What functions can be achieved through the Tianyi Gateway mobile client?

Summary. Hello, dear, the method of connecting the Tianyi gateway through the switch to achieve wireless Internet access is as follows

Step 1: Set the [Wireless Password] and [Administrator Login Password] of the wireless router separately.

Step 2: Prevent the IP address of the wireless router from being the same as the IP address of the switch, resulting in the inaccessibility of the wireless router after networking, and the IP address of the wireless router needs to be set again; If it was before, you can set it to .

Step 3: Plug the network cable connected to the LAN port of the switch into the Inernet port of the wireless router.

Step 4: Then, connect your laptop to wireless and you can access the Internet through Wi-Fi.

Connect to the e-Surfing gateway through a switch to achieve wireless Internet access.

Hello, dear, the method of connecting the Tianyi Buji gateway through the switch to achieve wireless Internet access is as follows: Step 1, first set the [typeless and parallel password] of the wireless route separately, and [the administrator login password booth]. Step 2: Prevent the IP address of the wireless router from being the same as the IP address of the switch, resulting in the inaccessibility of the wireless router after networking, and the IP address of the wireless router needs to be set again; If it was before, you can set it to . Step 3: Plug the network cable connected to the LAN port of the switch into the Inernet port of the wireless router.

Step 4: Then, connect your laptop to wireless and you can access the Internet through Wi-Fi.

Connect the eWing gateway and the laptop with a network cable, what is the reason why the light signal light flashes red.

Before repairing, be sure to check to see if your phone is in arrears, or has just been in arrears. As long as the payment is in arrears, you must power off the modem and restart it after the payment is completed. If the optical modem flashes a red light, please plug in the head or household optical fiber, the red light is not extinguished, it is not only the optical fiber discount nest light is excited, or the outside light lead is broken, you can only report for repair and call the operator immediately.

1).After logging in with Tianyi account, click the "Gateway" page and click the bind button;

2).Connect to the gateway wifi, you can connect to the wifi by scanning ***; After clicking "Scan to connect to wifi", if the scan cannot be successful, please click "Manual Simple Connection" to connect to the eSurfing gateway wifi by manual connection.

3).After connecting to the gateway Wi-Fi, the client automatically determines whether the gateway service is activated as soon as possible, and if the gateway service is not activated, the gateway service needs to be activated and bound again. If the gateway service has been opened (Internet access), it will automatically enter the binding process.

4).The client prompts you to enter the useradmin password (if you have not changed the useradmin password and connect to wifi by scanning ***, you do not need to enter it manually), enter the password and click Next;

5).Determine the binding.

Recently, some users of Mercury routers have found that the setting ** has changed the Tianyi gateway, this problem is still very annoying, and I will bring the solution below, come and take a look!

Why do I enter the settings of the Mercury router in the browser**, and after opening it, it shows the dismantling and ignition information of the Tianyi gateway, instead of the settings page of the Mercury router.

1. The Mercury router is connected incorrectly.

2. IP address conflict.

Mercury router settings**How to change the Tianyi gateway problem solution 1

Mercury Router Settings** opens the telco login screen.

1. The Mercury router is connected incorrectly

Error Cause Analysis:

If you connect the telecom modem to one of the LAN ports of the Mercury router, the computer will also use a network cable to connect to the other interfaces in the LAN of the Mercury router.

At this time, enter the Mercury router settings in the browser**(, and the Tianyi gateway (telecom optical modem login interface) will be displayed.

Properly connect the Mercury router:

The WAN interface on the Mercury router is used to connect optical modems; The LAN (1234) interface is used to connect to a computer. So, please follow this requirement to check and reconnect your Mercury wireless router.

Mercury router settings**How to change the Tianyi gateway problem solution 2

The telecom optical modem is connected to the WAN interface of the Mercury router.

In general, follow the requirements above after properly connecting your Mercury router. Enter the Mercury router settings in the browser**, and the settings page of the Mercury router will be opened, and the Tianyi gateway (telecom login) information will not appear.

2. IP address conflicts.

Some models of Mercury wireless routers, even after connecting properly as required above. When you enter Mercury Router Settings** in your browser, the eSurfing Gateway (telco login page) information will still be displayed.

The solution is:

Modify the IP address of the Mercury router, and use the new IP address after the modification, you can open the interface of the Mercury router setting.

1. Unplug the network cable connecting the Mercury router and the optical modem, and only let the computer connect to the LAN interface of the Mercury router for the time being.

Mercury router settings**How to change the Tianyi gateway problem solution 3

Disconnect the Mercury router from the modem.

2. Then enter the Mercury router settings in the browser**, and then you can open the Mercury router settings interface.

Mercury router settings**How to change the Tianyi gateway problem solution 4

Start by opening the Mercury router settings screen.

Mercury router settings**How to change the Tianyi gateway problem to solve the problem of ant Yu quietly 5

Change the IP address of the LAN port of the Mercury router.

4. Reconnect the telecom modem to the WAN interface of the Mercury router.

Mercury router settings**How to change the Tianyi gateway problem solution 6

Then connect the telecom modem to the WAN interface of the Mercury router.