What board should I choose for such a configuration

I just got a computer for my colleague a few days ago.

The situation that day was like this: I was going to give my colleague such a configuration--- AMD5000+ Panzheng Chao Handiapper AK790GTR, Red Veyron DDR800 1G X2,. Later, I went around in the computer city.,I found that there are not many shops that sell Panzheng.,Considering that colleagues don't have too high requirements for boards.,The most important thing is stability.。。

I picked ASUS's M3 (I forgot the model, anyway, it's ASUS's blackboard, 560 chip.) **It's 630,**It's 660).。。 I looked at this board.,I really like it.,The workmanship is no worse than ASUS's.,The one-piece pure copper conduit is very beautiful.。。

The enclosed capacitor is also very stylish (I believe that the effect will not be bad). The only regret is that there is only one interface for the IDE.。。。 But now it's all SATA interfaces.,As long as it's a small socket.。。

So the importance of the IDE interface is reduced... Overall, I like this board very much, and if you go for overclocking, this one is very suitable! It's true..

And to say:The packaging of this board is also very beautiful.,The shell is very large.。。 Oh, it's more classy.

And the promotion faltal that you mentioned yourself, this board is also good. It's also quite suitable for overclocking.。。。 It depends on personal preference... You'd better go to the computer city...

Finally, one last point: Shengji and Panzheng are both brands specializing in the DIY market. The workmanship and design are good!!

Why not get a better graphics card?

If so, I can only recommend the Jet Wave Hummer hao03, which is the only 790x board under 800 yuan.

You can consider this motherboard as it should be a good choice for you

Rest assured to click on Yingtai's official **

Chipset: I personally think you can't go wrong with choosing P45! Brand and**You choose it yourself (now it seems that Yingtai tpower i45 has a good reputation, but I don't know if it's because there are too many water stickers on the Internet).After all, I haven't used it.,My friend installed it the day before yesterday.,It's ASUS P5Q.,It's said to be okay.,LZ can refer to it.。

As for the hard drive, why not choose the 320G7200 11 16M? After all, the cache is twice as high? It's less than 100 yuan more expensive and CPU, I personally think E8400 will be a better choice.

The Q6600 is the low-end of the quad-core, while the E8400 is the high-end of the dual-core. It exceeds Q6600 in both bus frequency and external frequency, and the manufacturing process is 45nmPersonally, I think the efficiency will exceed Q6600

It is not recommended to use P45 without overclocking, P35 or P43 is enough, and you can't feel the gap without overclocking.

MSI P43 Neo3-F 799

ASUS P5QL Pro 788

The performance of these two boards is about the same, both are P43 platform, enough to match the E7200 without overclocking, absolutely no problem.

It is recommended to use Seagate's hard disk, after all, it is the world's first hard disk manufacturer, not Hitachi's comparable 350W power supply is enough, but in order to facilitate future upgrades, it is recommended to use 400W Anything else.

MSI is not second-line, and now the motherboard technology is stronger than ASUS! Having said that, these three boards should first exclude MSI P43, because ** is too unkind. The P43 chipset is cheap.

Although you are using an N card, there is no need for a P45 firefight, but the disk performance of the P45 is still slightly stronger, and there is a disk array, which can be used for two hard disks in the future (in fact, it is not very useful). If you think that P45 is really useless and you want to use P43, you can change it. And then to say that both of these P45s are pretty good!

It's in different price segments, so you can't compare too much. The performance is almost the same, MSI hardware is more affordable, and ASUS software has more added value. If you don't overclock, it's actually quite sufficient.

So go for the cheaper MSI. The 350W rating is definitely enough, and it is the Great Wall with no shrinkage capacity, rest assured!

MSI is a first-line board, and the world ranking is ahead of ASUS. Yes first, ASUS fifth, you better use Gigabyte board, better stability, electrical performance is also more powerful, recommend GA-EP43-DS3

350w is enough, but in order to upgrade in the future, it is better to use 400w, if you are not ready to upgrade, this will do.

The chassis is a better point, the case with good heat dissipation can better ensure the stability of the machine's operation, if you are ready to add memory, just like that, if you don't add it, use 2 1G to form dual channels, and the performance is better than one.

The rest is no problem, if you have to use what you said, choose the P43 Neo3-F with heat pipe ring heat dissipation, **not high, the performance is enough.

Recommend MSI P45 Neo3-FR. Good value for money. MSI is a silver line. The 350W power supply is sufficient. The graphics card I chose is not very good, and it is not the same grade as the CPU. Recommended: 4850 or 9800GTX+

The power supply is enough, these three boards are good, it depends on your budget and hobbies.

ps: When did MSI fall to the second tier --

Choose P43 neo3-f, look at that image, it's comfortable.

The GIGABYTE MA770 series, UD3 or GA-MA770T-US3, etc., are compatible with DDR3 memory.

**The price is 699, don't care about the ocean of dozens of yuan, you can start with 600 yuan.

This one needs to be compared with each brand with high-end and high-grade products to choose one that you can accept**, and then compare it with such as chipset pairs. Motherboard nforce8m-a GraphicsColorful 8188GT 888m MemoryApacer 888 8G *8 HDD 81G is too garbage. Running Vista is very streaming.

CPU buy Intel Kurr dual-core is better, motherboard Onda latest version is the best!

MSI or Gigabyte P43 can be used, and then the high-end point can choose the P45 chipset.

I have the same configuration as you, using the ASUS P5Q, which is very stable and cheap only about 800.