What should I do if my Apple 6 can t connect to WIFI after resetting factory settings?

Change the DNS and try it.

1.First of all, check if the wireless router is working properly, you can use other mobile phones or digital products to connect to it.

The wifi signal, if you can connect and surf the Internet normally, then generally speaking, this router can work normally.

2.The phone is turned on the hibernation state to turn off the network, check whether the phone is enabled to turn off the network in the sleep state, the phone will be disconnected after a period of time or cannot receive the background chat software, the possible reason is that the phone is turned on the function of hibernation and turning off the network by mistake.

3.If you use the router for a long time, the router may freeze the phenomenon, just restart the wireless router, the authentication type is not suitable, try to change the authentication type of the router and choose security.

wpa2-psk”

The type mode is good, and the following encryption algorithm is best chosen.

AES", the mobile phone or router network settings are abnormal, consider restoring the router factory settings and cellular network settings.

There are several situations in which the Apple mobile phone cannot connect to wifi normally: 1. Confirm the wrong password entry solution: check whether the password is entered incorrectly or the characters filled in are case-sensitive, and the number of digits entered in the password is too long or too short, and there may be too many wireless network users connected, try to connect later; 2. The solution to the problem of not finding the wireless signal:

The wifi signal is set to hidden, you need to contact the network management to get the wireless signal name, in the mobile phone [Settings] - [Wireless LAN] or [WiFi] - [Other Network], manually enter the wireless signal name and password connection, if you still can't connect, you can enter the phone's [Settings] - [General] - [Restore] - [Reset Network Settings] (This will reset all network settings, including Wi-Fi passwords, VPN and APN settings, Please make sure that the phone is unlocked, not jailbroken, and can be turned on and off normally); If the router is faulty, try restarting the router; 3. Prompt connection to wifi is rejected solution: The router device may have turned on wireless MAC address filtering, it is recommended to contact the network management to add the MAC address of the mobile phone. The MAC address can be viewed in [Settings] - [General] - [About This Mac]; The router is faulty, try to restart the router; 4. After entering the password, the verification failure solution is prompted

Go to your phone's [Settings] - [Wi-Fi] or [WiFi], tap [i] on the right side of Wi-Fi, and then tap [Forget this network]; 5. After entering the password, it prompts WPA2 PSK to protect Solution: This prompt is caused by the incompatibility between the mobile phone and the router encryption mode, contact the network management or set the router encryption level through the computer to reduce the WPA WEP level to WPA WEP level, and connect again; If the router is faulty, try restarting the router;

After resetting the network settings, the iPhone needs to reconnect to the wifi, and after the connection is successful and the password is entered, the next time it will automatically connect to the wifi that has been recorded.

Answer: 1. If you can't access the Internet, please try to turn off and restart; Please check whether the maximum flow rate threshold for this month has been reached; Please check whether your phone settings mobile data is turned on; Set the mobile data option APN and whether the name is set to 3GNET.

2. If you still can't access the Internet, it is recommended that you troubleshoot in the following ways:

Check whether there is a network, it is recommended that you can use it in a place with a strong signal;

Check whether there is still a credit in the account, if the balance is insufficient, you need to recharge before you can use it;

Confirm whether the parameters of the mobile phone have been set;

Check whether the USIM card is inserted, if it has been inserted but still cannot be used, it is recommended that you go to the business hall to check whether the USIM card is faulty, or replace the card for testing;

Check whether there is a problem with the mobile phone, it is recommended that you change the phone for testing;

In case of traffic capping, it will also lead to the inability to access the Internet;

The number has not been registered with the real name, and the real-name registration has not been completed within the time limit, and the service will be suspended;

3. If the above situation is not the case, it is recommended that you contact the manual customer service of Unicom in the place where you belong for consultation, and the actual situation is subject to the local policy.

Ask how to see the parameter settings of the mobile phone.

A1As the official sales channel of the iPhone, Apple's official website will of course provide detailed information about the configuration parameters of the mobile phone on the official website, so you can check the configuration parameters of mobile phones or computers that are still on sale on the official website on Apple's official website.

2。After entering Apple's official website, click on the "=" menu bar in the upper left corner, and then select the iPhone or Mac product you want to view, as shown in the figure, the products currently on sale will be displayed: iPhone12Pro, iPhone12, iPhoneSe, iPhone11, iPhoneXR.

3.Click on the specific iPhone product you want to view, click the drop-down menu on the right side of the displayed product name, as shown in the figure, click "Technical Support", you can enter the detailed configuration parameters page of the product.

4.After the above operations, you will enter a webpage that displays detailed configuration parameters, some of which are shown in the figure below, including parameters such as appearance, capacity, size and weight, display, and camera.

Question: I'm going to ** set the parameters of the phone.

Question: Then I'll go to **Set mobile data options, apn and name.

A3Select "Advanced Options" Fill in the corresponding information in turn: network type - ipv4, **server address, **port number -80, and other items can be left unfilled Press "Options" and select "Exit".

Question: Isn't this an iPhone? I didn't find the tool.

No matter what mobile phone is restored, the first time you connect to wifi, you must re-type the account and password. In the future, there is no need to type an account and password.

After the iPhone resets the network settings, it sees that you are connected to WiFi. But because of the welcome and mobile phone. Previous memories.

Check your wireless router.

Here's how:

First of all, check whether the wireless router is working normally, you can use other mobile phones or digital products to connect to the wifi signal, if you can connect and surf the Internet normally, then generally this router can work normally.

The phone is turned on to sleep and the network is turned off.

Check whether the phone has the option to turn off the network in the dormant state, the phone will be disconnected after a period of time or cannot receive the background chat software, the possible reason is that the phone is turned on the function of turning off the network by mistake.

If you use the router for a long time, the router may freeze its death. Just restart your wireless router.

The type of certification is not suitable. Try to change the authentication type of the router, it is better to choose the secure "WPA2-PSK" type mode, and the following encryption algorithm is better to choose "AES".

The network settings of the mobile phone or router are abnormal. Consider restoring your router factory settings and cellular network settings.

If you can't connect to the wifi, check if it's a problem with the router itself. Under normal circumstances, even if you restore the network, you can connect to the wifi settings. As long as the router's lights are normal, then the wifi can be connected.

After resetting the network settings, the reason why I can't connect to Wi-Fi is because the previous password has been erased, so I need to re-enter the Wi-Fi password to connect.

After the phone restores the network, you need to re-enter the password to connect normally. Click Connect, re-enter the password, and it should be done.

iPhone phone can not connect to wifi after resetting the network settings, this is because you reset the network settings, the previous network settings to clear, so there will be no connection to wifi, just need to manually set it again.

If you can't connect to the wifi after resetting the network settings on your iphone, it may be that the wifi password is misentered, re-enter it or the router has set a limit, you can check the relevant settings of the router.

After the iPhone resets the network settings, then reconnect to the network, if it is an encrypted WiFi network, you need to re-enter the WiFi password to connect.

Restore the network settings have to be all set again, such as your home WIF name, enter the password on it, I hope it can help you.

Summary. 2. The solution to the problem of not finding the wireless signal: the wifi signal is set to hidden, you need to contact the network management to obtain the wireless signal name, and manually enter the wireless signal name and password in the mobile phone [Settings] - [Wireless LAN] or [WiFi] - [Other Networks], if you still can't connect, you can enter the phone's [Settings] - [General] - [Restore] - [Reset Network Settings] (This will restore all network settings, including Wi-Fi passwords, VPN and APN settings, Please make sure that the phone is unlocked, not jailbroken, and can be turned on and off normally); If the router is faulty, try restarting the router;

The iPhone can't connect to wifi after resetting the network settings

Hello! There are several situations where the Apple mobile phone cannot connect to wifi normally: 1. Confirm the solution to the wrong password input:

Check whether the password is entered incorrectly or the characters filled in are capitalized and lowercase, the number of digits entered in the password is too long or too short, and there may be too many wireless network users, try to connect later;

2. The solution to the problem of not finding the wireless signal: the wifi signal is set to hidden, you need to contact the network management to obtain the wireless signal name, and manually enter the wireless signal name and password in the mobile phone [Settings] - [Wireless LAN] or [WiFi] - [Other Networks], if you still can't connect, you can enter the phone's [Settings] - [General] - [Restore] - [Reset Network Settings] (This will restore all network settings, including Wi-Fi passwords, VPN and APN settings, Please make sure that the phone is unlocked, not jailbroken, and can be turned on and off normally); If the router is faulty, try restarting the router;

3. Prompt connection to wifi is rejected solution: The router device may have turned on wireless MAC address filtering, it is recommended to contact the network management to add the MAC address of the mobile phone. The MAC address can be viewed in [Settings] - [General] - [About This Mac]; The router is faulty, try to restart the router;

4. After entering the password, the verification failure solution is prompted: go to [Settings] - [Wi-Fi] or [Wi-Fi] on your phone, tap [i] on the right side of the Wi-Fi to ignore, and then tap [Ignore this network];

5. After entering the password, it prompts WPA2 PSK to protect Solution: This prompt is caused by the incompatibility between the mobile phone and the router encryption mode, contact the network management or set the router encryption level through the computer to reduce the WPA WEP level to WPA WEP level, and connect again; If the router is faulty, try restarting the router;

None of this seems to work.

The wifi is grey out.

How to get an oblique rod.

Hello, you can do it as follows: open Apple General Settings and select the "Transfer or Restore iPhone" option.

Jump to the Transfer Restore page and tap the Restore feature.

The restore menu pops up, and tap "Reset Network Settings" to restore it.

Summary. The wifi signal is set to hidden, you need to contact the network management to get the wireless signal name, in the mobile phone [Settings] - [Wireless LAN] or [WiFi] - [Other Network], manually enter the wireless signal name and password connection, if you still can't connect, you can enter the phone's [Settings] - [General] - [Restore] - [Reset Network Settings] (This will reset all network settings, including Wi-Fi passwords, VPN and APN settings, Please make sure that the phone is unlocked, not jailbroken, and can be turned on and off normally);

The iPhone can't connect to wifi after resetting the network settings

There are several situations where the iPhone cannot connect to wifi normally:

1. Confirm the wrong password input solution: check whether the password is entered incorrectly or the characters filled in are case-sensitive, and the number of digits entered in the password is too long or too short, and there may be too many wireless network users, try to connect later.

The wifi signal is set to hidden, you need to contact the network management to get the wireless signal name, in the mobile phone [Settings] - [Wireless LAN] or [WiFi] - [Other Network], manually enter the wireless signal name and password connection, if you still can't connect, you can enter the phone's [Settings] - [General] - [Restore] - [Reset Network Settings] (This will reset all network settings, including Wi-Fi passwords, VPN and APN settings, Please make sure that the phone is unlocked, not jailbroken, and can be turned on and off normally);

If the router is faulty, try restarting the router;

Still can't get it.

Method 2: 1. Open iTunes on your computer, select iTunes Store and log in with your account. 2. Click on the bottom right corner. icon to select another country in the refreshed page.

3. Sync with your iPhone in iTunes, and disconnect your phone from your computer when you're done. 4. Go to the Store option in iPhone settings and cancel your account. 5. Open the App Store program and see if it's ready.