Apple 6 fingerprint unlock can t be used, and I can t set it up

1. Restart your iPhone6

Plus Sensitive Fingerprint Recognition.

iphone6

plus, restart the nose of the camera to enter the system to unlock, use fingerprint unlock, you need to enter the screen password to enter the system to unlock the fingerprint, and the home needs to be eliminated first;

2、iphone6

Plus fingerprint recognition, home button, or finger clean.

Wait for iphone6

PlusHome button or finger sweat or stains affect iPhone6

Plus fingerprint recognition sensitivity is recommended to check the finger home button for dust, sweat or its cleanliness to wipe it to solve the problem.

3. The finger position is not swinging.

The author uses an iPhone6

The position of the finger waiting for the plus fingerprint recognition is not placed accurately, or the placement of the finger is different from the previous entry, and it is found that the sensitivity of fingerprint recognition is affected to a certain extent, and it is recommended to adjust the position of the finger to solve the problem.

4. Reset iPhone6

Plus fingerprint recognition settings.

The exclusion is still the current iPhone 6

Plus Fingerprint Sensitivity: It is recommended to delete the original fingerprint and re-enter the new fingerprint information, that is, it is recommended to enter the fingerprint for comparison.

Find the settings first.

How to set up fingerprint unlock on Apple 6, detailed **steps.

After clicking on Settings, tap Touch

ID and password.

How to set up fingerprint unlock on Apple 6, detailed **steps.

If you have previously set a password, you will need to enter it.

How to set up fingerprint unlock on Apple 6, detailed **steps.

After entering, first make sure that those two items are turned on as shown below, and then click Add Fingerprint below.

How to set up fingerprint unlock on Apple 6, detailed **steps.

Put your finger on the home button, record your fingerprint, put it on repeat, and remove it again until the reminder is complete.

How to set up fingerprint unlock on Apple 6, detailed **steps.

After recording the fingerprint in the middle, the edge of the fingerprint should also be recorded, and repeat according to the previous method.

How to set up fingerprint unlock on Apple 6, detailed **steps.

How to set up fingerprint unlock on Apple 6, detailed **steps.

Once you're done, you're good to go.

How to set up fingerprint unlock on Apple 6, detailed **steps.

The fingerprint you just recorded can be used to unlock it.

How to set up fingerprint unlock on Apple 6, detailed **steps.

Here's how to fix it:1. Open your phone to find the settings and click to enter the settings page, as shown in the figure below

<>4. Then click on the "Change Password" option as shown in the figure below

5. After clicking, enter the current iPhone passcode to verify on the pop-up verification page, as shown in the following figure:

6. After entering the correct iPhone password, you can jump out of the change password page, as shown in the following figure, and enter the new password in the dialog box, as shown in the following figure:

First find the "Settings" icon on your phone's home screen, tap to open, in the settings list, find the "General" option, tap to enter, in the general list, find the "Touch ID & Passcode" option, click to enter, if you are entering here for the first time, the system should prompt you to set a password to lock your phone to unlock. This password can be a simple 4-digit password or a complex combination of numbers and letters. Enter the same password for the second time, then in the Touch ID and password list, find the "Touch ID" option, click to enter, and then click the "Add Fingerprint" option, then the system will prompt you to put the finger you want to set the fingerprint on the "Home screen" button, please touch the Home button on the home screen with your finger, and touch it with your finger repeatedly until the system completes its fingerprint recording, and when the fingerprint is recorded, it will continue to record the edge fingerprint of the finger. Since the position of the home button touched by the finger will be different each time, the system will prompt that the edge fingerprint of the finger will be calibrated in order to increase the accuracy of fingerprint recognition. Repeatedly touch the home button on the home screen with the edge of your finger until the system records the complete fingerprint record information on the edge of your finger, wait for the fingerprint recognition setting animation to turn red, the system will prompt that the fingerprint setting is successful, click the "Continue" button, if you want to add more fingerprints, repeat the operation according to the above method, you can add up to 5 fingerprint records. Once you've set it up, lock your iPhone and try to unlock it with your finger.

iPhone 6 fingerprint unlock can't be set for the following reasons:

1. The fingerprint identification sample is not standard when entered, and the fingers are oily or wet.

2. There is a problem with the home button and related parts of iPhone6 Plus, and the fingerprint cannot be scanned correctly.

3. Finger injuries have left scars.

4. The unlocked finger is not the same as the finger you entered before.

5. It may be that the fingerprint is too shallow.

1. Keep your fingers dry when entering fingerprints.

2. Fingerprints are entered on both the left and right hands.

3. When unlocking, if your fingers are wet, or there are food crumbs sticking to them, or your fingers are very oily, wipe your fingers dry with a paper towel, which can greatly improve the success rate of fingerprint unlocking.

You can give it a try by following these steps:

1 Settings - General - Password & Fingerprint.

2. Open the password (if you have already set the fingerprint during the activation process, you can skip this step and add the fingerprint directly, and you can register up to 5 fingerprints).

3. Select Add Fingerprint.

4. Start setting the fingerprint and put your finger on the home button.

5. The fingerprint will not be set up at one time, you need to repeat the action according to the prompts, and then lift your finger after placing it, and then place it again.

6. If it fails, you can go back and try again until it succeeds.

7. Click Continue, you can set the recorded fingerprint, or you can choose to continue to add the fingerprint, if you need to delete the fingerprint set before, you can click the button in the upper right corner.

After setting the fingerprint, you still need to enter the digital password for the first unlock, and then you can directly perform fingerprint recognition. If you find that your fingerprint cannot be recognized, you can use digital unlocking to avoid worry.

Reason: 1. Restart iphone6 plus, fingerprint recognition is sensitive, iphone6 plus restart the first camera to enter the system to unlock, use fingerprint unlock, you need to enter the screen password to enter the system before fingerprint unlocking, and you need to eliminate the fingerprint first.

2. iPhone6 Plus fingerprint recognition home button or finger clean, due to iphone6 plus home button or finger sweat or stains affecting iphone6 plus finger recognition sensitivity, it is recommended to check whether the finger home button is dust, sweat or its clean anti-wipe solution.

3. The finger position is not placed, the author uses iphone6 plus fingerprint recognition waiting finger position is not accurate, or it is different from the previous fingerprint waiting finger placement, and it is found that the sensitivity of fingerprint recognition is affected to a certain extent, and it is recommended to adjust the finger position to solve the problem.

4. Reset the iPhone6 Plus fingerprint recognition settings, the exclusion is still the same, the iPhone6 Plus fingerprint is sensitive, it is recommended to delete the original fingerprint, and re-enter the new fingerprint information, that is, it is recommended to enter the finger fingerprint.

Method: 1. First open the "Settings" app on the screen.

2. Find the "Touch ID & Passcode" column in the settings list and click to enter.

3. Next, please enter your password.

4. Then you can select the current finger data that is not effective in fingerprint recognition, swipe to the left and click "Delete".

5. After deleting the fingerprint, click the "Add Fingerprint" option again to re-enter the fingerprint data.

6. Then re-record fingerprint data according to the prompts, if there is no response to the fingerprint data recorded here, it is likely to be a hardware problem with the mobile phone, indicating that the fingerprint recognition hardware is faulty and needs to go to Apple after-sales for further detection and processing.

It's hard to judge with just one ** Take it to the mobile phone store and try it.

What is displayed when set? Or can't you get in?