Kneel and beg for a 1 144 Gundam no inner structure with good articulation, and hurry! Urgent! Urg

Thirtieth anniversary of the assault 1:144 ** at 130 to 140 yuan.

And it's Bandai's.

There are water stickers, fingers can be moved, there is a skeleton, and the stickers are all !! Better than the normal 1:144.

Personally, I recommend HGUC's Hazel series.

HGUC 069 Hazel Unit 2, 1500 yen, 7 counts 105

MG is 1 100, RG is 1 144, RG is to highlight the realism with a lot of stickers and skeletons, because it is 1 144, so the articulation is not particularly good, and MG's articulation is still good, and the stickers and details are good. However, it is generally a little more expensive than RG.

Different models have different heights··· The so-called 1 100 and 1 144 also depend on how tall the original model setting is, for example, with the same 100 scale, the unicorn is more than a head higher than the earth and freedom.

In the picture just taken, from left to right, there are 100 unicorns, 100 earth deaths, 144 mourning, and 144 assaults. It can be seen that although 100 and 144 are at the same time, the unicorn is much higher than the earth's death, and the funeral is also the same, and the 144 funeral is basically the same as the earth's death. A refill in the funeral hand for a height reference...

The height of 1:144 is between 11 cm and 13 cm (vice versa) and the height of 1:100 is between 20 cm and 23 cm. For example, the Doom Gundam is between 11 and 13 cm when it is made.

...The Gundam set height itself is different. Some 144's are much taller than 100's, and some 100's are closer to 60's height.

Based on the standard height of 18 meters, the height of 100 is 18 centimeters, and the height of 144 is centimeters.

Basically 1 144 heads to 1 100 waists. I use RG's 78-2, mk2, z, and mg ratios.

Take RX-78 as an example, the left side is MG (1 100) and the right side is RG (1 144, the same as Hg) The size of 1 144.

Alas, brother, the question you asked is a bit funny, what is called 1 100, 1 144 This is very difficult to get, because the original body type of each Gundam is not necessarily the same, what model of the original size of the Gundam is dozens of that model, for example, let's say that the GP02 and X1 in my cabinet are both 1 100, but the No. 2 machine is much better than the Pirate X1, and the Pirate is shorter than the shield of the No. 2 machine, as if the RX series is 18 meters, and the cartoon is very short since F91, it seems to be meters.

Please also provide a picture of the other gods, 18 meters, 15 meters.

MGHG, in fact, I still think MG is more fine, if you want to choose, it is still MG good, if you don't have money, it is good to buy HG.

It's about 1:144, 1:100, and 1:

60's, upstairs can see the problem clearly and then try to copy it......The difference in proportion is made according to the size of the Gundam in the animation, and generally the Gundam animation is 18 meters, and 1:100 is 10 centimeters, which is probably it.

It's not a model, it's the 1:1 scale Gundam from the Japan Gundam Remembrance.

There are 8 scales of GUNPLA, and the details are as follows:

1. MEGA is 1:48

2. PG is 1:60

3. The hg is 1:144

4. RG is 1:144

5. MG is 1:100

6. The RE is 1:100

7. The FG series is 1:144

8. The TV series is 1:100

MEGA is 1:100, about 40cm, and the joints are well moved. The parts are large but not many, easy to assemble, and the box is large enough to fit all people, but only a few parts have been released.

The PG is 1:60, about 30cm, the fineness is high, the engraving details are many, and the joints are flexible. However, it is expensive, around 1000 yuan, with the most parts, suitable for masters and veterans, and has a perfect skeleton structure.

The hg is 1:144, about 13cm, and special bodies have also produced 1:100 or even 1:

60 scale HG model with better shape and medium articulation but less detail. There are not many parts, the box is small, it is more popular, suitable for novices, a few parts of the HG have a streamlined skeleton, and most of them are hollow.

The RG is 1:144, which is the same ratio as Hg, and the joints are better moved. **Above 110 RMB, the parts are medium, the box is small, suitable for veterans, there are more details, there is a one-piece skeleton, but due to the small proportions, the skeleton is more fragile.

mg is: 100, fine shape, reasonable joint movement. There are generally more parts, more carved details than RG, and most of the later models have a complete skeleton structure, which is suitable for veterans who often play Gundam.

With a RE of 1:100 and the size of MG, it is designed with a convincing shape through rigorous setting research, and is composed of streamlined parts, mainly with MSV and other external setting styles.

The BB series is a miniature GUNPLA, and the style is cute, which is very popular with some fans, and it has also pulled into the pit a group of new people (crossed out, the domestic BB that used to be 2 pieces of a pack at the entrance of the elementary school).

The FG series is 1:144, the appearance is average, basically no color separation, **cheap, suitable for novices.

Most of the TV series are 1:100, and a very small number of models are 1:60 scale, and they are GUNPLAs that were released with the release of TV anime, and they have a streamlined interior that is suitable for fans of anime works.

The general assembly series is divided into 1:144 1:100 1:

60 of these large airframes, 1:400 1:550 finished models, and 1:

35 1:170 1:200 There are also BB (Q version) and smaller gacha toys.

There is an FG version, the most rudimentary, mostly 1 144.

There is an HG version, which is more advanced, and it is also 1 144.

There is also a TV version, which came out with the TV broadcast, which is also 1 144.

There is a mg version, a high-end point, mostly 1 100, and a few deluxe versions have 1 60.

There is also a PG version, the most high-end, mostly 1 60.

I've also seen 1 36 of the cows who don't know where.

The FG version, the most rudimentary, is mostly 1 144.

The hg version, which is more advanced, is also 1 144.

The TV version,Basically the same as HG,Add some details,There are 1 100,There are also 1 60MG version,High-end point,There is an internal structure,More details,It's 1 100,PG version,The highest grade,Full internal structure,It's mostly 1 60。

It's not worth it, the God Gundam is too old to be compared with the new model and version after '04, both the plates and the internal structure.

Within 150, there are only Venerable, Spiegel, Flash, these Gundam in the martial arts legend, but they are all some years old, and Jim, Captain Lybalan's special blue Zagu these edge bodies and some of the spike sell old bodies, there is not much value, and the cheaper mg You can take a look at 3 180 yuan bodies including F91, Z Plus, Zplus A1, these three are good.

MG's Gouge Gundam has an internal structure but is very simple, with a complete skeleton. Mobility is good.

Of course, the three are the most worthy of guessing the source of f91.,It's really good.,But it's sure to be the white one.,There's more weird flower brackets.。

In addition to the size, the articulation of 1 144 is higher than that of 1 100, and usually 1 144 is cheaper and 1 100 is more refined, depending on the situation.

1/144 scale

The 1:144 scale figure, which is about 13 cm high, comes in two different forms: the "normal" version, which has a smaller number of parts, is lower and easy to assemble; The "Premium" (HG) version features improved joints, multi-color injection molding, and a wide range of optional parts and features.

1/100 scale

It is about 16 to 19 cm tall. The assembled model is brought to life through the color casting process. Having an improved clarity that satisfies the most discerning enthusiast is a great feature of this type of figure. “gundam seed destiny”

The figure also comes with a 1:20 scale portrait of the main character and a variety of accessories, such as "cards".

As for**you can go to** search for it yourself, there are imitations, there are bandai**, these** are not the same, if you buy it casually to play, buy pirated copies, it's very cheap, if it's a collection, buy bandai.

Usually a model of 1 144 is 60 80 bucks.

1:100 is good, about 200-450

1:144 about 150-300

Buy a collective about 4000-6500 or so.

The pen of 1:100 is 1:144 big, the color is good, in short, it is recommended to buy the mg version of exia, about 500-700 or so, super handsome.

Long story short, 100 recommended.

The 144 is too small and the range of motion is limited.

The scale of the model refers to the scale ratio of the physical object to the model. Taking exia as an example, the height of the physical object is meters, and the height of 1:100 is 18 centimeters, 1:

144 is 13 centimeters. There is no obvious difference in color, and some details will be overlooked at 1:144 because they are too small to be clear.

The price of the 144 exia is 1,200 yen, which is about 80 yuan in total. The rest of the body** is pretty much the same. 1：

The exia of 100 is 2,300 yen, which is about 150 yuan. There is also a 1:60 exia on the market, which is almost 30 centimeters tall and costs 4,500 yen, totaling about 300 yuan.

If you are interested, you can take a look.

I prefer the bigger ones. The money depends on the merchant and the quality. A lot of them are different. **There are also fluctuations. It's hard to say.

There are megasize, pg, hg, rg, mg, re, bb, fg, and tv.

1. The ratio of MEGA is about 1:48,40cm, which is perfectly shaped and has better movable joints. The parts are large but not large, easy to assemble, large box, suitable for everyone, but only a few bodies.

2. The ratio of PG is about 1:60, 30cm, the fineness is high, and the movable joints are flexible. But ** high, about 1000 yuan, the most spare parts, suitable for masters, with a perfect skeleton structure.

3. The ratio of Hg is 1:144,13cm, the shape is good, and the movable joints are medium. The number of parts is not much, small boxes, more popular, suitable for beginners, hg in several parts of the compact skeleton, mostly hollow.

4. The ratio of RG is 1:144, which is the same as that of HG, with perfect shape and better movable joints. **At more than 110 yuan, the parts are medium, the box is small, suitable for veterans, handsome, and has an overall skeleton, but due to the smaller proportions, the skeleton is more fragile.

5. The ratio of mg is 1:100, the shape is fine, and the joints are perfectly moved. Parts are relatively common, and most later models have a complete skeleton internal structure, which is suitable for frequent veterans.

6. The RE ratio is 1:100, which is as large as MG, and it is through rigorous setup text research to design convincing shapes and simplify components, mainly MSV and other outbound settings.

7. The BB series is a mini senior model with a very cute style, which is unusually loved by some fans, and it has also pulled a bunch of newcomers.

8. The ratio of the FG series is 1:144, which has a general appearance, basically no color separation, and is inexpensive, suitable for beginners.

9. The ratio of TV is 1:100, it is a high-end model, equipped with TV animation, small, suitable for animation fans.

1:60 pg (perfect skeleton, perfectly articulated, but ** all above 800).

1:100 mg (there is a skeleton, the early one may not be a skeleton of the whole body, it is very mobile, ** around 150 and about 450).

60 hg (hg models do not have a skeleton, ** are generally very cheap, 1:144 is about 70 about 150, 1:100 is about 150 to 250, 1:

60 or so from 200 to 300 or so).

1:144 HGC (most of them are models of UC history, but there are also models of G martial arts and so on).

1:144 00hg (all models from the 00 series of animations).

1:144 seedhg (all models from the Seed anime).

1:144 RG (Bandai's new series, the reduction degree of the model, movement, etc. can be comparable to PG, ** around 150).

There is also SD, which is the Q version, FG (1:144, the movement is very poor, mainly for model lovers to paint freely), AG (1:144, new to the AGE series).