How to maintain DJI Royal batteries for a long time?

1.When the device is not in use, the battery should be removed and stored separately.

2.Do not place the battery in an area close to a heat source, flammable or explosive.

3.Avoid placing the battery outdoors at low temperature for a long time, otherwise the battery activity will be greatly reduced, and even cause an irreversible decline in the performance of the lithium battery.

4.Keep the storage environment dry and do not leave the battery in a location where water leakage and moisture may occur.

5.If you do not use the battery for more than 10 days, discharge the battery to 40% to 65% of the optimal storage capacity for storage, and do not place it in a fully discharged state for a long time, so as to avoid the battery entering the over-discharge state and causing damage to the battery, otherwise it will not be able to resume use. It is recommended to recharge and discharge once every 2-3 months to ensure the battery is active.

And when stored for a long time, be sure to store in an environment within the range of -10°C and 45°C.

Turn on the battery and statically discharge it to less than 8% battery level or until the battery turns off automatically. The battery level can be checked through the DJI Pilot app. It is not recommended to turn on the motor to avoid increasing motor wear.

Fast discharge: Install the battery in the aircraft, fly outdoors to the low battery alarm and land automatically, and continue to discharge until the battery level is below 8% or until the battery automatically shuts down.

Indicates that the battery is broken. Dead horses can be used as live horse doctors.

Test the voltage of the battery first, if there is, then use high-voltage charging to see if it can be charged, if it can be charged, immediately switch to normal charging.

If there is no voltage at both ends of the test battery, it can be charged with a high-voltage capacitor and then shocked the battery. If there is voltage after the electric shock, it may be charged.

If the flight battery cannot be charged normally, follow the following methods to troubleshoot:

1.Use the official DJI charger and charging cable for charging.

2.If the battery is stored for a long time and cannot be charged without use, the battery may be damaged by overdischarge;

3.If the device battery has just been used up, it cannot be charged normally, and it is recommended to wait for it to cool down before charging;

4.Check whether the indicator light is on during charging, if the indicator light is not on, please try to replace the charging facility or whether the battery is charging the facility;

5.If the charging indicator is on and cannot be charged, please check the light and <>

6.If the charging hub is used to charge multiple batteries, the charging hub will charge them in order from high to low according to the remaining power, and fill them one by one;

7.The optimal temperature for charging the device is 5-40, if the temperature is too low or too high, it will not be able to charge;

If the rubber is still unable to charge after the above investigation, the battery and the whole set of charging equipment will be sent back for testing

If the battery has not been used for a long time and cannot be charged, the battery can only be replaced.

DJI Mavic Pro battery storage for a long time, the power is gone, and now the charge is not an insider in the related industry, and there is a shortage of cashiers, I have no way to solve this hidden problem, I dare not give you easy methods and suggestions, please consult relevant personnel to give you the correct answer.

1.It is necessary to confirm whether the battery temperature will be too high or too low, such as the battery that has just been used, Bu Coarse first place the battery and wait for the temperature to drop before charging; 2.It is necessary to confirm whether the charging environment exceeds 5°C to 40°C; 3.

It is recommended to use the original charging cable that comes standard with the device; 4.It is necessary to confirm whether the matching power adapter is compliant, and it is recommended to replace the power adapter to try charging; 5.If the battery type cannot be charged due to long-term use, please charge the battery for more than two hours to see if it can be charged.

If the battery is not used for a long time, please store it as follows:

1.When the device is not in use, the battery should be taken out and stored separately;

2.In areas far away from heat sources, flammable and explosive materials, the ideal storage temperature is 22 -28;

3.Keep it dry, do not place the battery in a location that may leak or be wet, and avoid long-term storage in a low temperature environment;

4.If the battery is not used for more than 7 days, please discharge the battery to 30%-50% power and store it, if the battery is not used for a long time, it is recommended to charge the battery to higher than 65% power and turn on the storage self-discharge mode;

5.Do not leave it in a fully discharged state for a long time, it is recommended to recharge and discharge once every 2-3 months to ensure the battery is active.

Dear, hello, I will now come to your above question, according to the information I inquired, DJI Mavic 2 battery is in normal use, if there is an abnormal situation, you need to perform the battery recovery operation, the method is as follows:1Turn off the power of the Miyak2 aircraft and all its accessories, and make sure that the Mikano 2 battery has been completely powered off and powered off.

2.Use the original detachable charger plug to connect the battery charger socket to the wall power socket. 3.

Start charging, and observe that the Mavic 2 battery will flash irregularly, indicating that the battery is performing recovery bit operations. 4.When the indicator light on the battery returns to normal, the Mavic2 battery has successfully performed the recovery bit operation, and the charger can be unplugged at this time.

It should be noted that the battery recovery operation only needs to be performed when the battery is abnormal, and should not be operated frequently to avoid damage to the battery itself while maintaining the battery. At the same time, in order to ensure the safety and stability of the Royal 2 battery, you must follow the specifications in the battery draft macro shouting instruction manual when using.

Dear, hello, I'm glad to answer for you that the DJI Mavic 3 battery has not been filled overnight Solution 1It is necessary to confirm whether the battery temperature is too high or too low, such as a battery that has just been used, place the battery and wait for the temperature to drop before charging; 2.It is necessary to confirm whether the charging environment exceeds 5°C to 40°C; 3.

It is recommended to use the original charging cable that comes standard with the device; 4.It is necessary to confirm whether the matching power adapter is compliant, and it is recommended to change the power adapter to try charging; Please make sure that the power supply is normal, try to plug in the power cord again, or change the charger port to charge, if the battery cannot be charged due to long-term use, please charge the battery for more than two hours to try whether it can be charged. If it still can't be solved, please record the battery charging process (including indicator reaction), and in "DJI Service"***, return to the complex digit, and you will be connected to the manual customer service.

Comparatively more professional. Most of the battery is broken, at this time observe whether the battery is bulging, if there is a bulging phenomenon, don't use it again, replace it.