Philips rechargeable razor should not be fully charged or photoelectric if it is not used for a long

Generally, the built-in battery of the shaver is lithium battery, and it can not be used up for a long time, so the battery will have a large permanent loss of capacity when stored for a long time, and it is not good to place it when fully charged, the best is about 60% of the power storage, but it is not easy to calculate how much power is left, so it's almost on the line, not out of power or full charge, the built-in lithium battery in the general shaver is not good, it won't take long to break, or the capacity is declining, and the charging is becoming more and more frequent, One flush is full, and one is used up.

In fact, it is almost the same when it is fully charged or used up, and the battery will slowly reduce its capacity as long as it is used, which is inevitable, but the battery of the Philips shaver is still good, and it can be used for a long time.

In addition, it is impossible to use up the shaver in a day every time it is fully charged, and some of them are not shaved every day, so it will take many days to completely use up the power on a full charge, which feels similar to using it for a long time. And I usually use things if they haven't used them for a long time, and if they are using them, they will be filled with photoelectricity, after all, maybe it will take a long time to use them this time, hehe.

Hope mine is helpful to you.

The built-in battery of the Philips rechargeable razor is lithium battery, which cannot be used up for a long time, so the battery will have a large permanent loss of capacity if stored for a long time.

"Lithium battery" is a type of battery that uses lithium metal or lithium alloy as the anode material and uses a non-aqueous electrolyte solution. In 1912, lithium metal batteries were first developed by Gilbert NLewis proposed and studied.

In the 70s of the 20th century, m s.Whittingham proposed and began research on lithium-ion batteries. Due to the very active chemical properties of lithium metal, the processing, storage and use of lithium metal have very high environmental requirements.

The Philips shaver is fully charged. If the new shaver is not charged, it is a quality problem, but it is often used for a few years or a long period of time for early hermits, this situation will occur, this is not a battery problem, but the charger step-down rectifier part of the current limiting resistance deterioration caused, most of the resistance problem, understand the electronic circuit and can read the diagram of the person can find this component, on the circuit board along the 220V electrical wiring printed circuit board.

Figure, find a current-limiting resistor, slightly larger than other resistors, the resistance value of this Zheng or a resistor is about 68, its function is to limit the current, and then the voltage after its current limiting is reduced by the capacitor and the current is limited, and finally through the diode.

The rectified voltage charges the battery of the or after the rectification, and the full voltage is for the shaver motor. Because it has been used under the impact of high-voltage current, it is easy to cause heat.

Deterioration, the resistance value of the change increases, sometimes increases to several megaohms, such a large resistance, can be regarded as an open circuit or open circuit state, sometimes up to a few thousand ohms of resistance value, the current limit is enhanced, the current flowing through it is very small, most of the current is blocked by it, so the current after it is limited and then rectified by the diode, to charge the battery The current is very small, which will cause the situation that it cannot be charged or cannot be charged, most Philips shavers can not be charged, it is the problem of this resistance, you can change a resistance value in 100 Within the resistor, the power is 1 2W, because it is a heating element, so the power should be larger.

If you have the ability to make and repair electronics, you can do it yourself, which is very simple, otherwise you can only rely on people who understand maintenance.

Summary. First, the cause analysis of similar charging problems:

1. The battery is damaged. 2. System failure. 3. Charger reasons or poor contact.

Second, the solution:

1. Try to change to another charger or data cable, or clean the charging port.

2. Boot into recover mode, select advancsd advanced mode, select wipe battery, and clear battery traces.

3. Restore the factory settings to see if it is the system reason.

4. If the battery is damaged, it can only be sent for repair and replacement.

What should I do if my new Philips rechargeable shaver will not be charged for a few years?

Kiss will get back to you right away.

1. Analysis of the causes of similar charging problems: 1. The battery is damaged. 2. System failure.

3. Charger reasons or poor contact. 2. Solution: 1. Try to change to another charger, or data cable, or clean the charging port.

2. Boot into recover mode, select advancsd advanced mode, select wipe battery, and clear battery traces. 3. Restore the factory settings to see if it is the system reason. 4. If the battery is damaged, it can only be sent for repair and replacement.

Summary. Charging instructions.

When charging is complete, there will be a green light flashing to indicate that the charge is fully charged.

The normal charging time is 8 hours.

The first charge should be between 12 hours and 24 hours. If it cannot be reached, it will cause the razor battery to not be fully activated, which will affect the future battery storage function.

The charging time of the Philips shaver is based on the model, you can take a look at the manual. If it has a fast charging function, it is generally about 1 hour. If there is no fast charging function, it will generally be charged for 8 hours.

Before the first use, if there is residual virtual power in it, it is recommended to use up the electricity before charging, and let the shaver be charged for at least 8 hours for the first use, so that the battery can reach a saturation state, and it can also be charged for 12 hours.

This is a 1-hour full charge, and then the battery life is 50min, a very powerful shaver, and there is a manual on the official website to check it.

How long does it take for the Philips electric shaver to be charged for the first time.

Charging instructions.

When charging is complete, there will be a green light flashing to indicate that the charge is fully charged.

The normal charging time is 8 hours.

The first charge should be between 12 hours and 24 hours. If it cannot be reached, it will cause the razor battery to not be fully activated, which will affect the future battery storage function.

The charging time of the Philips shaver is based on the model, you can take a look at the manual. If it has a fast charging function, it is generally about 1 hour. If there is no fast charging function, it will generally be charged for 8 hours.

Before the first use, if there is residual virtual power in it, it is recommended to use up the electricity before charging, and let the shaver be charged for at least 8 hours for the first use, so that the battery can reach a saturation state, and it can also be charged for 12 hours.

This is a 1-hour full charge, and then the battery life is 50min, a very powerful shaver, and there is a manual on the official website to check it.

Charging instructions.

When charging is complete, there will be a green light flashing to indicate that the charge is fully charged.

The normal charging time is 8 hours.

The first charge should be between 12 hours and 24 hours. If it cannot be reached, it will cause the razor battery to not be fully activated, which will affect the future battery storage function.

The charging time of the Philips shaver is based on the model, you can take a look at the manual. If it has a fast charging function, it is generally about 1 hour. If there is no fast charging function, it will generally be charged for 8 hours.

Before the first use, if there is residual virtual power in it, it is recommended to use up the electricity before charging, and let the shaver be charged for at least 8 hours for the first use, so that the battery can reach a saturation state, and it can also be charged for 12 hours.

This is a 1-hour full charge, and then the battery life is 50min, a very powerful shaver, and there is a manual on the official website to check it.

Generally speaking, the service life of Philips rechargeable razor batteries is about 5 years. If it is close to this time, or exceeded, it is likely that the rechargeable battery has aged and affected its use.

Most of the rechargeable batteries of Philips shavers use nickel-cadmium batteries, and after a period of use, the battery will have a memory, and the storage capacity will be lower and lower, so it will often run out of power after charging. The main aspect of the impact is the use of electricity, and it generally has nothing to do with the effect of the razor. It is recommended that you go to your local Philips small household appliance after-sales service center for repairs.

When charging your Philips shaver for the first time or after a long time, the battery starts charging very slowly to prevent damage to the device. This means that the charging indicator on the shaver may not flash for the first few hours. Wait for the shaver to be charged for at least 2 hours before checking the charging status.

If the shaver still won't charge, there may be another problem.

It is recommended that the shaver be cleaned frequently to avoid problems such as battery damage.

Try it again... Don't charge it for too long... About 5 hours...

The Philips shaver is like this, and so am I, I bought it on JD.com, and I just bought it and charged it for 12 hours, and after using it once, the power was sufficient, and it couldn't be rotated.

My charge can only be used once, if I don't use it after charging, there will be no power at all the next day, and I found that Philips is really not worth it**.

Mine is the same, I bought it at Vipshop, and after it was fully charged, I ran out of power after two or three uses! What a thing?

In your case, the battery may be broken, if it is within the warranty period, take it to the after-sales service to repair.

I don't know if the landlord's charging method is right, the first charging time will be a little longer, you can see the instructions for details. If there is no problem with charging, it means that there is a problem with the battery, which is more troublesome and has to be sent to the after-sales service for maintenance. I usually go to Tmall's Philips*** to buy, all of them are **, 2 years warranty.

It should be a battery problem Philips sells expensive, so the quality is absolutely passable I bought it in June and it is still in the two-year national warranty Free all kinds of repairs are not good for him to change to a new one, hehe, the advantage of the joint warranty.

Philips shaver is not charged and used once and then used again, what is the reason.

It shows that the shaver's battery is not working, although it looks fully charged, but the number is very empty, showing 100%, but it is not actually 100%. What is the reason why a shaver dies after only a few minutes of use when fully charged? The shaver is full as soon as it is charged, and there is no power as soon as it is used The head of the shaver or the machine itself is also faulty, the energy consumption is too high, the internal parts of the machine are aging, the cutter head is sluggish, and it takes a high energy to drive the shaver to be fully charged and run out of power after only a few minutes of use?

As soon as the shaver is charged, it will run out of power as soon as it is used Check whether there is a problem with the charger first, and replace one if there is a problem. If you rule out the charger problem, check whether the charging port is in contact with the problem. If there is no problem, it is determined that it is a battery problem.

The battery needs to be replaced.

How long does it take for the first charge of the Philips electric shaver Hello dear, the charging time of the Philips shaver is based on the model, you can take a look at the manual. If it has a fast charging function, it is generally about 1 hour. If there is no fast charging function, it will generally be charged for 8 hours.

Before the first use, if there is residual virtual electricity in it, it is recommended to use up the electricity before charging, and the first use time to charge the shaver for at least 8 hours, so that the battery reaches a saturated state, you can also charge it for 12 hours, I hope it can help you.