, maintenance should also be done on the data in the computer"Clean"Job.
How long is the right time to leave the computer on every day?
In fact, how long it takes is not a big problem, think about it, those servers are not working well all year round? As long as it's not for a long time, it's nothing (after all, yours is not a server, and the stability is poor).
Is the main buzz of the computer console coming from the fan?
Yes, there are power fans and CPU fans, and there is the issue of the chassis. Because if the chassis is very thin (go look at the expensive chassis, you will know), the materials are insufficient, and after a long time, the chassis will follow the power supply and CPU fan"Exercise"While"Exercise".
And hard drives are the most afraid"Exercise"When reading the disk at high speed, it will hurt the platter and the head, and it will strike. Moreover, the motherboard will also deform over time, and then, the memory will be pulled poorly, and so on.
So, in addition to the good main accessories, the seemingly inconsequential chassis is essential for the stable operation of the machine (good working environment).
Be. I don't need to say more.
One last question:
How should I take care of it?
Let's talk about cleaning up the inside of the chassis first, now there are all the tools to buy cleaning, go buy a set. Actually, there is nothing to say, just to remove the dust. (But be careful, before cleaning, touch the metal object to remove the static electricity from your body, because motherboard, CPU, hard drive.)
Are afraid of static electricity, don't lose a big one because of a small one! )
Do the work on the data in the computer"Clean"Work, choose"Get started"Procedure"-"Attachments"-"System tools"-"Disk Cleanup"with"Disk defragmentation".Don't use it too often, just once every few months, because when cleaning up, it is reading the data of the hard disk at high speed, and too many reads ("Disk defragmentation"for a long time), which will reduce the speed of the disk reading.
This should be a hardware failure.。。
WLAN is a wireless service, and the computer needs to be equipped with a wireless network card. >>>More
To improve the quality of sleep, it is necessary to carry out from the aspects of work and rest, diet, exercise, and environment. The details are as follows: >>>More
After the assembly machine is assembled and running normally, the technician will partition and format the hard disk of the computer, and then install the system, hardware driver and common software, when it is handed over to the customer, the computer may be used normally, and the customer should carry out the following checks and tests after receiving the computer to ensure that the computer is suitable for the customer's use >>>More
Let me tell you a tip: if you are familiar with any field, pay attention to this field, and then have more bounty points, if you are selected, you can get more wealth, hehe. >>>More